RE: [PATCH 07/16] reset: rzg2l-usbphy-ctrl: Get reset control array

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Claudiu,

> -----Original Message-----
> From: Claudiu <claudiu.beznea@xxxxxxxxx>
> Sent: Thursday, August 22, 2024 4:28 PM
> Subject: [PATCH 07/16] reset: rzg2l-usbphy-ctrl: Get reset control array
> 
> From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
> 
> Before accessing the USB area of the RZ/G3S SoC the PWRRDY bit of the SYS_USB_PWRRDY register need to
> be cleared. When USB area is not used the PWRRDY bit of the SYS_USB_PWRRDY register need to be set.
> This register is in the SYSC controller address space and the assert/de-assert of the signal handled
> by SYSC_USB_PWRRDY was implemented as a reset signal.
> 
> The USB modules available on the RZ/G3S SoC that need this bit set are:
> - USB ch0 (supporting host and peripheral mode)
> - USB ch2 (supporting host mode)
> - USBPHY control
> 
> As the USBPHY control is the root device for all the other USB channels (USB ch0, USB ch1) add support
> to set the PWRRDY for the USB area when initializing the USBPHY control. As this is done though reset
> signals get the reset array in the USBPHY control driver.
> 

Comment applicable, if the USB PWRRDY signal is modelled as reset signal.

There is no user for this patch. The first user is RZ/G3S and is there is no support yet.
I think you should merge this patch with next one so that there is a user(RZ/G3S)
for this patch.

Cheers,
Biju

> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
> ---
>  drivers/reset/reset-rzg2l-usbphy-ctrl.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/reset/reset-rzg2l-usbphy-ctrl.c b/drivers/reset/reset-rzg2l-usbphy-ctrl.c
> index 1cd157f4f03b..8b64c12f3bec 100644
> --- a/drivers/reset/reset-rzg2l-usbphy-ctrl.c
> +++ b/drivers/reset/reset-rzg2l-usbphy-ctrl.c
> @@ -132,7 +132,7 @@ static int rzg2l_usbphy_ctrl_probe(struct platform_device *pdev)
>  	if (IS_ERR(regmap))
>  		return PTR_ERR(regmap);
> 
> -	priv->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL);
> +	priv->rstc = devm_reset_control_array_get_exclusive(&pdev->dev);
>  	if (IS_ERR(priv->rstc))
>  		return dev_err_probe(dev, PTR_ERR(priv->rstc),
>  				     "failed to get reset\n");
> --
> 2.39.2






[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux