From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx> When the binding for this was originally written, and later modified, mistakes were made - and the precise nature of the later modification should have been a giveaway, but alas I was naive at the time. A more correct modelling of the hardware is to use two syscons and have a single reg entry for the mailbox, containing the mailbox region. The two syscons contain the general control/status registers for the mailbox and the interrupt related registers respectively. The reason for two syscons is that the same mailbox is present on the non-SoC version of the FPGA, which has no interrupt controller, and the shared part of the rtl was unchanged between devices. This is now coming to a head, because the control/status registers share a register region with the "tvs" (temperature & voltage sensors) registers and, as it turns out, people do want to monitor temperatures and voltages... Signed-off-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx> --- .../bindings/mailbox/microchip,mpfs-mailbox.yaml | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/Documentation/devicetree/bindings/mailbox/microchip,mpfs-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/microchip,mpfs-mailbox.yaml index 404477910f02..3af599efd359 100644 --- a/Documentation/devicetree/bindings/mailbox/microchip,mpfs-mailbox.yaml +++ b/Documentation/devicetree/bindings/mailbox/microchip,mpfs-mailbox.yaml @@ -15,6 +15,8 @@ properties: reg: oneOf: + - items: + - description: mailbox data registers - items: - description: mailbox control & data registers - description: mailbox interrupt registers @@ -23,6 +25,7 @@ properties: - description: mailbox control registers - description: mailbox interrupt registers - description: mailbox data registers + deprecated: true interrupts: maxItems: 1 @@ -41,12 +44,9 @@ additionalProperties: false examples: - | soc { - #address-cells = <2>; - #size-cells = <2>; - mbox: mailbox@37020000 { + mailbox@37020800 { compatible = "microchip,mpfs-mailbox"; - reg = <0x0 0x37020000 0x0 0x58>, <0x0 0x2000318C 0x0 0x40>, - <0x0 0x37020800 0x0 0x100>; + reg = <0x37020800 0x100>; interrupt-parent = <&L1>; interrupts = <96>; #mbox-cells = <1>; -- 2.43.0