The remoteproc firmware like of R5F and DSPs in the MAIN voltage domain
use timers. Therefore, change the status of the timer nodes to
"reserved" to avoid any clash. Usage is described as below:
+===================+==========================+
| Remoteproc node | Timer Node |
+===================+==========================+
| main_r5fss0_core0 | main_timer0, main_timer2 |
+-------------------+--------------------------+
| main_r5fss0_core1 | main_timer1 |
+-------------------+--------------------------+
This change is already incorporated for timer nodes in the MCU voltage
domain.
Fixes: c8a28ed4837c ("arm64: dts: ti: k3-j7200: Add general purpose timers")
Signed-off-by: Beleswar Padhi <b-padhi@xxxxxx>
---
.../boot/dts/ti/k3-j7200-common-proc-board.dts | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
index 6593c5da82c0..a65066bd7f09 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
@@ -471,3 +471,16 @@ &main_mcan3 {
pinctrl-0 = <&main_mcan3_pins_default>;
phys = <&transceiver3>;
};
+
+/* Timers are used by Remoteproc firmware */
+&main_timer0 {
+ status = "reserved";
+};
+
+&main_timer1 {
+ status = "reserved";
+};
+
+&main_timer2 {
+ status = "reserved";
+};
--
2.34.1
