[PATCH v3 1/1] dt-bindings: leds: convert leds-lm3692x to yaml format

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Convert binding doc leds-lm3592x to yaml format.
Additional change:
- Add ref to common.yaml for child node.
- Add i2c node at example.

Fix below warning:
arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dtb: /soc@0/bus@30800000/i2c@30a40000/backlight@36:
	failed to match any schema with compatible: ['ti,lm36922']

Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
---
change from v2 to v3:
- add . after sentence.
- use led@[0-3]
- add allOf: disable led@3 for lm36922

Change from v1 to v2:
- fix dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/leds/ti.lm36922.example.dtb: /example-0/i2c/led-controller@36: failed to match any schema with compatible: ['ti,lm3692x']
---
 .../devicetree/bindings/leds/leds-lm3692x.txt |  65 -----------
 .../devicetree/bindings/leds/ti.lm36922.yaml  | 110 ++++++++++++++++++
 2 files changed, 110 insertions(+), 65 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/leds/leds-lm3692x.txt
 create mode 100644 Documentation/devicetree/bindings/leds/ti.lm36922.yaml

diff --git a/Documentation/devicetree/bindings/leds/leds-lm3692x.txt b/Documentation/devicetree/bindings/leds/leds-lm3692x.txt
deleted file mode 100644
index b1103d961d6ca..0000000000000
--- a/Documentation/devicetree/bindings/leds/leds-lm3692x.txt
+++ /dev/null
@@ -1,65 +0,0 @@
-* Texas Instruments - LM3692x Highly Efficient White LED Driver
-
-The LM3692x is an ultra-compact, highly efficient,
-white-LED driver designed for LCD display backlighting.
-
-The main difference between the LM36922 and LM36923 is the number of
-LED strings it supports.  The LM36922 supports two strings while the LM36923
-supports three strings.
-
-Required properties:
-	- compatible:
-		"ti,lm36922"
-		"ti,lm36923"
-	- reg :  I2C slave address
-	- #address-cells : 1
-	- #size-cells : 0
-
-Optional properties:
-	- enable-gpios : gpio pin to enable/disable the device.
-	- vled-supply : LED supply
-	- ti,ovp-microvolt: Overvoltage protection in
-	    micro-volt, can be 17000000, 21000000, 25000000 or
-	    29000000. If ti,ovp-microvolt is not specified it
-	    defaults to 29000000.
-
-Required child properties:
-	- reg : 0 - Will enable all LED sync paths
-		1 - Will enable the LED1 sync
-		2 - Will enable the LED2 sync
-		3 - Will enable the LED3 sync (LM36923 only)
-
-Optional child properties:
-	- function : see Documentation/devicetree/bindings/leds/common.txt
-	- color : see Documentation/devicetree/bindings/leds/common.txt
-	- label : see Documentation/devicetree/bindings/leds/common.txt (deprecated)
-	- linux,default-trigger :
-	   see Documentation/devicetree/bindings/leds/common.txt
-	- led-max-microamp :
-	   see Documentation/devicetree/bindings/leds/common.txt
-
-Example:
-
-#include <dt-bindings/leds/common.h>
-
-led-controller@36 {
-	compatible = "ti,lm3692x";
-	reg = <0x36>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-	vled-supply = <&vbatt>;
-	ti,ovp-microvolt = <29000000>;
-
-	led@0 {
-		reg = <0>;
-		function = LED_FUNCTION_BACKLIGHT;
-		color = <LED_COLOR_ID_WHITE>;
-		linux,default-trigger = "backlight";
-		led-max-microamp = <20000>;
-	};
-}
-
-For more product information please see the link below:
-https://www.ti.com/lit/ds/snvsa29/snvsa29.pdf
diff --git a/Documentation/devicetree/bindings/leds/ti.lm36922.yaml b/Documentation/devicetree/bindings/leds/ti.lm36922.yaml
new file mode 100644
index 0000000000000..8ffbc6b785a3e
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/ti.lm36922.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/ti.lm36922.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments - LM3692x Highly Efficient White LED Driver
+
+maintainers:
+  - Dan Murphy <dmurphy@xxxxxx>
+
+description: |
+  The LM3692x is an ultra-compact, highly efficient,
+  white-LED driver designed for LCD display backlighting.
+
+  The main difference between the LM36922 and LM36923 is the number of
+  LED strings it supports. The LM36922 supports two strings while the LM36923
+  supports three strings.
+
+  For more product information please see the link below:
+  https://www.ti.com/lit/ds/snvsa29/snvsa29.pdf
+
+properties:
+  compatible:
+    enum:
+      - ti,lm36922
+      - ti,lm36923
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  enable-gpios:
+    description: gpio pin to enable/disable the device.
+
+  vled-supply:
+    description: LED supply
+
+  ti,ovp-microvolt:
+    description: Overvoltage protection.
+    default: 29000000
+    enum: [17000000, 21000000, 25000000, 29000000]
+
+patternProperties:
+  '^led@[0-3]$':
+    type: object
+    $ref: common.yaml
+    properties:
+      reg:
+        enum: [0, 1, 2, 3]
+        description: |
+          0 - Will enable all LED sync paths
+          1 - Will enable the LED1 sync
+          2 - Will enable the LED2 sync
+          3 - Will enable the LED3 sync (LM36923 only)
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,lm36922
+    then:
+      properties:
+        led@3: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/leds/common.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@36 {
+            compatible = "ti,lm36922";
+            reg = <0x36>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+            vled-supply = <&vbatt>;
+            ti,ovp-microvolt = <29000000>;
+
+            led@0 {
+                reg = <0>;
+                function = LED_FUNCTION_BACKLIGHT;
+                color = <LED_COLOR_ID_WHITE>;
+                linux,default-trigger = "backlight";
+                led-max-microamp = <20000>;
+            };
+        };
+    };
+
-- 
2.34.1





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux