The way the APB nodes are currently described causes excessive output
from `make dtbs_check` as demonstrated below (approximately 30KB per
devicetree). This stems from nesting the apb nodes under the top-level
ahb nodes, while the simple-bus binding requires that the ahb subnode
names contain a unit address[1].
In the process of cleaning this up, it became apparent that both the
APB descriptions in the devicetree and datasheet were pretty murky.
I followed up with Troy Lee and Ryan Chen, and received the following
from Ryan:
> Sorry, I double confirm with designer.
> AST2400/AST2500/AST2600: 1e6exxxx, 1e6fxxxx, 1e78xxxx, 1e79xxxx : APB,
> others is AHB
As a result, update the Aspeed DTSIs to describe one APB node per
mapping listed in Ryan's response, and lift all controllers that are not
in the described ranges out of the APB nodes to the AHB node.
This change may impact OpenBMC userspace applications that use
devicetree paths in sysfs to identify hardware components. However,
these uses of sysfs were previously identified as incorrect[2][3][4].
Its expected that any affected applications will reworked so they are
not sensitive to node renames.
The change squashes schema warnings such as:
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-galaxy100.dtb: ahb: apb: {'compatible': ['simple-bus'], '#address-cells': [[1]], '#size-cells': [[1]], 'ranges': True, 'syscon@1e6e2000': {'compatible': ['aspeed,ast2400-scu', 'syscon', 'simple-mfd'], 'reg': [[510533632, 424]], '#address-cells': [[1]], '#size-cells': [[1]], 'ranges': [[0, 510533632, 4096]], '#clock-cells': [[1]], '#reset-cells': [[1]], 'phandle': [[2]], 'p2a-control@2c': {'reg': [[44, 4]], 'compatible': ['aspeed,ast2400-p2a-ctrl'], 'status': ['disabled']}, 'silicon-id@7c': {'compatible': ['aspeed,ast2400-silicon-id', 'aspeed,silicon-id'], 'reg': [[124, 4]]}, 'pinctrl@80': {'reg': [[128, 24], [160, 16]], 'compatible': ['aspeed,ast2400-pinctrl'], 'phandle': [[7]], 'acpi_default': {'function': ['ACPI'], 'groups': ['ACPI']}, 'adc0_default': {'function': ['ADC0'], 'groups': ['ADC0']}, 'adc1_default': {'function': ['ADC1'], 'groups': ['ADC1']}, 'adc10_default': {'function': ['ADC10'], 'groups': ['ADC10']}, 'adc11_default': {
'function': ['ADC11'], 'groups': ['ADC11']}, 'adc12_default': {'function': ['ADC12'], 'groups': ['ADC12']}, 'adc13_default': {'function': ['ADC13'], 'groups': ['ADC13']}, 'adc14_default': {'function': ['ADC14'], 'groups': ['ADC14']}, 'adc15_default': {'function': ['ADC15'], 'groups': ['ADC15']}, 'adc2_default': {'function': ['ADC2'], 'groups': ['ADC2']}, 'adc3_default': {'function': ['ADC3'], 'groups': ['ADC3']}, 'adc4_default': {'function': ['ADC4'], 'groups': ['ADC4']}, 'adc5_default': {'function': ['ADC5'], 'groups': ['ADC5']}, 'adc6_default': {'function': ['ADC6'], 'groups': ['ADC6']}, 'adc7_default': {'function': ['ADC7'], 'groups': ['ADC7']}, 'adc8_default': {'function': ['ADC8'], 'groups': ['ADC8']}, 'adc9_default': {'function': ['ADC9'], 'groups': ['ADC9']}, 'bmcint_default': {'function': ['BMCINT'], 'groups': ['BMCINT']}, 'ddcclk_default': {'function': ['DDCCLK'], 'groups': ['DDCCLK']}, 'ddcdat_default': {'function': ['DDCDAT'], 'groups': ['DDCDAT']}, 'extrst_default': {'fu
nction': ['EXTRST'], 'groups': ['EXTRST']}, 'flack_default': {'function': ['FLACK'], 'groups': ['FLACK']}, 'flbusy_default': {'function': ['FLBUSY'], 'groups': ['FLBUSY']}, 'flwp_default': {'function': ['FLWP'], 'groups': ['FLWP']}, 'gpid_default': {'function': ['GPID'], 'groups': ['GPID']}, 'gpid0_default': {'function': ['GPID0'], 'groups': ['GPID0']}, 'gpid2_default': {'function': ['GPID2'], 'groups': ['GPID2']}, 'gpid4_default': {'function': ['GPID4'], 'groups': ['GPID4']}, 'gpid6_default': {'function': ['GPID6'], 'groups': ['GPID6']}, 'gpie0_default': {'function': ['GPIE0'], 'groups': ['GPIE0']}, 'gpie2_default': {'function': ['GPIE2'], 'groups': ['GPIE2']}, 'gpie4_default': {'function': ['GPIE4'], 'groups': ['GPIE4']}, 'gpie6_default': {'function': ['GPIE6'], 'groups': ['GPIE6']}, 'i2c10_default': {'function': ['I2C10'], 'groups': ['I2C10'], 'phandle': [[24]]}, 'i2c11_default': {'function': ['I2C11'], 'groups': ['I2C11'], 'phandle': [[25]]}, 'i2c12_default': {'function': ['I2C1
