Re: [PATCH 3/4] arm64: dts: qcom: ipq5332: add nodes to bringup q6

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 8/20/2024 4:51 PM, Krzysztof Kozlowski wrote:
On Tue, Aug 20, 2024 at 02:25:16PM +0530, Gokul Sriram Palanisamy wrote:
From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>

Enable nodes required for q6 remoteproc bring up.

Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
Signed-off-by: Gokul Sriram Palanisamy <quic_gokulsri@xxxxxxxxxxx>
---
  arch/arm64/boot/dts/qcom/ipq5332.dtsi | 62 +++++++++++++++++++++++++++
  1 file changed, 62 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
index 0a74ed4f72cc..ec93e7b64b9e 100644
--- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
@@ -145,6 +145,11 @@ smem@4a800000 {
hwlocks = <&tcsr_mutex 3>;
  		};
+
+		q6_region: wcnss@4a900000 {
Why here it is wcnss...
will change it to wcss.
+			reg = <0x0 0x4a900000 0x0 0x2b00000>;
+			no-map;
+		};
  	};
soc@0 {
@@ -476,6 +481,39 @@ frame@b128000 {
  				status = "disabled";
  			};
  		};
+
+		q6v5_wcss: remoteproc@d100000 {
but everywhere else is wcss?
yes, will stick to wcss everywhere.

+			compatible = "qcom,ipq5332-wcss-sec-pil";
+			reg = <0xd100000 0x4040>;
+			firmware-name = "ath12k/IPQ5332/hw1.0/q6_fw0.mdt";
It's one firmware independent of board?

Yes, we have only one firmware across all our boards.

Regards,

Gokul


Best regards,
Krzysztof





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux