On Thu, Aug 15, 2024 at 02:12:09PM +0200, Alexander Stein wrote: > Am Mittwoch, 14. August 2024, 01:40:10 CEST schrieb Laurent Pinchart: > > The DT nodes for the MIPI CSI-2 receivers (MIPI_CSI) configure the > > CAM1_PIX and CAM2_PIX clocks to 266 MHz through the assigned-clock-rates > > property, and report that frequency in the clock-frequency property. The > > i.MX8MP reference manual and datasheet list 266 MHz as a nominal > > frequency when using both CSI-2 receivers, so all looks normal. > > > > In reality, the clock is actually set to 250 MHz, as the selected > > parent, IMX8MP_SYS_PLL2_1000M, has a 1/4 output that is selected as the > > closest frequency to 266 MHz. This doesn't break operation of the > > device, but is clearly misleading. > > > > Clarify the clock configuration by selecting the IMX8MP_SYS_PLL2_250M > > parent, dropping the redundant assigned-clock-rates, and setting > > clock-frequency to 250 MHz. This doesn't cause any functional change. > > > > Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> > > --- > > arch/arm64/boot/dts/freescale/imx8mp.dtsi | 10 ++++------ > > 1 file changed, 4 insertions(+), 6 deletions(-) > > > > diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi > > index 603dfe80216f..d9b5c40f6460 100644 > > --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi > > +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi > > @@ -1687,7 +1687,7 @@ mipi_csi_0: csi@32e40000 { > > compatible = "fsl,imx8mp-mipi-csi2", "fsl,imx8mm-mipi-csi2"; > > reg = <0x32e40000 0x10000>; > > interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; > > - clock-frequency = <266000000>; > > + clock-frequency = <250000000>; > > This doesn't seem to be necessary, no? I can't be read from > IMX8MP_CLK_MEDIA_CAM1_PIX_ROOT. But oh well, that's what we have right now. I don't like the clock frequency property much, but as it's there, I decided to update it. Removing the property, if desired, belongs to a separate patch. > Despite that: > Reviewed-by: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx> > Tested-by: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx> Shawn, could you please pick this up for v6.12 ? > > clocks = <&clk IMX8MP_CLK_MEDIA_APB_ROOT>, > > <&clk IMX8MP_CLK_MEDIA_CAM1_PIX_ROOT>, > > <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF_ROOT>, > > @@ -1695,9 +1695,8 @@ mipi_csi_0: csi@32e40000 { > > clock-names = "pclk", "wrap", "phy", "axi"; > > assigned-clocks = <&clk IMX8MP_CLK_MEDIA_CAM1_PIX>, > > <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF>; > > - assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>, > > + assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_250M>, > > <&clk IMX8MP_CLK_24M>; > > - assigned-clock-rates = <266000000>; > > power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_CSI2_1>; > > status = "disabled"; > > > > @@ -1723,7 +1722,7 @@ mipi_csi_1: csi@32e50000 { > > compatible = "fsl,imx8mp-mipi-csi2", "fsl,imx8mm-mipi-csi2"; > > reg = <0x32e50000 0x10000>; > > interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; > > - clock-frequency = <266000000>; > > + clock-frequency = <250000000>; > > clocks = <&clk IMX8MP_CLK_MEDIA_APB_ROOT>, > > <&clk IMX8MP_CLK_MEDIA_CAM2_PIX_ROOT>, > > <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF_ROOT>, > > @@ -1731,9 +1730,8 @@ mipi_csi_1: csi@32e50000 { > > clock-names = "pclk", "wrap", "phy", "axi"; > > assigned-clocks = <&clk IMX8MP_CLK_MEDIA_CAM2_PIX>, > > <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF>; > > - assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>, > > + assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_250M>, > > <&clk IMX8MP_CLK_24M>; > > - assigned-clock-rates = <266000000>; > > power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_CSI2_2>; > > status = "disabled"; > > > > > > base-commit: 7c626ce4bae1ac14f60076d00eafe71af30450ba -- Regards, Laurent Pinchart