Add initial device tree support for Qualcomm MSM8916 SoC and MTP8916
evaluation board. At the current time we only boot up a single processor.
Signed-off-by: Kumar Gala <galak@xxxxxxxxxxxxxx>
---
v4:
* Added chosen node so we dont need to spec everything for earlycon
* fixed up timer node to armv8, dropped clock-frequency
v3:
* Removed qcom,msm-id and qcom,board-id
* Added top level compat for "qcom,msm8916-mtp-smb1360"
v2:
* Updated to dropping CONFIG_ARCH_QCOM_MSM8916
* Updated to use qcom-ids.h
arch/arm64/boot/dts/Makefile | 1 +
arch/arm64/boot/dts/qcom/Makefile | 5 +
arch/arm64/boot/dts/qcom/msm8916-mtp.dts | 21 ++++
arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi | 28 +++++
arch/arm64/boot/dts/qcom/msm8916.dtsi | 183 ++++++++++++++++++++++++++++++
5 files changed, 238 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/Makefile
create mode 100644 arch/arm64/boot/dts/qcom/msm8916-mtp.dts
create mode 100644 arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi
create mode 100644 arch/arm64/boot/dts/qcom/msm8916.dtsi
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
index e0350ca..8517f15 100644
--- a/arch/arm64/boot/dts/Makefile
+++ b/arch/arm64/boot/dts/Makefile
@@ -5,5 +5,6 @@ dts-dirs += cavium
dts-dirs += exynos
dts-dirs += freescale
dts-dirs += mediatek
+dts-dirs += qcom
subdir-y := $(dts-dirs)
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
new file mode 100644
index 0000000..360ec4c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -0,0 +1,5 @@
+dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb
+
+always := $(dtb-y)
+subdir-y := $(dts-dirs)
+clean-files := *.dtb
diff --git a/arch/arm64/boot/dts/qcom/msm8916-mtp.dts b/arch/arm64/boot/dts/qcom/msm8916-mtp.dts
new file mode 100644
index 0000000..784ad92
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-mtp.dts
@@ -0,0 +1,21 @@
+/* Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
+*
+* This program is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License version 2 and
+* only version 2 as published by the Free Software Foundation.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*/
+
+/dts-v1/;
+
+#include "msm8916-mtp.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. MSM 8916 MTP";
+ compatible = "qcom,msm8916-mtp", "qcom,msm8916-mtp-smb1360",
+ "qcom,msm8916", "qcom,mtp";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi
new file mode 100644
index 0000000..270ba55
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi
@@ -0,0 +1,28 @@
+/* Copyright (c) 2014-2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include "msm8916.dtsi"
+
+/ {
+ chosen {
+ stdout-path = &blsp1_uart2;
+ };
+
+ soc {
+ serial@78b0000 {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp1_uart2_default>;
+ pinctrl-1 = <&blsp1_uart2_sleep>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
new file mode 100644
index 0000000..8c8fd49
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -0,0 +1,183 @@
+/* Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-msm8916.h>
+#include <dt-bindings/reset/qcom,gcc-msm8916.h>
+
+/ {
+ model = "Qualcomm Technologies, Inc. MSM8916";
+ compatible = "qcom,msm8916";
+
+ interrupt-parent = <&intc>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ CPU0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0>;
+ };
+
+ CPU1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x1>;
+ };
+
+ CPU2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x2>;
+ };
+
+ CPU3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x3>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ soc: soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0xffffffff>;
+ compatible = "simple-bus";
+
+ pinctrl@1000000 {
+ compatible = "qcom,msm8916-pinctrl";
+ reg = <0x1000000 0x300000>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ blsp1_uart2_default: blsp1_uart2_default {
+ pinmux {
+ function = "blsp_uart2";
+ pins = "gpio4", "gpio5";
+ };
+ pinconf {
+ pins = "gpio4", "gpio5";
+ drive-strength = <16>;
+ bias-disable;
+ };
+ };
+
+ blsp1_uart2_sleep: blsp1_uart2_sleep {
+ pinmux {
+ function = "blsp_uart2";
+ pins = "gpio4", "gpio5";
+ };
+ pinconf {
+ pins = "gpio4", "gpio5";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+ };
+
+ gcc: qcom,gcc@1800000 {
+ compatible = "qcom,gcc-msm8916";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ reg = <0x1800000 0x80000>;
+ };
+
+ blsp1_uart2: serial@78b0000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x78b0000 0x200>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
+ intc: interrupt-controller@b000000 {
+ compatible = "qcom,msm-qgic2";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>;
+ };
+
+ timer@b020000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ compatible = "arm,armv7-timer-mem";
+ reg = <0xb020000 0x1000>;
+ clock-frequency = <19200000>;
+
+ frame@b021000 {
+ frame-number = <0>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xb021000 0x1000>,
+ <0xb022000 0x1000>;
+ };
+
+ frame@b023000 {
+ frame-number = <1>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xb023000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@b024000 {
+ frame-number = <2>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xb024000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@b025000 {
+ frame-number = <3>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xb025000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@b026000 {
+ frame-number = <4>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xb026000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@b027000 {
+ frame-number = <5>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xb027000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@b028000 {
+ frame-number = <6>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xb028000 0x1000>;
+ status = "disabled";
+ };
+ };
+ };
+};
--
Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
