Re: [PATCH v2 19/36] soc: fsl: cpm1: qmc: Fix blank line and spaces

[Christophe Leroy <christophe.leroy@xxxxxxxxxx>]

Le 08/08/2024 à 09:11, Herve Codina a écrit :
> checkpatch.pl raises the following issues
>    CHECK: Please don't use multiple blank lines
>    CHECK: Alignment should match open parenthesis
>
> Fix them.
>
> Signed-off-by: Herve Codina <herve.codina@xxxxxxxxxxx>

Reviewed-by: Christophe Leroy <christophe.leroy@xxxxxxxxxx>


> ---
>   drivers/soc/fsl/qe/qmc.c | 10 ++++------
>   1 file changed, 4 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/soc/fsl/qe/qmc.c b/drivers/soc/fsl/qe/qmc.c
> index e2ac3e59bb79..44bd9b949770 100644
> --- a/drivers/soc/fsl/qe/qmc.c
> +++ b/drivers/soc/fsl/qe/qmc.c
> @@ -274,7 +274,6 @@ static void qmc_setbits32(void __iomem *addr, u32 set)
>   	qmc_write32(addr, qmc_read32(addr) | set);
>   }
>   
> -
>   int qmc_chan_get_info(struct qmc_chan *chan, struct qmc_chan_info *info)
>   {
>   	struct tsa_serial_info tsa_info;
> @@ -1411,7 +1410,7 @@ static int qmc_setup_chan(struct qmc *qmc, struct qmc_chan *chan)
>   		qmc_write32(chan->s_param + QMC_SPE_ZDSTATE, 0x00000080);
>   		qmc_write16(chan->s_param + QMC_SPE_MFLR, 60);
>   		qmc_write16(chan->s_param + QMC_SPE_CHAMR,
> -			QMC_SPE_CHAMR_MODE_HDLC | QMC_SPE_CHAMR_HDLC_IDLM);
> +			    QMC_SPE_CHAMR_MODE_HDLC | QMC_SPE_CHAMR_HDLC_IDLM);
>   	}
>   
>   	/* Do not enable interrupts now. They will be enabled later */
> @@ -1604,7 +1603,6 @@ static int qmc_probe(struct platform_device *pdev)
>   	if (IS_ERR(qmc->scc_regs))
>   		return PTR_ERR(qmc->scc_regs);
>   
> -
>   	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "scc_pram");
>   	if (!res)
>   		return -EINVAL;
> @@ -1650,7 +1648,7 @@ static int qmc_probe(struct platform_device *pdev)
>   	 */
>   	qmc->bd_size = (nb_chans * (QMC_NB_TXBDS + QMC_NB_RXBDS)) * sizeof(cbd_t);
>   	qmc->bd_table = dmam_alloc_coherent(qmc->dev, qmc->bd_size,
> -		&qmc->bd_dma_addr, GFP_KERNEL);
> +					    &qmc->bd_dma_addr, GFP_KERNEL);
>   	if (!qmc->bd_table) {
>   		dev_err(qmc->dev, "Failed to allocate bd table\n");
>   		ret = -ENOMEM;
> @@ -1663,7 +1661,7 @@ static int qmc_probe(struct platform_device *pdev)
>   	/* Allocate the interrupt table */
>   	qmc->int_size = QMC_NB_INTS * sizeof(u16);
>   	qmc->int_table = dmam_alloc_coherent(qmc->dev, qmc->int_size,
> -		&qmc->int_dma_addr, GFP_KERNEL);
> +					     &qmc->int_dma_addr, GFP_KERNEL);
>   	if (!qmc->int_table) {
>   		dev_err(qmc->dev, "Failed to allocate interrupt table\n");
>   		ret = -ENOMEM;
> @@ -1711,7 +1709,7 @@ static int qmc_probe(struct platform_device *pdev)
>   
>   	/* Enable interrupts */
>   	qmc_write16(qmc->scc_regs + SCC_SCCM,
> -		SCC_SCCE_IQOV | SCC_SCCE_GINT | SCC_SCCE_GUN | SCC_SCCE_GOV);
> +		    SCC_SCCE_IQOV | SCC_SCCE_GINT | SCC_SCCE_GUN | SCC_SCCE_GOV);
>   
>   	ret = qmc_finalize_chans(qmc);
>   	if (ret < 0)