2'], 'groups': ['I2C12'], 'phandle': [[26]]}, 'i2c13_default': {'function': ['I2C13'], 'groups': ['I2C13'], 'phandle': [[27]]}, 'i2c14_default': {'function': ['I2C14'], 'groups': ['I2C14'], 'phandle': [[28]]}, 'i2c3_default': {'function': ['I2C3'], 'groups': ['I2C3'], 'phandle': [[17]]}, 'i2c4_default': {'function': ['I2C4'], 'groups': ['I2C4'], 'phandle': [[18]]}, 'i2c5_default': {'function': ['I2C5'], 'groups': ['I2C5'], 'phandle': [[19]]}, 'i2c6_default': {'function': ['I2C6'], 'groups': ['I2C6'], 'phandle': [[20]]}, 'i2c7_default': {'function': ['I2C7'], 'groups': ['I2C7'], 'phandle': [[21]]}, 'i2c8_default': {'function': ['I2C8'], 'groups': ['I2C8'], 'phandle': [[22]]}, 'i2c9_default': {'function': ['I2C9'], 'groups': ['I2C9'], 'phandle': [[23]]}, 'lpcpd_default': {'function': ['LPCPD'], 'groups': ['LPCPD']}, 'lpcpme_default': {'function': ['LPCPME'], 'groups': ['LPCPME']}, 'lpcrst_default': {'function': ['LPCRST'], 'groups': ['LPCRST']}, 'lpcsmi_default': {'function': ['LPCSMI
'], 'groups': ['LPCSMI']}, 'mac1link_default': {'function': ['MAC1LINK'], 'groups': ['MAC1LINK']}, 'mac2link_default': {'function': ['MAC2LINK'], 'groups': ['MAC2LINK']}, 'mdio1_default': {'function': ['MDIO1'], 'groups': ['MDIO1']}, 'mdio2_default': {'function': ['MDIO2'], 'groups': ['MDIO2'], 'phandle': [[4]]}, 'ncts1_default': {'function': ['NCTS1'], 'groups': ['NCTS1']}, 'ncts2_default': {'function': ['NCTS2'], 'groups': ['NCTS2']}, 'ncts3_default': {'function': ['NCTS3'], 'groups': ['NCTS3']}, 'ncts4_default': {'function': ['NCTS4'], 'groups': ['NCTS4']}, 'ndcd1_default': {'function': ['NDCD1'], 'groups': ['NDCD1']}, 'ndcd2_default': {'function': ['NDCD2'], 'groups': ['NDCD2']}, 'ndcd3_default': {'function': ['NDCD3'], 'groups': ['NDCD3']}, 'ndcd4_default': {'function': ['NDCD4'], 'groups': ['NDCD4']}, 'ndsr1_default': {'function': ['NDSR1'], 'groups': ['NDSR1']}, 'ndsr2_default': {'function': ['NDSR2'], 'groups': ['NDSR2']}, 'ndsr3_default': {'function': ['NDSR3'], 'groups': [
'NDSR3']}, 'ndsr4_default': {'function': ['NDSR4'], 'groups': ['NDSR4']}, 'ndtr1_default': {'function': ['NDTR1'], 'groups': ['NDTR1']}, 'ndtr2_default': {'function': ['NDTR2'], 'groups': ['NDTR2']}, 'ndtr3_default': {'function': ['NDTR3'], 'groups': ['NDTR3']}, 'ndtr4_default': {'function': ['NDTR4'], 'groups': ['NDTR4']}, 'ndts4_default': {'function': ['NDTS4'], 'groups': ['NDTS4'], 'phandle': [[15]]}, 'nri1_default': {'function': ['NRI1'], 'groups': ['NRI1']}, 'nri2_default': {'function': ['NRI2'], 'groups': ['NRI2']}, 'nri3_default': {'function': ['NRI3'], 'groups': ['NRI3']}, 'nri4_default': {'function': ['NRI4'], 'groups': ['NRI4']}, 'nrts1_default': {'function': ['NRTS1'], 'groups': ['NRTS1']}, 'nrts2_default': {'function': ['NRTS2'], 'groups': ['NRTS2']}, 'nrts3_default': {'function': ['NRTS3'], 'groups': ['NRTS3']}, 'oscclk_default': {'function': ['OSCCLK'], 'groups': ['OSCCLK']}, 'pwm0_default': {'function': ['PWM0'], 'groups': ['PWM0']}, 'pwm1_default': {'function': ['PWM
1'], 'groups': ['PWM1']}, 'pwm2_default': {'function': ['PWM2'], 'groups': ['PWM2']}, 'pwm3_default': {'function': ['PWM3'], 'groups': ['PWM3']}, 'pwm4_default': {'function': ['PWM4'], 'groups': ['PWM4']}, 'pwm5_default': {'function': ['PWM5'], 'groups': ['PWM5']}, 'pwm6_default': {'function': ['PWM6'], 'groups': ['PWM6']}, 'pwm7_default': {'function': ['PWM7'], 'groups': ['PWM7']}, 'rgmii1_default': {'function': ['RGMII1'], 'groups': ['RGMII1']}, 'rgmii2_default': {'function': ['RGMII2'], 'groups': ['RGMII2'], 'phandle': [[3]]}, 'rmii1_default': {'function': ['RMII1'], 'groups': ['RMII1']}, 'rmii2_default': {'function': ['RMII2'], 'groups': ['RMII2']}, 'rom16_default': {'function': ['ROM16'], 'groups': ['ROM16']}, 'rom8_default': {'function': ['ROM8'], 'groups': ['ROM8']}, 'romcs1_default': {'function': ['ROMCS1'], 'groups': ['ROMCS1']}, 'romcs2_default': {'function': ['ROMCS2'], 'groups': ['ROMCS2']}, 'romcs3_default': {'function': ['ROMCS3'], 'groups': ['ROMCS3']}, 'romcs4_defaul
t': {'function': ['ROMCS4'], 'groups': ['ROMCS4']}, 'rxd1_default': {'function': ['RXD1'], 'groups': ['RXD1'], 'phandle': [[10]]}, 'rxd2_default': {'function': ['RXD2'], 'groups': ['RXD2']}, 'rxd3_default': {'function': ['RXD3'], 'groups': ['RXD3'], 'phandle': [[12]]}, 'rxd4_default': {'function': ['RXD4'], 'groups': ['RXD4'], 'phandle': [[14]]}, 'salt1_default': {'function': ['SALT1'], 'groups': ['SALT1']}, 'salt2_default': {'function': ['SALT2'], 'groups': ['SALT2']}, 'salt3_default': {'function': ['SALT3'], 'groups': ['SALT3']}, 'salt4_default': {'function': ['SALT4'], 'groups': ['SALT4']}, 'sd1_default': {'function': ['SD1'], 'groups': ['SD1']}, 'sd2_default': {'function': ['SD2'], 'groups': ['SD2']}, 'sgpmck_default': {'function': ['SGPMCK'], 'groups': ['SGPMCK']}, 'sgpmi_default': {'function': ['SGPMI'], 'groups': ['SGPMI']}, 'sgpmld_default': {'function': ['SGPMLD'], 'groups': ['SGPMLD']}, 'sgpmo_default': {'function': ['SGPMO'], 'groups': ['SGPMO']}, 'sgpsck_default': {'func
tion': ['SGPSCK'], 'groups': ['SGPSCK']}, 'sgpsi0_default': {'function': ['SGPSI0'], 'groups': ['SGPSI0']}, 'sgpsi1_default': {'function': ['SGPSI1'], 'groups': ['SGPSI1']}, 'sgpsld_default': {'function': ['SGPSLD'], 'groups': ['SGPSLD']}, 'sioonctrl_default': {'function': ['SIOONCTRL'], 'groups': ['SIOONCTRL']}, 'siopbi_default': {'function': ['SIOPBI'], 'groups': ['SIOPBI']}, 'siopbo_default': {'function': ['SIOPBO'], 'groups': ['SIOPBO']}, 'siopwreq_default': {'function': ['SIOPWREQ'], 'groups': ['SIOPWREQ']}, 'siopwrgd_default': {'function': ['SIOPWRGD'], 'groups': ['SIOPWRGD']}, 'sios3_default': {'function': ['SIOS3'], 'groups': ['SIOS3']}, 'sios5_default': {'function': ['SIOS5'], 'groups': ['SIOS5']}, 'siosci_default': {'function': ['SIOSCI'], 'groups': ['SIOSCI']}, 'spi1_default': {'function': ['SPI1'], 'groups': ['SPI1']}, 'spi1debug_default': {'function': ['SPI1DEBUG'], 'groups': ['SPI1DEBUG']}, 'spi1passthru_default': {'function': ['SPI1PASSTHRU'], 'groups': ['SPI1PASSTHRU
']}, 'spics1_default': {'function': ['SPICS1'], 'groups': ['SPICS1']}, 'timer3_default': {'function': ['TIMER3'], 'groups': ['TIMER3']}, 'timer4_default': {'function': ['TIMER4'], 'groups': ['TIMER4']}, 'timer5_default': {'function': ['TIMER5'], 'groups': ['TIMER5']}, 'timer6_default': {'function': ['TIMER6'], 'groups': ['TIMER6']}, 'timer7_default': {'function': ['TIMER7'], 'groups': ['TIMER7']}, 'timer8_default': {'function': ['TIMER8'], 'groups': ['TIMER8']}, 'txd1_default': {'function': ['TXD1'], 'groups': ['TXD1'], 'phandle': [[9]]}, 'txd2_default': {'function': ['TXD2'], 'groups': ['TXD2']}, 'txd3_default': {'function': ['TXD3'], 'groups': ['TXD3'], 'phandle': [[11]]}, 'txd4_default': {'function': ['TXD4'], 'groups': ['TXD4'], 'phandle': [[13]]}, 'uart6_default': {'function': ['UART6'], 'groups': ['UART6']}, 'usbcki_default': {'function': ['USBCKI'], 'groups': ['USBCKI']}, 'usb2h_default': {'function': ['USB2H1'], 'groups': ['USB2H1'], 'phandle': [[5]]}, 'usb2d_default': {'fun
ction': ['USB2D1'], 'groups': ['USB2D1'], 'phandle': [[6]]}, 'vgabios_rom_default': {'function': ['VGABIOS_ROM'], 'groups': ['VGABIOS_ROM']}, 'vgahs_default': {'function': ['VGAHS'], 'groups': ['VGAHS']}, 'vgavs_default': {'function': ['VGAVS'], 'groups': ['VGAVS']}, 'vpi18_default': {'function': ['VPI18'], 'groups': ['VPI18']}, 'vpi24_default': {'function': ['VPI24'], 'groups': ['VPI24']}, 'vpi30_default': {'function': ['VPI30'], 'groups': ['VPI30']}, 'vpo12_default': {'function': ['VPO12'], 'groups': ['VPO12']}, 'vpo24_default': {'function': ['VPO24'], 'groups': ['VPO24']}, 'wdtrst1_default': {'function': ['WDTRST1'], 'groups': ['WDTRST1']}, 'wdtrst2_default': {'function': ['WDTRST2'], 'groups': ['WDTRST2']}}}, 'hwrng@1e6e2078': {'compatible': ['timeriomem_rng'], 'reg': [[510533752, 4]], 'period': [[1]], 'quality': [[100]]}, 'adc@1e6e9000': {'compatible': ['aspeed,ast2400-adc'], 'reg': [[510562304, 176]], 'clocks': [[2, 26]], 'resets': [[2, 2]], '#io-channel-cells': [[1]], 'status
': ['okay'], 'phandle': [[29]]}, 'sram@1e720000': {'compatible': ['mmio-sram'], 'reg': [[510787584, 32768]]}, 'video@1e700000': {'compatible': ['aspeed,ast2400-video-engine'], 'reg': [[510656512, 4096]], 'clocks': [[2, 3], [2, 0]], 'clock-names': ['vclk', 'eclk'], 'interrupts': [[7]], 'status': ['disabled']}, 'sd-controller@1e740000': {'compatible': ['aspeed,ast2400-sd-controller'], 'reg': [[510918656, 256]], '#address-cells': [[1]], '#size-cells': [[1]], 'ranges': [[0, 510918656, 65536]], 'clocks': [[2, 22]], 'status': ['disabled'], 'sdhci@100': {'compatible': ['aspeed,ast2400-sdhci'], 'reg': [[256, 256]], 'interrupts': [[26]], 'sdhci,auto-cmd12': True, 'clocks': [[2, 28]], 'status': ['disabled']}, 'sdhci@200': {'compatible': ['aspeed,ast2400-sdhci'], 'reg': [[512, 256]], 'interrupts': [[26]], 'sdhci,auto-cmd12': True, 'clocks': [[2, 28]], 'status': ['disabled']}}, 'gpio@1e780000': {'#gpio-cells': [[2]], 'gpio-controller': True, 'compatible': ['aspeed,ast2400-gpio'], 'reg': [[51118
0800, 4096]], 'interrupts': [[20]], 'gpio-ranges': [[7, 0, 0, 220]], 'clocks': [[2, 26]], 'interrupt-controller': True, '#interrupt-cells': [[2]]}, 'timer@1e782000': {'compatible': ['aspeed,ast2400-timer'], 'reg': [[511188992, 144]], 'interrupts': [[16], [17], [18], [35], [36], [37], [38], [39]], 'clocks': [[2, 26]], 'clock-names': ['PCLK']}, 'rtc@1e781000': {'compatible': ['aspeed,ast2400-rtc'], 'reg': [[511184896, 24]], 'status': ['disabled']}, 'serial@1e783000': {'compatible': ['ns16550a'], 'reg': [[511193088, 32]], 'reg-shift': [[2]], 'interrupts': [[9]], 'clocks': [[2, 13]], 'resets': [[8, 4]], 'no-loopback-test': True, 'status': ['okay'], 'pinctrl-names': ['default'], 'pinctrl-0': [[9, 10]]}, 'serial@1e784000': {'compatible': ['ns16550a'], 'reg': [[511197184, 32]], 'reg-shift': [[2]], 'interrupts': [[10]], 'clocks': [[2, 15]], 'no-loopback-test': True, 'status': ['okay']}, 'watchdog@1e785000': {'compatible': ['aspeed,ast2400-wdt'], 'reg': [[511201280, 28]], 'clocks': [[2, 26]]
, 'status': ['okay'], 'aspeed,reset-type': ['system']}, 'watchdog@1e785020': {'compatible': ['aspeed,ast2400-wdt'], 'reg': [[511201312, 28]], 'clocks': [[2, 26]], 'status': ['okay'], 'aspeed,reset-type': ['system']}, 'pwm-tacho-controller@1e786000': {'compatible': ['aspeed,ast2400-pwm-tacho'], '#address-cells': [[1]], '#size-cells': [[0]], 'reg': [[511205376, 4096]], 'clocks': [[2, 35]], 'resets': [[2, 5]], 'status': ['disabled']}, 'serial@1e787000': {'compatible': ['aspeed,ast2400-vuart'], 'reg': [[511209472, 64]], 'reg-shift': [[2]], 'interrupts': [[8]], 'clocks': [[2, 26]], 'no-loopback-test': True, 'status': ['disabled']}, 'lpc@1e789000': {'compatible': ['aspeed,ast2400-lpc-v2', 'simple-mfd', 'syscon'], 'reg': [[511217664, 4096]], 'reg-io-width': [[4]], '#address-cells': [[1]], '#size-cells': [[1]], 'ranges': [[0, 511217664, 4096]], 'lpc-ctrl@80': {'compatible': ['aspeed,ast2400-lpc-ctrl'], 'reg': [[128, 16]], 'clocks': [[2, 8]], 'status': ['disabled']}, 'lpc-snoop@90': {'compat
ible': ['aspeed,ast2400-lpc-snoop'], 'reg': [[144, 8]], 'interrupts': [[8]], 'clocks': [[2, 8]], 'status': ['disabled']}, 'lhc@a0': {'compatible': ['aspeed,ast2400-lhc'], 'reg': [[160, 36], [200, 8]]}, 'reset-controller@98': {'compatible': ['aspeed,ast2400-lpc-reset'], 'reg': [[152, 4]], '#reset-cells': [[1]], 'phandle': [[8]]}, 'ibt@140': {'compatible': ['aspeed,ast2400-ibt-bmc'], 'reg': [[320, 24]], 'interrupts': [[8]], 'clocks': [[2, 8]], 'status': ['disabled']}, 'uart-routing@9c': {'compatible': ['aspeed,ast2400-uart-routing'], 'reg': [[156, 4]], 'status': ['disabled']}}, 'peci-controller@1e78b000': {'compatible': ['aspeed,ast2400-peci'], 'reg': [[511225856, 96]], 'interrupts': [[15]], 'clocks': [[2, 6]], 'resets': [[2, 6]], 'cmd-timeout-ms': [[1000]], 'clock-frequency': [[1000000]], 'status': ['disabled']}, 'serial@1e78d000': {'compatible': ['ns16550a'], 'reg': [[511234048, 32]], 'reg-shift': [[2]], 'interrupts': [[32]], 'clocks': [[2, 14]], 'resets': [[8, 5]], 'no-loopback-tes
t': True, 'status': ['disabled']}, 'serial@1e78e000': {'compatible': ['ns16550a'], 'reg': [[511238144, 32]], 'reg-shift': [[2]], 'interrupts': [[33]], 'clocks': [[2, 20]], 'resets': [[8, 6]], 'no-loopback-test': True, 'status': ['okay'], 'pinctrl-names': ['default'], 'pinctrl-0': [[11, 12]]}, 'serial@1e78f000': {'compatible': ['ns16550a'], 'reg': [[511242240, 32]], 'reg-shift': [[2]], 'interrupts': [[34]], 'clocks': [[2, 21]], 'resets': [[8, 7]], 'no-loopback-test': True, 'status': ['okay'], 'pinctrl-names': ['default'], 'pinctrl-0': [[13, 14, 15]]}, 'bus@1e78a000': {'compatible': ['simple-bus'], '#address-cells': [[1]], '#size-cells': [[1]], 'ranges': [[0, 511221760, 4096]], 'interrupt-controller@0': {'#interrupt-cells': [[1]], 'compatible': ['aspeed,ast2400-i2c-ic'], 'reg': [[0, 64]], 'interrupts': [[12]], 'interrupt-controller': True, 'phandle': [[16]]}, 'i2c-bus@40': {'#address-cells': [[1]], '#size-cells': [[0]], '#interrupt-cells': [[1]], 'reg': [[64, 64]], 'compatible': ['asp
eed,ast2400-i2c-bus'], 'clocks': [[2, 26]], 'resets': [[2, 7]], 'bus-frequency': [[100000]], 'interrupts': [[0]], 'interrupt-parent': [[16]], 'status': ['okay']}, 'i2c-bus@80': {'#address-cells': [[1]], '#size-cells': [[0]], '#interrupt-cells': [[1]], 'reg': [[128, 64]], 'compatible': ['aspeed,ast2400-i2c-bus'], 'clocks': [[2, 26]], 'resets': [[2, 7]], 'bus-frequency': [[100000]], 'interrupts': [[1]], 'interrupt-parent': [[16]], 'status': ['okay']}, 'i2c-bus@c0': {'#address-cells': [[1]], '#size-cells': [[0]], '#interrupt-cells': [[1]], 'reg': [[192, 64]], 'compatible': ['aspeed,ast2400-i2c-bus'], 'clocks': [[2, 26]], 'resets': [[2, 7]], 'bus-frequency': [[100000]], 'interrupts': [[2]], 'interrupt-parent': [[16]], 'pinctrl-names': ['default'], 'pinctrl-0': [[17]], 'status': ['okay']}, 'i2c-bus@100': {'#address-cells': [[1]], '#size-cells': [[0]], '#interrupt-cells': [[1]], 'reg': [[256, 64]], 'compatible': ['aspeed,ast2400-i2c-bus'], 'clocks': [[2, 26]], 'resets': [[2, 7]], 'bus-fre
quency': [[100000]], 'interrupts': [[3]], 'interrupt-parent': [[16]], 'pinctrl-names': ['default'], 'pinctrl-0': [[18]], 'status': ['okay']}, 'i2c-bus@140': {'#address-cells': [[1]], '#size-cells': [[0]], '#interrupt-cells': [[1]], 'reg': [[320, 64]], 'compatible': ['aspeed,ast2400-i2c-bus'], 'clocks': [[2, 26]], 'resets': [[2, 7]], 'bus-frequency': [[100000]], 'interrupts': [[4]], 'interrupt-parent': [[16]], 'pinctrl-names': ['default'], 'pinctrl-0': [[19]], 'status': ['okay']}, 'i2c-bus@180': {'#address-cells': [[1]], '#size-cells': [[0]], '#interrupt-cells': [[1]], 'reg': [[384, 64]], 'compatible': ['aspeed,ast2400-i2c-bus'], 'clocks': [[2, 26]], 'resets': [[2, 7]], 'bus-frequency': [[100000]], 'interrupts': [[5]], 'interrupt-parent': [[16]], 'pinctrl-names': ['default'], 'pinctrl-0': [[20]], 'status': ['okay']}, 'i2c-bus@1c0': {'#address-cells': [[1]], '#size-cells': [[0]], '#interrupt-cells': [[1]], 'reg': [[448, 64]], 'compatible': ['aspeed,ast2400-i2c-bus'], 'clocks': [[2, 26
]], 'resets': [[2, 7]], 'bus-frequency': [[100000]], 'interrupts': [[6]], 'interrupt-parent': [[16]], 'pinctrl-names': ['default'], 'pinctrl-0': [[21]], 'status': ['okay']}, 'i2c-bus@300': {'#address-cells': [[1]], '#size-cells': [[0]], '#interrupt-cells': [[1]], 'reg': [[768, 64]], 'compatible': ['aspeed,ast2400-i2c-bus'], 'clocks': [[2, 26]], 'resets': [[2, 7]], 'bus-frequency': [[100000]], 'interrupts': [[7]], 'interrupt-parent': [[16]], 'pinctrl-names': ['default'], 'pinctrl-0': [[22]], 'status': ['okay']}, 'i2c-bus@340': {'#address-cells': [[1]], '#size-cells': [[0]], '#interrupt-cells': [[1]], 'reg': [[832, 64]], 'compatible': ['aspeed,ast2400-i2c-bus'], 'clocks': [[2, 26]], 'resets': [[2, 7]], 'bus-frequency': [[100000]], 'interrupts': [[8]], 'interrupt-parent': [[16]], 'pinctrl-names': ['default'], 'pinctrl-0': [[23]], 'status': ['okay']}, 'i2c-bus@380': {'#address-cells': [[1]], '#size-cells': [[0]], '#interrupt-cells': [[1]], 'reg': [[896, 64]], 'compatible': ['aspeed,ast2
400-i2c-bus'], 'clocks': [[2, 26]], 'resets': [[2, 7]], 'bus-frequency': [[100000]], 'interrupts': [[9]], 'interrupt-parent': [[16]], 'pinctrl-names': ['default'], 'pinctrl-0': [[24]], 'status': ['okay']}, 'i2c-bus@3c0': {'#address-cells': [[1]], '#size-cells': [[0]], '#interrupt-cells': [[1]], 'reg': [[960, 64]], 'compatible': ['aspeed,ast2400-i2c-bus'], 'clocks': [[2, 26]], 'resets': [[2, 7]], 'bus-frequency': [[100000]], 'interrupts': [[10]], 'interrupt-parent': [[16]], 'pinctrl-names': ['default'], 'pinctrl-0': [[25]], 'status': ['disabled']}, 'i2c-bus@400': {'#address-cells': [[1]], '#size-cells': [[0]], '#interrupt-cells': [[1]], 'reg': [[1024, 64]], 'compatible': ['aspeed,ast2400-i2c-bus'], 'clocks': [[2, 26]], 'resets': [[2, 7]], 'bus-frequency': [[100000]], 'interrupts': [[11]], 'interrupt-parent': [[16]], 'pinctrl-names': ['default'], 'pinctrl-0': [[26]], 'status': ['okay']}, 'i2c-bus@440': {'#address-cells': [[1]], '#size-cells': [[0]], '#interrupt-cells': [[1]], 'reg': [
[1088, 64]], 'compatible': ['aspeed,ast2400-i2c-bus'], 'clocks': [[2, 26]], 'resets': [[2, 7]], 'bus-frequency': [[100000]], 'interrupts': [[12]], 'interrupt-parent': [[16]], 'pinctrl-names': ['default'], 'pinctrl-0': [[27]], 'status': ['okay']}, 'i2c-bus@480': {'#address-cells': [[1]], '#size-cells': [[0]], '#interrupt-cells': [[1]], 'reg': [[1152, 64]], 'compatible': ['aspeed,ast2400-i2c-bus'], 'clocks': [[2, 26]], 'resets': [[2, 7]], 'bus-frequency': [[100000]], 'interrupts': [[13]], 'interrupt-parent': [[16]], 'pinctrl-names': ['default'], 'pinctrl-0': [[28]], 'status': ['disabled']}}} should not be valid under {'type': 'object'}
Cc: Andrew Geissler <geissonator@xxxxxxxxx>
Cc: Krzysztof Kozlowski <krzk+dt@xxxxxxxxxx>
Cc: Rob Herring (Arm) <robh@xxxxxxxxxx>
Cc: Ryan Chen <ryan_chen@xxxxxxxxxxxxxx>
Cc: Troy Lee <troy_lee@xxxxxxxxxxxxxx>
Link: https://github.com/devicetree-org/dt-schema/blob/c51125d571cac9596048e888a856d70650e400e0/dtschema/schemas/simple-bus.yaml#L35-L36 [1]
Link: https://github.com/openbmc/phosphor-state-manager/issues/27 [2]
Link: https://lore.kernel.org/all/20240531193115.3814887-1-robh@xxxxxxxxxx/ [3]
Link: https://lore.kernel.org/all/8dabf3d1-2d23-4adc-a804-2b7aa5fe16e9@xxxxxxxxxx/ [4]
Signed-off-by: Andrew Jeffery <andrew@xxxxxxxxxxxxxxxxxxxx>
---
If there are alternative approaches then I'm interested in hearing about
them, but from what I can see we're going to have a bit of turbulence
for some OpenBMC userspace no matter what.
---
arch/arm/boot/dts/aspeed/aspeed-g4.dtsi | 93 +++++++-----
arch/arm/boot/dts/aspeed/aspeed-g5.dtsi | 109 ++++++++------
arch/arm/boot/dts/aspeed/aspeed-g6.dtsi | 249 ++++++++++++++++++--------------
3 files changed, 251 insertions(+), 200 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi
index 78c967812492..7b1982c116f1 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi
@@ -179,8 +179,9 @@ vhub: usb-vhub@1e6a0000 {
status = "disabled";
};
- apb {
+ apb@1e6e0000 {
compatible = "simple-bus";
+ reg = <0x1e6e0000 0x00010000>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
@@ -226,52 +227,62 @@ adc: adc@1e6e9000 {
#io-channel-cells = <1>;
status = "disabled";
};
+ };
- sram: sram@1e720000 {
- compatible = "mmio-sram";
- reg = <0x1e720000 0x8000>; // 32K
- ranges;
- #address-cells = <1>;
- #size-cells = <1>;
- };
+ /* There's another APB mapping at 0x1e6f0000 for 0x00010000 */
+
+ sram: sram@1e720000 {
+ compatible = "mmio-sram";
+ reg = <0x1e720000 0x8000>; // 32K
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
+ video: video@1e700000 {
+ compatible = "aspeed,ast2400-video-engine";
+ reg = <0x1e700000 0x1000>;
+ clocks = <&syscon ASPEED_CLK_GATE_VCLK>,
+ <&syscon ASPEED_CLK_GATE_ECLK>;
+ clock-names = "vclk", "eclk";
+ interrupts = <7>;
+ status = "disabled";
+ };
+
+ sdmmc: sd-controller@1e740000 {
+ compatible = "aspeed,ast2400-sd-controller";
+ reg = <0x1e740000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x1e740000 0x10000>;
+ clocks = <&syscon ASPEED_CLK_GATE_SDCLK>;
+ status = "disabled";
- video: video@1e700000 {
- compatible = "aspeed,ast2400-video-engine";
- reg = <0x1e700000 0x1000>;
- clocks = <&syscon ASPEED_CLK_GATE_VCLK>,
- <&syscon ASPEED_CLK_GATE_ECLK>;
- clock-names = "vclk", "eclk";
- interrupts = <7>;
+ sdhci0: sdhci@100 {
+ compatible = "aspeed,ast2400-sdhci";
+ reg = <0x100 0x100>;
+ interrupts = <26>;
+ sdhci,auto-cmd12;
+ clocks = <&syscon ASPEED_CLK_SDIO>;
status = "disabled";
};
- sdmmc: sd-controller@1e740000 {
- compatible = "aspeed,ast2400-sd-controller";
- reg = <0x1e740000 0x100>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x1e740000 0x10000>;
- clocks = <&syscon ASPEED_CLK_GATE_SDCLK>;
+ sdhci1: sdhci@200 {
+ compatible = "aspeed,ast2400-sdhci";
+ reg = <0x200 0x100>;
+ interrupts = <26>;
+ sdhci,auto-cmd12;
+ clocks = <&syscon ASPEED_CLK_SDIO>;
status = "disabled";
-
- sdhci0: sdhci@100 {
- compatible = "aspeed,ast2400-sdhci";
- reg = <0x100 0x100>;
- interrupts = <26>;
- sdhci,auto-cmd12;
- clocks = <&syscon ASPEED_CLK_SDIO>;
- status = "disabled";
- };
-
- sdhci1: sdhci@200 {
- compatible = "aspeed,ast2400-sdhci";
- reg = <0x200 0x100>;
- interrupts = <26>;
- sdhci,auto-cmd12;
- clocks = <&syscon ASPEED_CLK_SDIO>;
- status = "disabled";
- };
};
+ };
+
+ apb@1e780000 {
+ compatible = "simple-bus";
+ reg = <0x1e780000 0x00010000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
gpio: gpio@1e780000 {
#gpio-cells = <2>;
@@ -454,6 +465,8 @@ i2c: bus@1e78a000 {
ranges = <0 0x1e78a000 0x1000>;
};
};
+
+ /* There's another APB mapping at 0x1e790000 for 0x00010000 */
};
};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi
index 57a699a7c149..c4d7986cd357 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi
@@ -207,8 +207,9 @@ vhub: usb-vhub@1e6a0000 {
status = "disabled";
};
- apb {
+ apb@1e6e0000 {
compatible = "simple-bus";
+ reg = <0x1e6e0000 0x00010000>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
@@ -289,53 +290,63 @@ adc: adc@1e6e9000 {
#io-channel-cells = <1>;
status = "disabled";
};
+ };
- video: video@1e700000 {
- compatible = "aspeed,ast2500-video-engine";
- reg = <0x1e700000 0x1000>;
- clocks = <&syscon ASPEED_CLK_GATE_VCLK>,
- <&syscon ASPEED_CLK_GATE_ECLK>;
- clock-names = "vclk", "eclk";
- interrupts = <7>;
- status = "disabled";
- };
+ /* There's another APB mapping at 0x1e6f0000 for 0x00010000 */
- sram: sram@1e720000 {
- compatible = "mmio-sram";
- reg = <0x1e720000 0x9000>; // 36K
- ranges;
- #address-cells = <1>;
- #size-cells = <1>;
- };
+ video: video@1e700000 {
+ compatible = "aspeed,ast2500-video-engine";
+ reg = <0x1e700000 0x1000>;
+ clocks = <&syscon ASPEED_CLK_GATE_VCLK>,
+ <&syscon ASPEED_CLK_GATE_ECLK>;
+ clock-names = "vclk", "eclk";
+ interrupts = <7>;
+ status = "disabled";
+ };
- sdmmc: sd-controller@1e740000 {
- compatible = "aspeed,ast2500-sd-controller";
- reg = <0x1e740000 0x100>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x1e740000 0x10000>;
- clocks = <&syscon ASPEED_CLK_GATE_SDCLK>;
- status = "disabled";
+ sram: sram@1e720000 {
+ compatible = "mmio-sram";
+ reg = <0x1e720000 0x9000>; // 36K
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
- sdhci0: sdhci@100 {
- compatible = "aspeed,ast2500-sdhci";
- reg = <0x100 0x100>;
- interrupts = <26>;
- sdhci,auto-cmd12;
