On Tue, 13 Aug 2024 19:00:41 -0400, Richard Acayan wrote: > As found in the Pixel 3a, the Snapdragon 670 has a camera subsystem with > 3 CSIDs and 3 VFEs (including 1 VFE lite). Add this camera subsystem to > the bindings. > > Adapted from SC8280XP camera subsystem. > > Signed-off-by: Richard Acayan <mailingradian@xxxxxxxxx> > --- > .../bindings/media/qcom,sdm670-camss.yaml | 324 ++++++++++++++++++ > 1 file changed, 324 insertions(+) > create mode 100644 Documentation/devicetree/bindings/media/qcom,sdm670-camss.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: Documentation/devicetree/bindings/media/qcom,sdm670-camss.example.dts:32.19-150.15: Warning (unit_address_vs_reg): /example-0/soc/camss: node has a reg or ranges property, but no unit name Documentation/devicetree/bindings/media/qcom,sdm670-camss.example.dts:142.46-147.27: Warning (unit_address_vs_reg): /example-0/soc/camss/ports/port@0/endpoint: node has a reg or ranges property, but no unit name Documentation/devicetree/bindings/media/qcom,sdm670-camss.example.dts:142.46-147.27: Warning (graph_endpoint): /example-0/soc/camss/ports/port@0/endpoint: graph node unit address error, expected "0" /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/qcom,sdm670-camss.example.dtb: camss: reg-names:0: 'csid0' was expected from schema $id: http://devicetree.org/schemas/media/qcom,sdm670-camss.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/qcom,sdm670-camss.example.dtb: camss: reg-names:1: 'csid1' was expected from schema $id: http://devicetree.org/schemas/media/qcom,sdm670-camss.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/qcom,sdm670-camss.example.dtb: camss: reg-names:2: 'csid2' was expected from schema $id: http://devicetree.org/schemas/media/qcom,sdm670-camss.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/qcom,sdm670-camss.example.dtb: camss: reg-names:4: 'csiphy0' was expected from schema $id: http://devicetree.org/schemas/media/qcom,sdm670-camss.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/qcom,sdm670-camss.example.dtb: camss: reg-names:6: 'csiphy1' was expected from schema $id: http://devicetree.org/schemas/media/qcom,sdm670-camss.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/qcom,sdm670-camss.example.dtb: camss: reg-names:8: 'csiphy2' was expected from schema $id: http://devicetree.org/schemas/media/qcom,sdm670-camss.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/qcom,sdm670-camss.example.dtb: camss: 'interconnects' is a required property from schema $id: http://devicetree.org/schemas/media/qcom,sdm670-camss.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/qcom,sdm670-camss.example.dtb: camss: 'interconnect-names' is a required property from schema $id: http://devicetree.org/schemas/media/qcom,sdm670-camss.yaml# doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240813230037.84004-10-mailingradian@xxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
