Re: [PATCH v4 3/4] arm64: dts: k3-am62a-wakeup: Add R5F device node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 8/20/24 5:40 AM, Hari Nagalla wrote:
From: Devarsh Thakkar <devarsht@xxxxxx>

AM62A SoCs have a single R5F core in waekup domain. This core is also
used as a device manager for the SoC.

Signed-off-by: Devarsh Thakkar <devarsht@xxxxxx>
Signed-off-by: Hari Nagalla <hnagalla@xxxxxx>
---
  arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi | 23 +++++++++++++++++++++
  1 file changed, 23 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
index f5ac101a04df..c4319986e660 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
@@ -76,6 +76,29 @@ wkup_rti0: watchdog@2b000000 {
  		status = "reserved";
  	};
+ wkup_r5fss0: r5fss@78000000 {
+		compatible = "ti,am62-r5fss";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x78000000 0x00 0x78000000 0x8000>,
+			 <0x78100000 0x00 0x78100000 0x8000>;
+		power-domains = <&k3_pds 119 TI_SCI_PD_EXCLUSIVE>;

Need newline here.

+		wkup_r5fss0_core0: r5f@78000000 {
+			compatible = "ti,am62-r5f";
+			reg = <0x78000000 0x00008000>,
+				<0x78100000 0x00008000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <121>;
+			ti,sci-proc-ids = <0x01 0xff>;
+			resets = <&k3_reset 121 1>;
+			firmware-name = "am62-wkup-r5f0_0-fw";

resets and firmware-name should go before vendor specific properties.

Andrew

+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+	};
+
  	wkup_vtm0: temperature-sensor@b00000 {
  		compatible = "ti,j7200-vtm";
  		reg = <0x00 0xb00000 0x00 0x400>,




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux