From: Alessandro Zini <alessandro.zini@xxxxxxxxxxx> Enable throttling down the cpu frequency when an alert temperature threshold (lower than the critical threshold) is reached. Signed-off-by: Alessandro Zini <alessandro.zini@xxxxxxxxxxx> --- arch/arm64/boot/dts/ti/k3-am62-thermal.dtsi | 34 +++++++++++++++++++++ arch/arm64/boot/dts/ti/k3-am625.dtsi | 4 +++ 2 files changed, 38 insertions(+) diff --git a/arch/arm64/boot/dts/ti/k3-am62-thermal.dtsi b/arch/arm64/boot/dts/ti/k3-am62-thermal.dtsi index a358757e26f0..c1683bbb241d 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-thermal.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62-thermal.dtsi @@ -9,12 +9,29 @@ main0_thermal: main0-thermal { thermal-sensors = <&wkup_vtm0 0>; trips { + main0_alert: main0-alert { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + main0_crit: main0-crit { temperature = <105000>; /* milliCelsius */ hysteresis = <2000>; /* milliCelsius */ type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&main0_alert>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; main1_thermal: main1-thermal { @@ -23,11 +40,28 @@ main1_thermal: main1-thermal { thermal-sensors = <&wkup_vtm0 1>; trips { + main1_alert: main1-alert { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + main1_crit: main1-crit { temperature = <105000>; /* milliCelsius */ hysteresis = <2000>; /* milliCelsius */ type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&main1_alert>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am625.dtsi b/arch/arm64/boot/dts/ti/k3-am625.dtsi index 4193c2b3eed6..091aebb41dd9 100644 --- a/arch/arm64/boot/dts/ti/k3-am625.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am625.dtsi @@ -50,6 +50,7 @@ cpu0: cpu@0 { next-level-cache = <&L2_0>; operating-points-v2 = <&a53_opp_table>; clocks = <&k3_clks 135 0>; + #cooling-cells = <2>; }; cpu1: cpu@1 { @@ -66,6 +67,7 @@ cpu1: cpu@1 { next-level-cache = <&L2_0>; operating-points-v2 = <&a53_opp_table>; clocks = <&k3_clks 136 0>; + #cooling-cells = <2>; }; cpu2: cpu@2 { @@ -82,6 +84,7 @@ cpu2: cpu@2 { next-level-cache = <&L2_0>; operating-points-v2 = <&a53_opp_table>; clocks = <&k3_clks 137 0>; + #cooling-cells = <2>; }; cpu3: cpu@3 { @@ -98,6 +101,7 @@ cpu3: cpu@3 { next-level-cache = <&L2_0>; operating-points-v2 = <&a53_opp_table>; clocks = <&k3_clks 138 0>; + #cooling-cells = <2>; }; }; -- 2.46.0