- clocks = <&syscon ASPEED_CLK_SDIO>;
- status = "disabled";
- };
+ sdmmc: sd-controller@1e740000 {
+ compatible = "aspeed,ast2500-sd-controller";
+ reg = <0x1e740000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x1e740000 0x10000>;
+ clocks = <&syscon ASPEED_CLK_GATE_SDCLK>;
+ status = "disabled";
- sdhci1: sdhci@200 {
- compatible = "aspeed,ast2500-sdhci";
- reg = <0x200 0x100>;
- interrupts = <26>;
- sdhci,auto-cmd12;
- clocks = <&syscon ASPEED_CLK_SDIO>;
- status = "disabled";
- };
+ sdhci0: sdhci@100 {
+ compatible = "aspeed,ast2500-sdhci";
+ reg = <0x100 0x100>;
+ interrupts = <26>;
+ sdhci,auto-cmd12;
+ clocks = <&syscon ASPEED_CLK_SDIO>;
+ status = "disabled";
};
+ sdhci1: sdhci@200 {
+ compatible = "aspeed,ast2500-sdhci";
+ reg = <0x200 0x100>;
+ interrupts = <26>;
+ sdhci,auto-cmd12;
+ clocks = <&syscon ASPEED_CLK_SDIO>;
+ status = "disabled";
+ };
+ };
+
+ apb@1e780000 {
+ compatible = "simple-bus";
+ reg = <0x1e780000 0x00010000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
gpio: gpio@1e780000 {
#gpio-cells = <2>;
gpio-controller;
@@ -521,6 +532,13 @@ ibt: ibt@140 {
};
};
+ i2c: bus@1e78a000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x1e78a000 0x1000>;
+ };
+
peci0: peci-controller@1e78b000 {
compatible = "aspeed,ast2500-peci";
reg = <0x1e78b000 0x60>;
@@ -564,14 +582,9 @@ uart4: serial@1e78f000 {
no-loopback-test;
status = "disabled";
};
-
- i2c: bus@1e78a000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x1e78a000 0x1000>;
- };
};
+
+ /* There's another APB mapping at 0x1e790000 for 0x00010000 */
};
};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
index 8ed715bd53aa..88e719cc19bb 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
@@ -318,20 +318,21 @@ udc: usb@1e6a2000 {
status = "disabled";
};
- apb {
+ hace: crypto@1e6d0000 {
+ compatible = "aspeed,ast2600-hace";
+ reg = <0x1e6d0000 0x200>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&syscon ASPEED_CLK_GATE_YCLK>;
+ resets = <&syscon ASPEED_RESET_HACE>;
+ };
+
+ apb@1e6e0000 {
compatible = "simple-bus";
+ reg = <0x1e6e0000 0x00010000>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
- hace: crypto@1e6d0000 {
- compatible = "aspeed,ast2600-hace";
- reg = <0x1e6d0000 0x200>;
- interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&syscon ASPEED_CLK_GATE_YCLK>;
- resets = <&syscon ASPEED_RESET_HACE>;
- };
-
syscon: syscon@1e6e2000 {
compatible = "aspeed,ast2600-scu", "syscon", "simple-mfd";
reg = <0x1e6e2000 0x1000>;
@@ -409,6 +410,14 @@ adc1: adc@1e6e9100 {
#io-channel-cells = <1>;
status = "disabled";
};
+ };
+
+ apb@1e6f0000 {
+ compatible = "simple-bus";
+ reg = <0x1e6f0000 0x00010000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
sbc: secure-boot-controller@1e6f2000 {
compatible = "aspeed,ast2600-sbc";
@@ -422,17 +431,73 @@ acry: crypto@1e6fa000 {
clocks = <&syscon ASPEED_CLK_GATE_RSACLK>;
aspeed,ahbc = <&ahbc>;
};
+ };
+
+ video: video@1e700000 {
+ compatible = "aspeed,ast2600-video-engine";
+ reg = <0x1e700000 0x1000>;
+ clocks = <&syscon ASPEED_CLK_GATE_VCLK>,
+ <&syscon ASPEED_CLK_GATE_ECLK>;
+ clock-names = "vclk", "eclk";
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ sdc: sdc@1e740000 {
+ compatible = "aspeed,ast2600-sd-controller";
+ reg = <0x1e740000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x1e740000 0x10000>;
+ clocks = <&syscon ASPEED_CLK_GATE_SDCLK>;
+ status = "disabled";
- video: video@1e700000 {
- compatible = "aspeed,ast2600-video-engine";
- reg = <0x1e700000 0x1000>;
- clocks = <&syscon ASPEED_CLK_GATE_VCLK>,
- <&syscon ASPEED_CLK_GATE_ECLK>;
- clock-names = "vclk", "eclk";
- interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ sdhci0: sdhci@1e740100 {
+ compatible = "aspeed,ast2600-sdhci", "sdhci";
+ reg = <0x100 0x100>;
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+ sdhci,auto-cmd12;
+ clocks = <&syscon ASPEED_CLK_SDIO>;
status = "disabled";
};
+ sdhci1: sdhci@1e740200 {
+ compatible = "aspeed,ast2600-sdhci", "sdhci";
+ reg = <0x200 0x100>;
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+ sdhci,auto-cmd12;
+ clocks = <&syscon ASPEED_CLK_SDIO>;
+ status = "disabled";
+ };
+ };
+
+ emmc_controller: sdc@1e750000 {
+ compatible = "aspeed,ast2600-sd-controller";
+ reg = <0x1e750000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x1e750000 0x10000>;
+ clocks = <&syscon ASPEED_CLK_GATE_EMMCCLK>;
+ status = "disabled";
+
+ emmc: sdhci@1e750100 {
+ compatible = "aspeed,ast2600-sdhci";
+ reg = <0x100 0x100>;
+ sdhci,auto-cmd12;
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&syscon ASPEED_CLK_EMMC>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_emmc_default>;
+ };
+ };
+
+ apb@1e780000 {
+ compatible = "simple-bus";
+ reg = <0x1e780000 0x00010000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
gpio0: gpio@1e780000 {
