Hi,
Could anyone please help me review the lock, unlock modification part
i did in spi-nor?
Thanks,
Viet Nga
On Mon, Feb 23, 2015 at 9:30 AM, Viet Nga Dao <vndao@xxxxxxxxxx> wrote:
> Hi,
> It has been nearly 2 weeks since i submitted this patch. Could you
> please help to review?
> Thanks,
>
> On Tue, Feb 17, 2015 at 9:33 AM, Viet Nga Dao <vndao@xxxxxxxxxx> wrote:
>> Hi Brian,
>> Could you please help me to review through this 2nd version?
>>
>> On Wed, Feb 11, 2015 at 12:53 PM, Viet Nga Dao <vndao@xxxxxxxxxx> wrote:
>>> From: Viet Nga Dao <vndao@xxxxxxxxxx>
>>>
>>> Altera EPCQ Controller is a soft IP which enables access to Altera EPCQ and
>>> EPCS flash chips. This patch adds driver for these devices.
>>>
>>> Signed-off-by: VIET NGA DAO <vndao@xxxxxxxxxx>
>>>
>>> ---
>>> v2:
>>> - Change to spi_nor structure
>>> - Add lock and unlock functions for spi_nor
>>> - Simplify the altera_epcq_lock function
>>> - Replace reg by compatible in device tree
>>> ---
>>> .../devicetree/bindings/mtd/altera_epcq.txt | 45 ++
>>> drivers/mtd/spi-nor/Kconfig | 12 +
>>> drivers/mtd/spi-nor/Makefile | 1 +
>>> drivers/mtd/spi-nor/altera_epcq.c | 507 ++++++++++++++++++++
>>> drivers/mtd/spi-nor/altera_epcq.h | 116 +++++
>>> drivers/mtd/spi-nor/spi-nor.c | 86 ++++-
>>> include/linux/mtd/spi-nor.h | 3 +-
>>> 7 files changed, 764 insertions(+), 6 deletions(-)
>>> create mode 100644 Documentation/devicetree/bindings/mtd/altera_epcq.txt
>>> create mode 100644 drivers/mtd/spi-nor/altera_epcq.c
>>> create mode 100644 drivers/mtd/spi-nor/altera_epcq.h
>>>
>>> diff --git a/Documentation/devicetree/bindings/mtd/altera_epcq.txt
>>> b/Documentation/devicetree/bindings/mtd/altera_epcq.txt
>>> new file mode 100644
>>> index 0000000..b6b5e61
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/mtd/altera_epcq.txt
>>> @@ -0,0 +1,45 @@
>>> +* MTD Altera EPCQ driver
>>> +
>>> +Required properties:
>>> +- compatible: Should be "altr,epcq-1.0"
>>> +- reg: Address and length of the register set for the device. It contains
>>> + the information of registers in the same order as described by reg-names
>>> +- reg-names: Should contain the reg names
>>> + "csr_base": Should contain the register configuration base address
>>> + "data_base": Should contain the data base address
>>> +- is-epcs: boolean type.
>>> + If present, the device contains EPCS flashes.
>>> + Otherwise, it contains EPCQ flashes.
>>> +- #address-cells: Must be <1>.
>>> +- #size-cells: Must be <0>.
>>> +- flash device tree subnode, there must be a node with the following fields:
>>> + - compatible: Should contain the flash name
>>> + - #address-cells: please refer to /mtd/partition.txt
>>> + - #size-cells: please refer to /mtd/partition.txt
>>> + For partitions inside each flash, please refer to /mtd/partition.txt
>>> +
>>> +Example:
>>> +
>>> + epcq_controller_0: epcq@0x000000000 {
>>> + compatible = "altr,epcq-1.0";
>>> + reg = <0x00000001 0x00000000 0x00000020>,
>>> + <0x00000000 0x00000000 0x02000000>;
>>> + reg-names = "csr_base", "data_base";
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> + flash0: epcq256@0 {
>>> + compatible = "epcq256";
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>> + partition@0 {
>>> + /* 16 MB for raw data. */
>>> + label = "EPCQ Flash 0 raw data";
>>> + reg = <0x0 0x1000000>;
>>> + };
>>> + partition@1000000 {
>>> + /* 16 MB for jffs2 data. */
>>> + label = "EPCQ Flash 0 JFFS 2";
>>> + reg = <0x1000000 0x1000000>;
>>> + };
>>> + };
>>> + }; //end epcq@0x000000000 (epcq_controller_0)
>>> diff --git a/drivers/mtd/spi-nor/Kconfig b/drivers/mtd/spi-nor/Kconfig
>>> index 64a4f0e..83178b9 100644
>>> --- a/drivers/mtd/spi-nor/Kconfig
>>> +++ b/drivers/mtd/spi-nor/Kconfig
>>> @@ -28,4 +28,16 @@ config SPI_FSL_QUADSPI
>>> This enables support for the Quad SPI controller in master mode.
>>> We only connect the NOR to this controller now.
>>>
>>> +config SPI_ALTERA_EPCQ
>>> + tristate "Support Altera EPCQ/EPCS Flash chips"
>>> + depends on OF
>>> + help
>>> + This enables access to Altera EPCQ/EPCS flash chips, used for data
>>> + storage. See the driver source for the current list,
>>> + or to add other chips.
>>> +
>>> + If you want to compile this driver as a module ( = code which can be
>>> + inserted in and removed from the running kernel whenever you want),
>>> + say M here and read <file:Documentation/kbuild/modules.txt>.
>>> +
>>> endif # MTD_SPI_NOR
>>> diff --git a/drivers/mtd/spi-nor/Makefile b/drivers/mtd/spi-nor/Makefile
>>> index 6a7ce14..ff9437b 100644
>>> --- a/drivers/mtd/spi-nor/Makefile
>>> +++ b/drivers/mtd/spi-nor/Makefile
>>> @@ -1,2 +1,3 @@
>>> obj-$(CONFIG_MTD_SPI_NOR) += spi-nor.o
>>> obj-$(CONFIG_SPI_FSL_QUADSPI) += fsl-quadspi.o
>>> +obj-$(CONFIG_SPI_ALTERA_EPCQ) += altera_epcq.o
>>> diff --git a/drivers/mtd/spi-nor/altera_epcq.c
>>> b/drivers/mtd/spi-nor/altera_epcq.c
>>> new file mode 100644
>>> index 0000000..9db0d05
>>> --- /dev/null
>>> +++ b/drivers/mtd/spi-nor/altera_epcq.c
>>> @@ -0,0 +1,507 @@
>>> +/*
>>> + * Copyright (C) 2014 Altera Corporation. All rights reserved
>>> + *
>>> + * This program is free software; you can redistribute it and/or modify it
>>> + * under the terms and conditions of the GNU General Public License,
>>> + * version 2, as published by the Free Software Foundation.
>>> + *
>>> + * This program is distributed in the hope it will be useful, but WITHOUT
>>> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
>>> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
>>> + * more details.
>>> + *
>>> + * You should have received a copy of the GNU General Public License along with
>>> + * this program. If not, see <http://www.gnu.org/licenses/>.
>>> + */
>>> +
>>> +#include <linux/clk.h>
>>> +#include <linux/delay.h>
>>> +#include <linux/device.h>
>>> +#include <linux/err.h>
>>> +#include <linux/errno.h>
>>> +#include <linux/interrupt.h>
>>> +#include <linux/io.h>
>>> +#include <linux/ioport.h>
>>> +#include <linux/jiffies.h>
>>> +#include <linux/kernel.h>
>>> +#include <linux/log2.h>
>>> +#include <linux/module.h>
>>> +#include <linux/mod_devicetable.h>
>>> +#include <linux/mtd/mtd.h>
>>> +#include <linux/mtd/partitions.h>
>>> +#include <linux/mtd/spi-nor.h>
>>> +#include <linux/mutex.h>
>>> +#include <linux/of.h>
>>> +#include <linux/of_address.h>
>>> +#include <linux/platform_device.h>
>>> +#include <linux/sched.h>
>>> +
>>> +#include "altera_epcq.h"
>>> +
>>> +static int altera_epcq_write_reg(struct spi_nor *nor, u8 opcode, u8 *val,
>>> + int len, int wr_en)
>>> +{
>>> + return 0;
>>> +}
>>> +
>>> +static int altera_epcq_read_reg(struct spi_nor *nor, u8 opcode, u8 *val,
>>> + int len)
>>> +{
>>> + struct altera_epcq_flash *flash = nor->priv;
>>> + struct altera_epcq *dev = flash->priv;
>>> + u32 data = 0;
>>> + u8 id[5];
>>> +
>>> + switch (opcode) {
>>> + case SPINOR_OP_RDSR:
>>> + data = readl(dev->csr_base + EPCQ_SR_REG);
>>> + *val = (u8)data & EPCQ_SR_MASK;
>>> + break;
>>> + case SPINOR_OP_RDID:
>>> + /* opcode id */
>>> + if (dev->is_epcs) {
>>> + data = readl(dev->csr_base + EPCQ_SID_REG);
>>> + id[4] = EPCS_OPCODE_ID;
>>> + } else {
>>> + data = readl(dev->csr_base + EPCQ_RDID_REG);
>>> + id[4] = EPCQ_OPCODE_ID;
>>> + }
>>> + id[0] = 0xFF; /* non standard jedec id */
>>> + id[1] = 0xFF; /* non standard jedec id */
>>> + id[2] = 0xFF; /* non standard jedec id */
>>> + id[3] = (u8)data & EPCQ_ID_MASK; /* device id */
>>> + memcpy(val, &id, 5);
>>> + break;
>>> + default:
>>> + break;
>>> + }
>>> + return 0;
>>> +}
>>> +
>>> +static int altera_epcq_write_erase_check(struct spi_nor *nor,
>>> + bool write_erase)
>>> +{
>>> + struct altera_epcq_flash *flash = nor->priv;
>>> + struct altera_epcq *dev = flash->priv;
>>> + u32 val;
>>> + u32 mask;
>>> +
>>> + if (write_erase)
>>> + mask = EPCQ_ISR_ILLEGAL_WRITE_MASK;
>>> + else
>>> + mask = EPCQ_ISR_ILLEGAL_ERASE_MASK;
>>> +
>>> + val = readl(dev->csr_base + EPCQ_ISR_REG);
>>> + if (val & mask) {
>>> + dev_err(nor->dev,
>>> + "write/erase failed, sector might be protected\n");
>>> + /* clear this status for next use */
>>> + writel(val, dev->csr_base + EPCQ_ISR_REG);
>>> + return -EIO;
>>> + }
>>> + return 0;
>>> +}
>>> +
>>> +static int altera_epcq_addr_to_sector(struct mtd_info *mtd, int offset)
>>> +{
>>> + if (mtd->erasesize_shift)
>>> + return offset >> mtd->erasesize_shift;
>>> + do_div(offset, mtd->erasesize);
>>> + return offset;
>>> +}
>>> +
>>> +static int altera_epcq_erase(struct spi_nor *nor, loff_t offset)
>>> +{
>>> +
>>> + struct altera_epcq_flash *flash = nor->priv;
>>> + struct altera_epcq *dev = flash->priv;
>>> + struct mtd_info *mtd = &flash->mtd;
>>> + u32 val;
>>> + int ret;
>>> + int sector_value;
>>> +
>>> + ret = nor->wait_till_ready(nor);
>>> + if (ret)
>>> + return ret;
>>> +
>>> + sector_value = altera_epcq_addr_to_sector(mtd, offset);
>>> + /* sanity check that block_offset is a valid sector number */
>>> + if (sector_value < 0)
>>> + return -EINVAL;
>>> +
>>> + /* sector value should occupy bits 17:8 */
>>> + val = (sector_value << 8) & EPCQ_MEM_OP_SECTOR_VALUE_MASK;
>>> +
>>> + /* sector erase commands occupies lower 2 bits */
>>> + val |= EPCQ_MEM_OP_SECTOR_ERASE_CMD;
>>> +
>>> + /* write sector erase command to EPCQ_MEM_OP register */
>>> + writel(val, dev->csr_base + EPCQ_MEM_OP_REG);
>>> +
>>> + /* wait the erase command is done then check whether
>>> + * write triggered a illegal write interrupt
>>> + */
>>> + ret = nor->wait_till_ready(nor);
>>> + if (ret)
>>> + return ret;
>>> +
>>> + ret = altera_epcq_write_erase_check(nor, 0);
>>> + if (ret < 0)
>>> + return ret;
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int altera_epcq_read(struct spi_nor *nor, loff_t from, size_t len,
>>> + size_t *retlen, u_char *buf)
>>> +{
>>> + struct altera_epcq_flash *flash = nor->priv;
>>> + struct altera_epcq *dev = flash->priv;
>>> + int ret = 0;
>>> +
>>> + mutex_lock(&flash->lock);
>>> + /* wait till previous write/erase is done. */
>>> + ret = nor->wait_till_ready(nor);
>>> + if (ret)
>>> + goto err;
>>> +
>>> + memcpy_fromio(buf, dev->data_base + from, len);
>>> + *retlen = len;
>>> +
>>> +err:
>>> + mutex_unlock(&flash->lock);
>>> + return ret;
>>> +}
>>> +
>>> +static void altera_epcq_write(struct spi_nor *nor, loff_t to, size_t len,
>>> + size_t *retlen, const u_char *buf)
>>> +{
>>> + struct altera_epcq_flash *flash = nor->priv;
>>> + struct altera_epcq *dev = flash->priv;
>>> + int ret = 0;
>>> +
>>> + mutex_lock(&flash->lock);
>>> +
>>> + /* wait until finished previous write command */
>>> + ret = nor->wait_till_ready(nor);
>>> + if (ret)
>>> + goto err;
>>> +
>>> + memcpy_toio(dev->data_base + to, buf, len);
>>> + *retlen += len;
>>> +
>>> + /* wait until finished write command then
>>> + * check whether write triggered a illegal write interrupt
>>> + */
>>> + ret = nor->wait_till_ready(nor);
>>> + if (ret)
>>> + goto err;
>>> +
>>> + ret = altera_epcq_write_erase_check(nor, 1);
>>> + if (ret < 0)
>>> + goto err;
>>> +
>>> +err:
>>> + mutex_unlock(&flash->lock);
>>> +}
>>> +
>>> +static int altera_epcq_lock(struct spi_nor *nor, loff_t ofs, uint64_t len)
>>> +{
>>> + struct altera_epcq_flash *flash = nor->priv;
>>> + struct altera_epcq *dev = flash->priv;
>>> + struct mtd_info *mtd = &flash->mtd;
>>> + uint32_t offset = ofs;
>>> + int ret = 0;
>>> + u32 sector_start, sector_end;
>>> + u32 num_sectors;
>>> + u32 mem_op;
>>> + u32 sr_bp;
>>> + u32 sr_tb;
>>> +
>>> + sector_start = offset;
>>> + sector_end = altera_epcq_addr_to_sector(mtd, offset + len);
>>> + num_sectors = mtd->size;
>>> + do_div(num_sectors, mtd->erasesize);
>>> +
>>> + dev_dbg(nor->dev, "%s: sector start is %u,sector end is %u\n",
>>> + __func__, sector_start, sector_end);
>>> +
>>> + mutex_lock(&flash->lock);
>>> + /* wait until finished previous write command. */
>>> + ret = nor->wait_till_ready(nor);
>>> + if (ret)
>>> + goto err;
>>> +
>>> + if (sector_start >= num_sectors / 2) {
>>> + sr_bp = fls(num_sectors - 1 - sector_start) + 1;
>>> + sr_tb = 0;
>>> + } else if ((sector_end < num_sectors / 2) && ~dev->is_epcs) {
>>> + sr_bp = fls(sector_end) + 1;
>>> + sr_tb = 1;
>>> + } else {
>>> + sr_bp = 16;
>>> + sr_tb = 0;
>>> + }
>>> +
>>> + mem_op = (sr_tb << 12) | (sr_bp << 8);
>>> + mem_op &= EPCQ_MEM_OP_SECTOR_PROTECT_VALUE_MASK;
>>> + mem_op |= EPCQ_MEM_OP_SECTOR_PROTECT_CMD;
>>> + writel(mem_op, dev->csr_base + EPCQ_MEM_OP_REG);
>>> +
>>> +err:
>>> + mutex_unlock(&flash->lock);
>>> + return ret;
>>> +}
>>> +
>>> +static int altera_epcq_unlock(struct spi_nor *nor, loff_t ofs, uint64_t len)
>>> +{
>>> + struct altera_epcq_flash *flash = nor->priv;
>>> + struct altera_epcq *dev = flash->priv;
>>> + int ret = 0;
>>> + u32 mem_op;
>>> +
>>> + mutex_lock(&flash->lock);
>>> + /* wait until finished previous write command. */
>>> + ret = nor->wait_till_ready(nor);
>>> + if (ret)
>>> + goto err;
>>> + dev_info(nor->dev, "Unlock all protected area\n");
>>> + mem_op = 0;
>>> + mem_op &= EPCQ_MEM_OP_SECTOR_PROTECT_VALUE_MASK;
>>> + mem_op |= EPCQ_MEM_OP_SECTOR_PROTECT_CMD;
>>> + writel(mem_op, dev->csr_base + EPCQ_MEM_OP_REG);
>>> +
>>> +err:
>>> + mutex_unlock(&flash->lock);
>>> + return ret;
>>> +}
>>> +
>>> +static void altera_epcq_chip_select(struct altera_epcq *dev, u32 bank)
>>> +{
>>> + u32 val = 0;
>>> +
>>> + switch (bank) {
>>> + case 0:
>>> + val = EPCQ_CHIP_SELECT_0;
>>> + break;
>>> + case 1:
>>> + val = EPCQ_CHIP_SELECT_1;
>>> + break;
>>> + case 2:
>>> + val = EPCQ_CHIP_SELECT_2;
>>> + break;
>>> + default:
>>> + return;
>>> + }
>>> + writel(val, dev->csr_base + EPCQ_CHIP_SELECT_REG);
>>> +}
>>> +
>>> +
>>> +static int altera_epcq_probe_config_dt(struct platform_device *pdev,
>>> + struct device_node *np,
>>> + struct altera_epcq_plat_data *pdata)
>>> +{
>>> + struct device_node *pp = NULL;
>>> + struct resource *epcq_res;
>>> + int i = 0;
>>> +
>>> + pdata->is_epcs = of_property_read_bool(np, "is-epcs");
>>> +
>>> + epcq_res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
>>> + "csr_base");
>>> + pdata->csr_base = devm_ioremap_resource(&pdev->dev, epcq_res);
>>> + if (IS_ERR(pdata->csr_base)) {
>>> + dev_err(&pdev->dev, "%s: ERROR: failed to map csr base\n",
>>> + __func__);
>>> + return PTR_ERR(pdata->csr_base);
>>> + }
>>> +
>>> + epcq_res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
>>> + "data_base");
>>> + pdata->data_base = devm_ioremap_resource(&pdev->dev, epcq_res);
>>> + if (IS_ERR(pdata->data_base)) {
>>> + dev_err(&pdev->dev, "%s: ERROR: failed to map data base\n",
>>> + __func__);
>>> + return PTR_ERR(pdata->data_base);
>>> + }
>>> +
>>> + /* Fill structs for each subnode (flash device) */
>>> + for_each_available_child_of_node(np, pp) {
>>> + /* Read bank id from DT */
>>> + pdata->np[i] = pp;
>>> + i++;
>>> + }
>>> + pdata->num_flashes = i;
>>> + return 0;
>>> +}
>>> +
>>> +static int altera_epcq_setup_banks(struct platform_device *pdev,
>>> + u32 bank, struct device_node *np)
>>> +{
>>> + struct altera_epcq *dev = platform_get_drvdata(pdev);
>>> + struct mtd_part_parser_data ppdata = {};
>>> + struct altera_epcq_flash *flash;
>>> + struct spi_nor *nor;
>>> + int ret = 0;
>>> + char modalias[40];
>>> +
>>> + altera_epcq_chip_select(dev, bank);
>>> +
>>> + if (bank > dev->num_flashes - 1)
>>> + return -EINVAL;
>>> +
>>> + flash = devm_kzalloc(&pdev->dev, sizeof(*flash), GFP_KERNEL);
>>> + if (!flash)
>>> + return -ENOMEM;
>>> +
>>> + mutex_init(&flash->lock);
>>> +
>>> + dev->flash[bank] = flash;
>>> + nor = &flash->nor;
>>> + nor->mtd = &flash->mtd;
>>> + nor->dev = &pdev->dev;
>>> + nor->priv = flash;
>>> + flash->mtd.priv = nor;
>>> + flash->priv = dev;
>>> +
>>> + /* spi nor framework*/
>>> + nor->read_reg = altera_epcq_read_reg;
>>> + nor->write_reg = altera_epcq_write_reg;
>>> + nor->read = altera_epcq_read;
>>> + nor->write = altera_epcq_write;
>>> + nor->erase = altera_epcq_erase;
>>> + nor->_lock = altera_epcq_lock;
>>> + nor->_unlock = altera_epcq_unlock;
>>> +
>>> + if (of_modalias_node(np, modalias, sizeof(modalias)) < 0)
>>> + return -EINVAL;
>>> +
>>> + ret = spi_nor_scan(nor, modalias, SPI_NOR_QUAD);
>>> + if (ret)
>>> + return ret;
>>> + ppdata.of_node = np;
>>> +
>>> + return mtd_device_parse_register(&flash->mtd, NULL, &ppdata, NULL, 0);
>>> +}
>>> +
>>> +static int altera_epcq_probe(struct platform_device *pdev)
>>> +{
>>> + struct device_node *np = pdev->dev.of_node;
>>> + struct altera_epcq_plat_data *pdata = NULL;
>>> + struct altera_epcq *dev;
>>> + int ret = 0;
>>> + int i;
>>> +
>>> + if (!np) {
>>> + ret = -ENODEV;
>>> + dev_err(&pdev->dev, "no device found\n");
>>> + goto err;
>>> + }
>>> +
>>> + pdata = devm_kzalloc(&pdev->dev,
>>> + sizeof(struct altera_epcq_plat_data),
>>> + GFP_KERNEL);
>>> +
>>> + if (!pdata) {
>>> + ret = -ENOMEM;
>>> + goto err;
>>> + }
>>> +
>>> + ret = altera_epcq_probe_config_dt(pdev, np, pdata);
>>> + if (ret) {
>>> + ret = -ENODEV;
>>> + dev_err(&pdev->dev, "probe fail\n");
>>> + goto err;
>>> + }
>>> +
>>> + dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_ATOMIC);
>>> + if (!dev) {
>>> + ret = -ENOMEM;
>>> + goto err;
>>> + }
>>> + mutex_init(&dev->lock);
>>> + dev->is_epcs = pdata->is_epcs;
>>> + dev->csr_base = pdata->csr_base;
>>> + dev->data_base = pdata->data_base;
>>> +
>>> + /* check number of flashes */
>>> + dev->num_flashes = pdata->num_flashes;
>>> + if (dev->num_flashes > MAX_NUM_FLASH_CHIP) {
>>> + dev_err(&pdev->dev, "exceeding max number of flashes\n");
>>> + dev->num_flashes = MAX_NUM_FLASH_CHIP;
>>> + }
>>> +
>>> + /* check clock */
>>> + dev->clk = devm_clk_get(&pdev->dev, NULL);
>>> + if (IS_ERR(dev->clk)) {
>>> + ret = PTR_ERR(dev->clk);
>>> + goto err;
>>> + }
>>> + ret = clk_prepare_enable(dev->clk);
>>> + if (ret)
>>> + goto err;
>>> +
>>> + platform_set_drvdata(pdev, dev);
>>> +
>>> + /* loop for each flash which is connected to epcq */
>>> + for (i = 0; i < dev->num_flashes; i++) {
>>> + ret = altera_epcq_setup_banks(pdev, i, pdata->np[i]);
>>> + if (ret) {
>>> + dev_err(&pdev->dev, "bank setup failed\n");
>>> + goto err_bank_setup;
>>> + }
>>> + }
>>> +
>>> + return 0;
>>> +
>>> +err_bank_setup:
>>> + clk_disable_unprepare(dev->clk);
>>> +err:
>>> + return ret;
>>> +}
>>> +
>>> +static int altera_epcq_remove(struct platform_device *pdev)
>>> +{
>>> + struct altera_epcq *dev;
>>> + struct altera_epcq_flash *flash;
>>> + int ret, i;
>>> +
>>> + dev = platform_get_drvdata(pdev);
>>> +
>>> + /* clean up for all nor flash */
>>> + for (i = 0; i < dev->num_flashes; i++) {
>>> + flash = dev->flash[i];
>>> + if (!flash)
>>> + continue;
>>> +
>>> + /* clean up mtd stuff */
>>> + ret = mtd_device_unregister(&flash->mtd);
>>> + if (ret)
>>> + dev_err(&pdev->dev, "error removing mtd\n");
>>> + }
>>> +
>>> + clk_disable_unprepare(dev->clk);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static const struct of_device_id altera_epcq_id_table[] = {
>>> + { .compatible = "altr,epcq-1.0" },
>>> + {}
>>> +};
>>> +MODULE_DEVICE_TABLE(of, altera_epcq_id_table);
>>> +
>>> +static struct platform_driver altera_epcq_driver = {
>>> + .driver = {
>>> + .name = ALTERA_EPCQ_RESOURCE_NAME,
>>> + .bus = &platform_bus_type,
>>> + .of_match_table = altera_epcq_id_table,
>>> + },
>>> + .probe = altera_epcq_probe,
>>> + .remove = altera_epcq_remove,
>>> +};
>>> +module_platform_driver(altera_epcq_driver);
>>> +
>>> +MODULE_AUTHOR("Viet Nga Dao <vndao@xxxxxxxxxx>");
>>> +MODULE_DESCRIPTION("Altera EPCQ Driver");
>>> +MODULE_LICENSE("GPL v2");
>>> diff --git a/drivers/mtd/spi-nor/altera_epcq.h
>>> b/drivers/mtd/spi-nor/altera_epcq.h
>>> new file mode 100644
>>> index 0000000..bc29f65
>>> --- /dev/null
>>> +++ b/drivers/mtd/spi-nor/altera_epcq.h
>>> @@ -0,0 +1,116 @@
>>> +/*
>>> + * Copyright (C) 2014 Altera Corporation. All rights reserved
>>> + *
>>> + * This program is free software; you can redistribute it and/or modify it
>>> + * under the terms and conditions of the GNU General Public License,
>>> + * version 2, as published by the Free Software Foundation.
>>> + *
>>> + * This program is distributed in the hope it will be useful, but WITHOUT
>>> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
>>> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
>>> + * more details.
>>> + *
>>> + * You should have received a copy of the GNU General Public License along with
>>> + * this program. If not, see <http://www.gnu.org/licenses/>.
>>> + */
>>> +
>>> +#ifndef __ALTERA_ECPQ_H
>>> +#define __ALTERA_ECPQ_H
>>> +
>>> +#define ALTERA_EPCQ_RESOURCE_NAME "altera_epcq"
>>> +/* max possible slots for serial flash chip in the EPCQ controller */
>>> +#define MAX_NUM_FLASH_CHIP 3
>>> +#define EPCS_OPCODE_ID 1
>>> +#define EPCQ_OPCODE_ID 2
>>> +
>>> +struct altera_epcq_plat_data {
>>> + void __iomem *csr_base;
>>> + void __iomem *data_base;
>>> + bool is_epcs;
>>> + u32 num_flashes;
>>> + struct device_node *np[MAX_NUM_FLASH_CHIP];
>>> +};
>>> +
>>> +struct altera_epcq {
>>> + struct clk *clk;
>>> + bool is_epcs;
>>> + struct mutex lock; /*device lock*/
>>> + void __iomem *csr_base;
>>> + void __iomem *data_base;
>>> + u32 num_flashes;
>>> + struct altera_epcq_flash *flash[MAX_NUM_FLASH_CHIP];
>>> +};
>>> +
>>> +struct altera_epcq_flash {
>>> + struct mutex lock; /*flash lock*/
>>> + struct mtd_info mtd;
>>> + struct spi_nor nor;
>>> + void *priv;
>>> +};
>>> +
>>> +/* Define max times to check status register before we give up. */
>>> +#define EPCQ_MAX_TIME_OUT (40 * HZ)
>>> +
>>> +/* defines for status register */
>>> +#define EPCQ_SR_REG 0x0
>>> +#define EPCQ_SR_WIP_MASK 0x00000001
>>> +#define EPCQ_SR_WIP 0x1
>>> +#define EPCQ_SR_WEL 0x2
>>> +#define EPCQ_SR_BP0 0x4
>>> +#define EPCQ_SR_BP1 0x8
>>> +#define EPCQ_SR_BP2 0x10
>>> +#define EPCQ_SR_BP3 0x40
>>> +#define EPCQ_SR_TB 0x20
>>> +#define EPCQ_SR_MASK 0x0000000F
>>> +
>>> +/* defines for device id register */
>>> +#define EPCQ_SID_REG 0x4
>>> +#define EPCQ_RDID_REG 0x8
>>> +#define EPCQ_ID_MASK 0x000000FF
>>> +
>>> +/*
>>> + * EPCQ_MEM_OP register offset
>>> + *
>>> + * The EPCQ_MEM_OP register is used to do memory protect and erase operations
>>> + *
>>> + */
>>> +#define EPCQ_MEM_OP_REG 0xC
>>> +
>>> +#define EPCQ_MEM_OP_CMD_MASK 0x00000003
>>> +#define EPCQ_MEM_OP_BULK_ERASE_CMD 0x00000001
>>> +#define EPCQ_MEM_OP_SECTOR_ERASE_CMD 0x00000002
>>> +#define EPCQ_MEM_OP_SECTOR_PROTECT_CMD 0x00000003
>>> +#define EPCQ_MEM_OP_SECTOR_VALUE_MASK 0x0003FF00
>>> +#define EPCQ_MEM_OP_SECTOR_PROTECT_VALUE_MASK 0x00001F00
>>> +#define EPCQ_MEM_OP_SECTOR_PROTECT_SHIFT 8
>>> +/*
>>> + * EPCQ_ISR register offset
>>> + *
>>> + * The EPCQ_ISR register is used to determine whether an invalid write or erase
>>> + * operation trigerred an interrupt
>>> + *
>>> + */
>>> +#define EPCQ_ISR_REG 0x10
>>> +
>>> +#define EPCQ_ISR_ILLEGAL_ERASE_MASK 0x00000001
>>> +#define EPCQ_ISR_ILLEGAL_WRITE_MASK 0x00000002
>>> +
>>> +/*
>>> + * EPCQ_IMR register offset
>>> + *
>>> + * The EPCQ_IMR register is used to mask the invalid erase or the invalid write
>>> + * interrupts.
>>> + *
>>> + */
>>> +#define EPCQ_IMR_REG 0x14
>>> +#define EPCQ_IMR_ILLEGAL_ERASE_MASK 0x00000001
>>> +
>>> +#define EPCQ_IMR_ILLEGAL_WRITE_MASK 0x00000002
>>> +
>>> +#define EPCQ_CHIP_SELECT_REG 0x18
>>> +#define EPCQ_CHIP_SELECT_MASK 0x00000007
>>> +#define EPCQ_CHIP_SELECT_0 0x00000001
>>> +#define EPCQ_CHIP_SELECT_1 0x00000002
>>> +#define EPCQ_CHIP_SELECT_2 0x00000004
>>> +
>>> +#endif /* __ALTERA_ECPQ_H */
>>> diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
>>> index 3b8a411..bfbb274 100644
>>> --- a/drivers/mtd/spi-nor/spi-nor.c
>>> +++ b/drivers/mtd/spi-nor/spi-nor.c
>>> @@ -330,7 +330,7 @@ erase_err:
>>> return ret;
>>> }
>>>
>>> -static int spi_nor_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
>>> +static int stmicro_spi_nor_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
>>> {
>>> struct spi_nor *nor = mtd_to_spi_nor(mtd);
>>> uint32_t offset = ofs;
>>> @@ -377,7 +377,8 @@ err:
>>> return ret;
>>> }
>>>
>>> -static int spi_nor_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
>>> +static int stmicro_spi_nor_unlock(struct mtd_info *mtd, loff_t ofs,
>>> + uint64_t len)
>>> {
>>> struct spi_nor *nor = mtd_to_spi_nor(mtd);
>>> uint32_t offset = ofs;
>>> @@ -424,6 +425,48 @@ err:
>>> return ret;
>>> }
>>>
>>> +static int spi_nor_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
>>> +{
>>> + struct spi_nor *nor = mtd_to_spi_nor(mtd);
>>> + int ret = 0;
>>> +
>>> + ret = spi_nor_lock_and_prep(nor, SPI_NOR_OPS_LOCK);
>>> + if (ret)
>>> + return ret;
>>> +
>>> + /* Wait until finished previous command */
>>> + ret = wait_till_ready(nor);
>>> + if (ret)
>>> + goto err;
>>> +
>>> + ret = nor->_lock(nor, ofs, len);
>>> +
>>> +err:
>>> + spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_LOCK);
>>> + return ret;
>>> +}
>>> +
>>> +static int spi_nor_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
>>> +{
>>> + struct spi_nor *nor = mtd_to_spi_nor(mtd);
>>> + int ret = 0;
>>> +
>>> + ret = spi_nor_lock_and_prep(nor, SPI_NOR_OPS_LOCK);
>>> + if (ret)
>>> + return ret;
>>> +
>>> + /* Wait until finished previous command */
>>> + ret = wait_till_ready(nor);
>>> + if (ret)
>>> + goto err;
>>> +
>>> + ret = nor->_unlock(nor, ofs, len);
>>> +
>>> +err:
>>> + spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_LOCK);
>>> + return ret;
>>> +}
>>> +
>>> struct flash_info {
>>> /* JEDEC id zero means "no ID" (most older chips); otherwise it has
>>> * a high byte of zero plus three data bytes: the manufacturer id,
>>> @@ -442,6 +485,7 @@ struct flash_info {
>>> u16 addr_width;
>>>
>>> u16 flags;
>>> + u8 altera_flash_opcode_id;
>>> #define SECT_4K 0x01 /* SPINOR_OP_BE_4K works uniformly */
>>> #define SPI_NOR_NO_ERASE 0x02 /* No erase command needed */
>>> #define SST_WRITE 0x04 /* use SST byte programming */
>>> @@ -471,6 +515,16 @@ struct flash_info {
>>> .flags = (_flags), \
>>> })
>>>
>>> +
>>> +#define EPCQ_INFO(_opcode_id, _ext_id, _sector_size, _n_sectors, _page_size) \
>>> + ((kernel_ulong_t)&(struct flash_info) { \
>>> + .altera_flash_opcode_id = (_opcode_id), \
>>> + .ext_id = (_ext_id), \
>>> + .sector_size = (_sector_size), \
>>> + .n_sectors = (_n_sectors), \
>>> + .page_size = (_page_size), \
>>> + })
>>> +
>>> /* NOTE: double check command sets and memory organization when you add
>>> * more nor chips. This current list focusses on newer chips, which
>>> * have been converging on command sets which including JEDEC ID.
>>> @@ -637,6 +691,17 @@ static const struct spi_device_id spi_nor_ids[] = {
>>> { "cat25c09", CAT25_INFO( 128, 8, 32, 2, SPI_NOR_NO_ERASE |
>>> SPI_NOR_NO_FR) },
>>> { "cat25c17", CAT25_INFO( 256, 8, 32, 2, SPI_NOR_NO_ERASE |
>>> SPI_NOR_NO_FR) },
>>> { "cat25128", CAT25_INFO(2048, 8, 64, 2, SPI_NOR_NO_ERASE |
>>> SPI_NOR_NO_FR) },
>>> +
>>> + /* Altera EPCQ/EPCS Flashes */
>>> + { "epcq16" , EPCQ_INFO(2, 0x15, 0x10000, 32, 0x100) },
>>> + { "epcq32" , EPCQ_INFO(2, 0x16, 0x10000, 64, 0x100) },
>>> + { "epcq64" , EPCQ_INFO(2, 0x17, 0x10000, 128, 0x100) },
>>> + { "epcq128" , EPCQ_INFO(2, 0x18, 0x10000, 256, 0x100) },
>>> + { "epcq256" , EPCQ_INFO(2, 0x19, 0x10000, 512, 0x100) },
>>> + { "epcq512" , EPCQ_INFO(2, 0x20, 0x10000, 1024, 0x100) },
>>> + { "epcs16" , EPCQ_INFO(1, 0x14, 0x10000, 32, 0x100) },
>>> + { "epcs64" , EPCQ_INFO(1, 0x16, 0x10000, 128, 0x100) },
>>> + { "epcs128" , EPCQ_INFO(1, 0x18, 0x40000, 256, 0x100) },
>>> { },
>>> };
>>>
>>> @@ -666,6 +731,14 @@ static const struct spi_device_id
>>> *spi_nor_read_id(struct spi_nor *nor)
>>> if (info->jedec_id == jedec) {
>>> if (info->ext_id == 0 || info->ext_id == ext_jedec)
>>> return &spi_nor_ids[tmp];
>>> +
>>> + /* altera epcq which is non jedec device
>>> + * use id[4] as opcode id to differentiate
>>> + * epcs and epcq devices
>>> + */
>>> + } else if (info->altera_flash_opcode_id == id[4] &&
>>> + info->ext_id == id[3]) {
>>> + return &spi_nor_ids[tmp];
>>> }
>>> }
>>> dev_err(nor->dev, "unrecognized JEDEC id %06x\n", jedec);
>>> @@ -904,7 +977,8 @@ static void spi_nor_shutdown(struct spi_nor *nor)
>>> static int spi_nor_check(struct spi_nor *nor)
>>> {
>>> if (!nor->dev || !nor->read || !nor->write ||
>>> - !nor->read_reg || !nor->write_reg || !nor->erase) {
>>> + !nor->read_reg || !nor->write_reg || !nor->erase ||
>>> + !nor->_lock || !nor->_unlock) {
>>> pr_err("spi-nor: please fill all the necessary fields!\n");
>>> return -EINVAL;
>>> }
>>> @@ -939,9 +1013,8 @@ int spi_nor_scan(struct spi_nor *nor, const char
>>> *name, enum read_mode mode)
>>>
>>> info = (void *)id->driver_data;
>>>
>>> - if (info->jedec_id) {
>>> + if (info->jedec_id || info->altera_flash_opcode_id) {
>>> const struct spi_device_id *jid;
>>> -
>>> jid = nor->read_id(nor);
>>> if (IS_ERR(jid)) {
>>> return PTR_ERR(jid);
>>> @@ -987,6 +1060,9 @@ int spi_nor_scan(struct spi_nor *nor, const char
>>> *name, enum read_mode mode)
>>>
>>> /* nor protection support for STmicro chips */
>>> if (JEDEC_MFR(info->jedec_id) == CFI_MFR_ST) {
>>> + mtd->_lock = stmicro_spi_nor_lock;
>>> + mtd->_unlock = stmicro_spi_nor_unlock;
>>> + } else {
>>> mtd->_lock = spi_nor_lock;
>>> mtd->_unlock = spi_nor_unlock;
>>> }
>>> diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
>>> index 29d1a0d..042bed2 100644
>>> --- a/include/linux/mtd/spi-nor.h
>>> +++ b/include/linux/mtd/spi-nor.h
>>> @@ -183,7 +183,8 @@ struct spi_nor {
>>> void (*write)(struct spi_nor *nor, loff_t to,
>>> size_t len, size_t *retlen, const u_char *write_buf);
>>> int (*erase)(struct spi_nor *nor, loff_t offs);
>>> -
>>> + int (*_lock)(struct spi_nor *nor, loff_t offs, uint64_t len);
>>> + int (*_unlock)(struct spi_nor *nor, loff_t offs, uint64_t len);
>>> void *priv;
>>> };
>>>
>>> --
>>> 1.7.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
