On Fri, 2024-08-16 at 17:23 +0800, Delphine CC Chiu wrote:
> Add power sensor for power module reading
>
> Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
> ---
> .../aspeed/aspeed-bmc-facebook-yosemite4.dts | 25 +++++++++++++++++++
> 1 file changed, 25 insertions(+)
>
> diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
> index 09bbbcb192f5..139a09de24cf 100644
> --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
> +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
> @@ -906,6 +906,11 @@ gpio@23 {
> "HSC7_ALERT2_R_N","HSC8_ALERT2_R_N";
> };
>
> + power-sensor@40 {
> + compatible = "mps,mp5023";
> + reg = <0x40>;
> + };
> +
This appears to be supported by hmwon but there's no binding for the
driver[1]. I'm hesitant to accept it and add more warnings to the
Aspeed devicetrees, but at the same time I'm sympathetic to leaving it
in.
Can you perhaps send a patch for
Documentation/devicetree/bindings/trivial-devices.yaml along with this
series?
Andrew
[1]: https://lore.kernel.org/all/20211217155206.GA3015782@xxxxxxxxxxxx/
