Re: [PATCH v3] arm64: dts: imx8mp: Add DT nodes for the two ISPs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, Aug 18, 2024 at 2:07 PM Laurent Pinchart
<laurent.pinchart@xxxxxxxxxxxxxxxx> wrote:
>
> On Sun, Aug 18, 2024 at 01:24:01PM -0500, Adam Ford wrote:
> > On Tue, Aug 13, 2024 at 6:40 PM Laurent Pinchart
> > <laurent.pinchart@xxxxxxxxxxxxxxxx> wrote:
> > >
> > > From: Paul Elder <paul.elder@xxxxxxxxxxxxxxxx>
> > >
> > > The ISP supports both CSI and parallel interfaces, where port 0
> > > corresponds to the former and port 1 corresponds to the latter. Since
> > > the i.MX8MP's ISPs are connected by the parallel interface to the CSI
> > > receiver, set them both to port 1.
> > >
> > > Signed-off-by: Paul Elder <paul.elder@xxxxxxxxxxxxxxxx>
> > > Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> > > Tested-by: Adam Ford <aford173@xxxxxxxxx> # imx8mp-beacon
> > > ---
> > > Changes since v2:
> > >
> > > - Assign clock parent and frequency in blk-ctrl
> > >
> > > Changes since v1:
> > >
> > > - Fix clock ordering
> > > - Add #address-cells and #size-cells to ports nodes
> > > ---
> > >  arch/arm64/boot/dts/freescale/imx8mp.dtsi | 51 ++++++++++++++++++++++-
> > >  1 file changed, 49 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > > index d9b5c40f6460..09f1e27ee220 100644
> > > --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > > +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > > @@ -1673,6 +1673,50 @@ isi_in_1: endpoint {
> > >                                 };
> > >                         };
> > >
> > > +                       isp_0: isp@32e10000 {
> > > +                               compatible = "fsl,imx8mp-isp";
> > > +                               reg = <0x32e10000 0x10000>;
> > > +                               interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
> > > +                               clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>,
> > > +                                        <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>,
> > > +                                        <&clk IMX8MP_CLK_MEDIA_APB_ROOT>;
> > > +                               clock-names = "isp", "aclk", "hclk";
> > > +                               power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_ISP>;
> > > +                               fsl,blk-ctrl = <&media_blk_ctrl 0>;
> > > +                               status = "disabled";
> > > +
> > > +                               ports {
> > > +                                       #address-cells = <1>;
> > > +                                       #size-cells = <0>;
> > > +
> > > +                                       port@1 {
> > > +                                               reg = <1>;
> > > +                                       };
> > > +                               };
> > > +                       };
> > > +
> > > +                       isp_1: isp@32e20000 {
> > > +                               compatible = "fsl,imx8mp-isp";
> > > +                               reg = <0x32e20000 0x10000>;
> > > +                               interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
> > > +                               clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>,
> > > +                                        <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>,
> > > +                                        <&clk IMX8MP_CLK_MEDIA_APB_ROOT>;
> > > +                               clock-names = "isp", "aclk", "hclk";
> > > +                               power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_ISP>;
> > > +                               fsl,blk-ctrl = <&media_blk_ctrl 1>;
> > > +                               status = "disabled";
> > > +
> > > +                               ports {
> > > +                                       #address-cells = <1>;
> > > +                                       #size-cells = <0>;
> > > +
> > > +                                       port@1 {
> > > +                                               reg = <1>;
> > > +                                       };
> > > +                               };
> > > +                       };
> > > +
> > >                         dewarp: dwe@32e30000 {
> > >                                 compatible = "nxp,imx8mp-dw100";
> > >                                 reg = <0x32e30000 0x10000>;
> > > @@ -1873,13 +1917,16 @@ media_blk_ctrl: blk-ctrl@32ec0000 {
> > >                                                   <&clk IMX8MP_CLK_MEDIA_APB>,
> > >                                                   <&clk IMX8MP_CLK_MEDIA_DISP1_PIX>,
> > >                                                   <&clk IMX8MP_CLK_MEDIA_DISP2_PIX>,
> > > +                                                 <&clk IMX8MP_CLK_MEDIA_ISP>,
> > >                                                   <&clk IMX8MP_VIDEO_PLL1>;
> > >                                 assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>,
> > >                                                          <&clk IMX8MP_SYS_PLL1_800M>,
> > >                                                          <&clk IMX8MP_VIDEO_PLL1_OUT>,
> > > -                                                        <&clk IMX8MP_VIDEO_PLL1_OUT>;
> > > +                                                        <&clk IMX8MP_VIDEO_PLL1_OUT>,
> > > +                                                        <&clk IMX8MP_SYS_PLL2_500M>;
> > >                                 assigned-clock-rates = <500000000>, <200000000>,
> > > -                                                      <0>, <0>, <1039500000>;
> > > +                                                      <0>, <0>, <0>, <500000000>,
> >
> > Is the insertion of the extra <0> here correct?  You inserted one
> > clock above for IMX8MP_CLK_MEDIA_ISP, but it appears you inserted two
> > here.
> > I think this might break the IMX8MP_VIDEO_PLL1 rate and not set the
> > IMX8MP_CLK_MEDIA_ISP as expected.
> >
> > Am I missing something?
>
> You're missing v4 :-)

Sorry.  I was traveling in Europe, so I was going through the backlog
in the order they arrived.  :-)

adam

>
> > > +                                                      <1039500000>;
> > >                                 #power-domain-cells = <1>;
> > >
> > >                                 lvds_bridge: bridge@5c {
> > >
> > > base-commit: 7c626ce4bae1ac14f60076d00eafe71af30450ba
>
> --
> Regards,
>
> Laurent Pinchart





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux