[PATCH 1/2] dt-bindings: remoteproc: qcom: document hexagon based WCSS secure PIL

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>

Add new binding document for hexagon based WCSS secure PIL remoteproc.
IPQ5332, IPQ9574 follows secure PIL remoteproc.

Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
Signed-off-by: Gokul Sriram Palanisamy <quic_gokulsri@xxxxxxxxxxx>
---
 .../remoteproc/qcom,wcss-sec-pil.yaml         | 125 ++++++++++++++++++
 1 file changed, 125 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,wcss-sec-pil.yaml

diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,wcss-sec-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,wcss-sec-pil.yaml
new file mode 100644
index 000000000000..c69401b6cec1
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,wcss-sec-pil.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,wcss-sec-pil.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm WCSS Secure Peripheral Image Loader
+
+maintainers:
+  - Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
+
+description:
+  WCSS Secure Peripheral Image Loader loads firmware and power up QDSP6
+  remoteproc's on the Qualcomm IPQ9574, IPQ5332 SoC.
+
+properties:
+  compatible:
+    enum:
+      - qcom,ipq5332-wcss-sec-pil
+      - qcom,ipq9574-wcss-sec-pil
+
+  reg:
+    maxItems: 1
+
+  firmware-name:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Firmware name for the Hexagon core
+
+  interrupts:
+    items:
+      - description: Watchdog interrupt
+      - description: Fatal interrupt
+      - description: Ready interrupt
+      - description: Handover interrupt
+      - description: Stop acknowledge interrupt
+
+  interrupt-names:
+    items:
+      - const: wdog
+      - const: fatal
+      - const: ready
+      - const: handover
+      - const: stop-ack
+
+  clocks:
+    items:
+      - description: IM SLEEP clock
+
+  clock-names:
+    items:
+      - const: im_sleep
+
+  qcom,smem-states:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: States used by the AP to signal the remote processor
+    items:
+      - description: Shutdown Q6
+      - description: Stop Q6
+
+  qcom,smem-state-names:
+    description:
+      Names of the states used by the AP to signal the remote processor
+    items:
+      - const: shutdown
+      - const: stop
+
+  memory-region:
+    items:
+      - description: Q6 reserved region
+
+  glink-edge:
+    $ref: /schemas/remoteproc/qcom,glink-edge.yaml#
+    description:
+      Qualcomm G-Link subnode which represents communication edge, channels
+      and devices related to the Modem.
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - firmware-name
+  - reg
+  - interrupts
+  - interrupt-names
+  - qcom,smem-states
+  - qcom,smem-state-names
+  - memory-region
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,ipq5332-gcc.h>
+    q6v5_wcss: remoteproc@d100000 {
+      compatible = "qcom,ipq5332-wcss-sec-pil";
+      reg = <0xd100000 0x4040>;
+      firmware-name = "ath12k/IPQ5332/hw1.0/q6_fw0.mdt";
+      interrupts-extended = <&intc GIC_SPI 291 IRQ_TYPE_EDGE_RISING>,
+                            <&wcss_smp2p_in 0 IRQ_TYPE_NONE>,
+                            <&wcss_smp2p_in 1 IRQ_TYPE_NONE>,
+                            <&wcss_smp2p_in 2 IRQ_TYPE_NONE>,
+                            <&wcss_smp2p_in 3 IRQ_TYPE_NONE>;
+      interrupt-names = "wdog",
+                        "fatal",
+                        "ready",
+                        "handover",
+                        "stop-ack";
+
+      clocks = <&gcc GCC_IM_SLEEP_CLK>;
+      clock-names = "im_sleep";
+
+      qcom,smem-states = <&wcss_smp2p_out 0>,
+                         <&wcss_smp2p_out 1>;
+      qcom,smem-state-names = "shutdown",
+                              "stop";
+
+      memory-region = <&q6_region>;
+
+      glink-edge {
+        interrupts = <GIC_SPI 417 IRQ_TYPE_EDGE_RISING>;
+        label = "rtr";
+        qcom,remote-pid = <1>;
+        mboxes = <&apcs_glb 8>;
+      };
+    };
-- 
2.34.1





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux