Fix interrupt sources for rti routed to the ESM0 as per [0], in 10.4 Interrupt Sources Add comments to describe what interrupt sources are routed to ESM modules. [0] https://www.ti.com/lit/ug/spruj83/spruj83.pdf Fixes: b5080c7c1f7e ("arm64: dts: ti: k3-am62p: Add nodes for more IPs") Signed-off-by: Judith Mendez <jm@xxxxxx> --- Changes since v2: - No change --- arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi | 3 ++- arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi | 5 +++-- 2 files changed, 5 insertions(+), 3 deletions(-) diff --git a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi index 9701fc69aed94..7941aab09cf72 100644 --- a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi @@ -260,7 +260,8 @@ main_pmx0: pinctrl@f4000 { main_esm: esm@420000 { compatible = "ti,j721e-esm"; reg = <0x00 0x420000 0x00 0x1000>; - ti,esm-pins = <160>, <161>, <162>, <163>, <177>, <178>; + /* Interrupt sources: rti0, rti1, wrti0 rti2, rti3, rti15 */ + ti,esm-pins = <224>, <225>, <227>, <241>, <242>, <248>; bootph-pre-ram; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi index df7945156397b..49dda340752aa 100644 --- a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi @@ -26,9 +26,10 @@ mcu_pmx_range: gpio-range { mcu_esm: esm@4100000 { compatible = "ti,j721e-esm"; reg = <0x00 0x4100000 0x00 0x1000>; - ti,esm-pins = <0>, <1>, <2>, <85>; - status = "reserved"; + /* Interrupt sources: esm0_cfg, esm0_hi, esm0_low, mrti0, wrti0 */ + ti,esm-pins = <0>, <1>, <2>, <85>, <86>; bootph-pre-ram; + status = "reserved"; }; /* -- 2.46.0
