Per the RMII specification, the REF_CLK is sourced from MAC to PHY
or from an external source. But for TJA11xx PHYs, they support to
output a 50MHz RMII reference clock on REF_CLK pin. Previously the
"nxp,rmii-refclk-in" was added to indicate that in RMII mode, if
this property present, REF_CLK is input to the PHY, otherwise it
is output. This seems inappropriate now. Because according to the
RMII specification, the REF_CLK is originally input, so there is
no need to add an additional "nxp,rmii-refclk-in" property to
declare that REF_CLK is input. On the contrary, a vendor-defined
property needs to be added if we want the TJA11xx PHYs to provide
the 50MHz RMII reference clock. Therefore, it is more reasonable
to add "nxp,phy-output-refclk" instead of "nxp,rmii-refclk-in".
Signed-off-by: Wei Fang <wei.fang@xxxxxxx>
---
V2 changes:
1. Changed the property name from "nxp,reverse-mode" to
"nxp,phy-output-refclk".
2. Simplified the description of the property.
3. Modified the subject and commit message.
---
.../devicetree/bindings/net/nxp,tja11xx.yaml | 18 +++---------------
1 file changed, 3 insertions(+), 15 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml b/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml
index 85bfa45f5122..eb813f7bf274 100644
--- a/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml
+++ b/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml
@@ -32,21 +32,9 @@ patternProperties:
description:
The ID number for the child PHY. Should be +1 of parent PHY.
- nxp,rmii-refclk-in:
+ nxp,phy-output-refclk:
type: boolean
- description: |
- The REF_CLK is provided for both transmitted and received data
- in RMII mode. This clock signal is provided by the PHY and is
- typically derived from an external 25MHz crystal. Alternatively,
- a 50MHz clock signal generated by an external oscillator can be
- connected to pin REF_CLK. A third option is to connect a 25MHz
- clock to pin CLK_IN_OUT. So, the REF_CLK should be configured
- as input or output according to the actual circuit connection.
- If present, indicates that the REF_CLK will be configured as
- interface reference clock input when RMII mode enabled.
- If not present, the REF_CLK will be configured as interface
- reference clock output when RMII mode enabled.
- Only supported on TJA1100 and TJA1101.
+ description: Enable 50MHz RMII reference clock output on REF_CLK pin.
required:
- reg
@@ -61,7 +49,7 @@ examples:
tja1101_phy0: ethernet-phy@4 {
reg = <0x4>;
- nxp,rmii-refclk-in;
+ nxp,phy-output-refclk;
};
};
- |
--
2.34.1
