Re: [PATCH 1/2] dt-bindings: arm-smmu: Add qcom,last-ctx-bank-reserved

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 18/08/2024 17:25, Rob Herring wrote:

> On Wed, Aug 14, 2024 at 03:59:55PM +0200, Marc Gonzalez wrote:
>
>> On qcom msm8998, writing to the last context bank of lpass_q6_smmu
>> (base address 0x05100000) produces a system freeze & reboot.
>>
>> Specifically, here:
>>
>> 	qsmmu->bypass_cbndx = smmu->num_context_banks - 1;
>> 	arm_smmu_cb_write(smmu, qsmmu->bypass_cbndx, ARM_SMMU_CB_SCTLR, 0);
>>
>> and here:
>>
>> 	arm_smmu_write_context_bank(smmu, i);
>> 	arm_smmu_cb_write(smmu, i, ARM_SMMU_CB_FSR, ARM_SMMU_CB_FSR_FAULT);
>>
>> It is likely that FW reserves the last context bank for its own use,
>> thus a simple work-around would be: DON'T USE IT in Linux.
>>
>> Signed-off-by: Marc Gonzalez <mgonzalez@xxxxxxxxxx>
>> ---
>>  Documentation/devicetree/bindings/iommu/arm,smmu.yaml | 6 ++++++
>>  1 file changed, 6 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
>> index 280b4e49f2191..f9b23aef351b0 100644
>> --- a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
>> +++ b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
>> @@ -204,6 +204,12 @@ properties:
>>        access to SMMU configuration registers. In this case non-secure aliases of
>>        secure registers have to be used during SMMU configuration.
>>  
>> +  qcom,last-ctx-bank-reserved:
>> +    type: boolean
>> +    description:
>> +      FW reserves the last context bank of this SMMU for its own use.
>> +      If Linux tries to use it, Linux gets nuked.
> 
> How is this Qualcomm specific? Presumably any implementation could do 
> this if there's no way to properly partition things. Robin?

Obviously, there is nothing Qualcomm specific about reserving   
an SMMU context bank for the FW / hypervisor, other than it
appears that qcom is the first to do it; or at least the
LPASS SMMU on qcom msm8998 is the first known SMMU where such
a work-around is required.

What is the correct nomenclature?

Can we just drop the vendor prefix if a property is generic
across vendors? But does it require a subsystem prefix like
"iommu" in order to not clash with generic props in other subsystems?

> Also, this property isn't very flexible. What happens when it is not the 
> last bank or more than 1 bank reserved? This should probably be a mask 
> instead.

OK, I'm getting conflicting requests here.

Bjorn has recommended dropping the property altogether:

> It also seems, as the different SMMUs in this platform behave
> differently it might be worth giving them further specific compatibles,
> in which case we could just check if it's the qcom,msm8998-lpass-smmu,
> instead of inventing a property for this quirk.


I'll send a patch series in line with Bjorn's request.

Regards





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux