Adding Adam. On Mon, Aug 19, 2024 at 2:03 PM Frank Li <Frank.Li@xxxxxxx> wrote: > > According to binding doc, DVDD-supply and DOVDD-supply is required > properties. Add these to fix below warning: > arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dtb: camera@10: 'DVDD-supply' is a required proper > > Signed-off-by: Frank Li <Frank.Li@xxxxxxx> > --- > .../boot/dts/freescale/imx8mm-beacon-baseboard.dtsi | 16 ++++++++++++++++ > .../boot/dts/freescale/imx8mn-beacon-baseboard.dtsi | 16 ++++++++++++++++ > 2 files changed, 32 insertions(+) > > diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi > index 6086dae2e5fbe..ea1d5b9c6bae0 100644 > --- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi > +++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi > @@ -56,6 +56,20 @@ pcie0_refclk_gated: pcie0-refclk-gated { > enable-gpios = <&pca6416_1 2 GPIO_ACTIVE_LOW>; > }; > > + reg_1v5: regulator-1v5 { > + compatible = "regulator-fixed"; > + regulator-name = "1V5"; > + regulator-min-microvolt = <1500000>; > + regulator-max-microvolt = <1500000>; > + }; > + > + reg_1v8: regulator-1v8 { > + compatible = "regulator-fixed"; > + regulator-name = "1V8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > reg_audio: regulator-audio { > compatible = "regulator-fixed"; > regulator-name = "3v3_aud"; > @@ -187,6 +201,8 @@ camera@10 { > assigned-clock-parents = <&clk IMX8MM_CLK_24M>; > assigned-clock-rates = <24000000>; > AVDD-supply = <®_camera>; /* 2.8v */ > + DVDD-supply = <®_1v5>; > + DOVDD-supply = <®_1v8>; > powerdown-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; > reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; > > diff --git a/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi > index 20018ee2c803e..77d14ea459e57 100644 > --- a/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi > +++ b/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi > @@ -40,6 +40,20 @@ led-3 { > }; > }; > > + reg_1v5: regulator-1v5 { > + compatible = "regulator-fixed"; > + regulator-name = "1V5"; > + regulator-min-microvolt = <1500000>; > + regulator-max-microvolt = <1500000>; > + }; > + > + reg_1v8: regulator-1v8 { > + compatible = "regulator-fixed"; > + regulator-name = "1V8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > reg_audio: regulator-audio { > compatible = "regulator-fixed"; > regulator-name = "3v3_aud"; > @@ -158,6 +172,8 @@ camera@10 { > assigned-clock-parents = <&clk IMX8MN_CLK_24M>; > assigned-clock-rates = <24000000>; > AVDD-supply = <®_camera>; /* 2.8v */ > + DVDD-supply = <®_1v5>; > + DOVDD-supply = <®_1v8>; > powerdown-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; > reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; > > > -- > 2.34.1 >