#gpio-cells = <2>;
gpio-controller;
@@ -558,14 +623,43 @@ wdt4: watchdog@1e7850c0 {
status = "disabled";
};
- peci0: peci-controller@1e78b000 {
- compatible = "aspeed,ast2600-peci";
- reg = <0x1e78b000 0x100>;
- interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&syscon ASPEED_CLK_GATE_REF0CLK>;
- resets = <&syscon ASPEED_RESET_PECI>;
- cmd-timeout-ms = <1000>;
- clock-frequency = <1000000>;
+ vuart1: serial@1e787000 {
+ compatible = "aspeed,ast2500-vuart";
+ reg = <0x1e787000 0x40>;
+ reg-shift = <2>;
+ interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&syscon ASPEED_CLK_APB1>;
+ no-loopback-test;
+ status = "disabled";
+ };
+
+ vuart3: serial@1e787800 {
+ compatible = "aspeed,ast2500-vuart";
+ reg = <0x1e787800 0x40>;
+ reg-shift = <2>;
+ interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&syscon ASPEED_CLK_APB2>;
+ no-loopback-test;
+ status = "disabled";
+ };
+
+ vuart2: serial@1e788000 {
+ compatible = "aspeed,ast2500-vuart";
+ reg = <0x1e788000 0x40>;
+ reg-shift = <2>;
+ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&syscon ASPEED_CLK_APB1>;
+ no-loopback-test;
+ status = "disabled";
+ };
+
+ vuart4: serial@1e788800 {
+ compatible = "aspeed,ast2500-vuart";
+ reg = <0x1e788800 0x40>;
+ reg-shift = <2>;
+ interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&syscon ASPEED_CLK_APB2>;
+ no-loopback-test;
status = "disabled";
};
@@ -652,91 +746,21 @@ ibt: ibt@140 {
};
};
- sdc: sdc@1e740000 {
- compatible = "aspeed,ast2600-sd-controller";
- reg = <0x1e740000 0x100>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x1e740000 0x10000>;
- clocks = <&syscon ASPEED_CLK_GATE_SDCLK>;
- status = "disabled";
-
- sdhci0: sdhci@1e740100 {
- compatible = "aspeed,ast2600-sdhci", "sdhci";
- reg = <0x100 0x100>;
- interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
- sdhci,auto-cmd12;
- clocks = <&syscon ASPEED_CLK_SDIO>;
- status = "disabled";
- };
-
- sdhci1: sdhci@1e740200 {
- compatible = "aspeed,ast2600-sdhci", "sdhci";
- reg = <0x200 0x100>;
- interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
- sdhci,auto-cmd12;
- clocks = <&syscon ASPEED_CLK_SDIO>;
- status = "disabled";
- };
- };
-
- emmc_controller: sdc@1e750000 {
- compatible = "aspeed,ast2600-sd-controller";
- reg = <0x1e750000 0x100>;
+ i2c: bus@1e78a000 {
+ compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0 0x1e750000 0x10000>;
- clocks = <&syscon ASPEED_CLK_GATE_EMMCCLK>;
- status = "disabled";
-
- emmc: sdhci@1e750100 {
- compatible = "aspeed,ast2600-sdhci";
- reg = <0x100 0x100>;
- sdhci,auto-cmd12;
- interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&syscon ASPEED_CLK_EMMC>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_emmc_default>;
- };
- };
-
- vuart1: serial@1e787000 {
- compatible = "aspeed,ast2500-vuart";
- reg = <0x1e787000 0x40>;
- reg-shift = <2>;
- interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&syscon ASPEED_CLK_APB1>;
- no-loopback-test;
- status = "disabled";
- };
-
- vuart3: serial@1e787800 {
- compatible = "aspeed,ast2500-vuart";
- reg = <0x1e787800 0x40>;
- reg-shift = <2>;
- interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&syscon ASPEED_CLK_APB2>;
- no-loopback-test;
- status = "disabled";
- };
-
- vuart2: serial@1e788000 {
- compatible = "aspeed,ast2500-vuart";
- reg = <0x1e788000 0x40>;
- reg-shift = <2>;
- interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&syscon ASPEED_CLK_APB1>;
- no-loopback-test;
- status = "disabled";
+ ranges = <0 0x1e78a000 0x1000>;
};
- vuart4: serial@1e788800 {
- compatible = "aspeed,ast2500-vuart";
- reg = <0x1e788800 0x40>;
- reg-shift = <2>;
- interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&syscon ASPEED_CLK_APB2>;
- no-loopback-test;
+ peci0: peci-controller@1e78b000 {
+ compatible = "aspeed,ast2600-peci";
+ reg = <0x1e78b000 0x100>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&syscon ASPEED_CLK_GATE_REF0CLK>;
+ resets = <&syscon ASPEED_RESET_PECI>;
+ cmd-timeout-ms = <1000>;
+ clock-frequency = <1000000>;
status = "disabled";
};
@@ -781,6 +805,14 @@ uart4: serial@1e78f000 {
pinctrl-0 = <&pinctrl_txd4_default &pinctrl_rxd4_default>;
status = "disabled";
};
+ };
+
+ apb@1e790000 {
+ compatible = "simple-bus";
+ reg = <0x1e790000 0x00010000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
uart6: serial@1e790000 {
compatible = "ns16550a";
@@ -838,13 +870,6 @@ uart9: serial@1e790300 {
status = "disabled";
};
- i2c: bus@1e78a000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x1e78a000 0x1000>;
- };
-
fsim0: fsi@1e79b000 {
#interrupt-cells = <1>;
compatible = "aspeed,ast2600-fsi-master", "fsi-master";
---
base-commit: 6152cce5900f9cc70e62dabafa9c8b74db2d2e38
change-id: 20240821-dt-warnings-apb-nodes-3bd83b27c08c
Best regards,
--
Andrew Jeffery <andrew@xxxxxxxxxxxxxxxxxxxx>
