On 8/19/24 8:05 PM, Frank Li wrote: [...]
+ ti,keep-vref-on: + $ref: /schemas/types.yaml#/definitions/flag + description: + set to keep Vref on for differential measurements as well.
Please start sentence with uppercase letter.
+ ti,pendown-gpio-debounce: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Platform specific debounce time for the pendown-gpio. + + ti,penirq-recheck-delay-usecs: + $ref: /schemas/types.yaml#/definitions/uint16 + description: + If set to non-zero, after samples are taken this delay is applied and + penirq is rechecked, to help avoid false events. This value is + affected by the material used to build the touch layer. + + ti,pressure-max: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint16 + description: + Maximum reported pressure value. + + ti,pressure-min: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint16 + description: + Minimum reported pressure value (threshold). + + ti,settle-delay-usec: + $ref: /schemas/types.yaml#/definitions/uint16 + description: + Settling time of the analog signals; a function of Vcc and the + capacitance on the X/Y drivers. If set to non-zero, two samples are + taken with settle_delay us apart, and the second one is used. ~150 + uSec with 0.01uF caps. + + ti,swap-xy: + deprecated: true + $ref: /schemas/types.yaml#/definitions/flag + description: + swap x and y axis.
DTTO With those two fixed: Reviewed-by: Marek Vasut <marex@xxxxxxx> Thanks !