On 12/08/2024 15:41, Depeng Shao wrote:
v4:
- Update dt-bindings based on comments - Krzysztof, bod, Vladimir
- Move common code into csid core and vfe core driver - bod
- Remove *_relaxed in the csid and vfe drivers - Krzysztof
- Reorganize patches in logical junks, make sure that new added
structures have users in current patch - Krzysztof
- Remove notify function and add new functions in camss for buf done
and reg update - bod
- Remove custom code to get csid base - bod
- Remove ISR function in vfe780 driver since it is never fired - bod
- Move csid_top_base to camss structure since we only have one csid
top block, and just need to get base once for csid top
- Add Vladimir's RB
- Remove prerequisite-patch-id in the cover letter since the changes
have been merged
- Add dtsi patch link for reference - Krzysztof
https://lore.kernel.org/all/20240807123333.2056518-1-quic_depengs@xxxxxxxxxxx/
- Link to v3: https://lore.kernel.org/all/20240709160656.31146-1-quic_depengs@xxxxxxxxxxx/
v3:
- Rebased the change based on below change which will be merged firstly.
"Move camss version related defs in to resources"
Link: https://lore.kernel.org/all/20240522154659.510-1-quic_grosikop@xxxxxxxxxxx/
- Rebased the change based on Bryan's csiphy optimization change and add
these changes into this series, so that the new csiphy-3ph driver don't
need to add duplicate code. This has got Bryan's permission to add his
patches into this series.
- Refactor some changes based on the comments to move the random code to
patches where they are used.
- Remove the vfe780 irq function since it isn't doing the actual work.
- Add dt-binding for sm8550 camss driver.
Link to V2: https://lore.kernel.org/all/20240320141136.26827-1-quic_depengs@xxxxxxxxxxx/
v2:
- Update some commit messages
Link to V1: https://lore.kernel.org/all/20240320134227.16587-1-quic_depengs@xxxxxxxxxxx/
v1:
SM8550 is a Qualcomm flagship SoC. This series adds support to
bring up the CSIPHY, CSID, VFE/RDI interfaces in SM8550.
SM8550 provides
- 3 x VFE, 3 RDI per VFE
- 2 x VFE Lite, 4 RDI per VFE
- 3 x CSID
- 2 x CSID Lite
- 8 x CSI PHY
---
@Depeng.
Can you please fix the following checkpatch splats.
scripts/checkpatch.pl --strict *.patch
total: 0 errors, 0 warnings, 0 checks, 20 lines checked
0001-media-qcom-camss-csiphy-3ph-Fix-trivial-indentation-.patch has no
obvious style problems and is ready for submission.
total: 0 errors, 0 warnings, 0 checks, 589 lines checked
0002-media-qcom-camss-csiphy-3ph-Remove-redundant-PHY-ini.patch has no
obvious style problems and is ready for submission.
total: 0 errors, 0 warnings, 0 checks, 40 lines checked
0003-media-qcom-camss-csiphy-3ph-Rename-struct.patch has no obvious
style problems and is ready for submission.
total: 0 errors, 0 warnings, 0 checks, 49 lines checked
0004-media-qcom-camss-csiphy-Add-an-init-callback-to-CSI-.patch has no
obvious style problems and is ready for submission.
total: 0 errors, 0 warnings, 0 checks, 82 lines checked
0005-media-qcom-camss-csiphy-3ph-Move-CSIPHY-variables-to.patch has no
obvious style problems and is ready for submission.
CHECK: Macro argument 'offset' may be better as '(offset)' to avoid
precedence issues
#33: FILE: drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c:45:
+#define CSIPHY_3PH_CMN_CSI_COMMON_CTRLn(offset, n) (offset + 0x4 * (n))
CHECK: Macro argument 'offset' may be better as '(offset)' to avoid
precedence issues
#38: FILE: drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c:49:
+#define CSIPHY_3PH_CMN_CSI_COMMON_STATUSn(offset, n) ((offset + 0xb0) +
0x4 * (n))
total: 0 errors, 0 warnings, 2 checks, 157 lines checked
NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or
--fix-inplace.
0006-media-qcom-camss-csiphy-3ph-Use-an-offset-variable-t.patch has
style problems, please review.
NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#19:
new file mode 100644
total: 0 errors, 1 warnings, 0 checks, 517 lines checked
NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or
--fix-inplace.
0007-dt-bindings-media-camss-Add-qcom-sm8550-camss-bindin.patch has
style problems, please review.
NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
CHECK: Alignment should match open parenthesis
#255: FILE: drivers/media/platform/qcom/camss/camss-csid.c:616:
+ dev_info(csid->camss->dev, "CSID:%d HW Version = %u.%u.%u\n",
+ csid->id, hw_gen, hw_rev, hw_step);
total: 0 errors, 0 warnings, 1 checks, 289 lines checked
NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or
--fix-inplace.
0008-media-qcom-camss-csid-Move-common-code-into-csid-cor.patch has
style problems, please review.
NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
CHECK: braces {} should be used on all arms of this statement
#677: FILE: drivers/media/platform/qcom/camss/camss-vfe.c:470:
+ if (output->buf[index]) {
[...]
+ } else
[...]
CHECK: Unbalanced braces around else statement
#682: FILE: drivers/media/platform/qcom/camss/camss-vfe.c:475:
+ } else
CHECK: Alignment should match open parenthesis
#775: FILE: drivers/media/platform/qcom/camss/camss-vfe.c:568:
+ if (output->state == VFE_OUTPUT_ON &&
+ output->gen2.active_num < 2) {
total: 0 errors, 0 warnings, 3 checks, 885 lines checked
NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or
--fix-inplace.
0009-media-qcom-camss-vfe-Move-common-code-into-vfe-core.patch has style
problems, please review.
NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
total: 0 errors, 0 warnings, 0 checks, 67 lines checked
0010-media-qcom-camss-Add-sm8550-compatible.patch has no obvious style
problems and is ready for submission.
0010-media-qcom-camss-Add-sm8550-compatible.patch:6: drvier ==> driver
total: 0 errors, 0 warnings, 0 checks, 253 lines checked
0011-media-qcom-camss-csiphy-3ph-Add-Gen2-v2.1.2-two-phas.patch has no
obvious style problems and is ready for submission.
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#42:
new file mode 100644
CHECK: Please use a blank line after function/struct/union/enum declarations
#146: FILE: drivers/media/platform/qcom/camss/camss-csid-gen3.c:100:
+}
+#define REG_UPDATE_RDI reg_update_rdi
CHECK: Alignment should match open parenthesis
#337: FILE: drivers/media/platform/qcom/camss/camss-csid-gen3.c:291:
+ writel(BIT(BUF_DONE_IRQ_STATUS_RDI_OFFSET + i),
+ csid->base + CSID_BUF_DONE_IRQ_CLEAR);
CHECK: Alignment should match open parenthesis
#340: FILE: drivers/media/platform/qcom/camss/camss-csid-gen3.c:294:
+ writel(BIT(BUF_DONE_IRQ_STATUS_RDI_OFFSET + i),
+ csid->base + CSID_BUF_DONE_IRQ_MASK);
CHECK: Please don't use multiple blank lines
#412: FILE: drivers/media/platform/qcom/camss/camss-csid-gen3.h:21:
+
+
CHECK: Unnecessary parentheses around camss->vfe[hw_id]
#643: FILE: drivers/media/platform/qcom/camss/camss.c:1854:
+ vfe = &(camss->vfe[hw_id]);
total: 0 errors, 1 warnings, 5 checks, 607 lines checked
NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or
--fix-inplace.
0012-media-qcom-camss-Add-CSID-Gen3-support-for-sm8550.patch has style
problems, please review.
NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#37:
new file mode 100644
CHECK: Alignment should match open parenthesis
#219: FILE: drivers/media/platform/qcom/camss/camss-vfe.c:684:
+ time = wait_for_completion_timeout(&vfe->reset_complete,
+ msecs_to_jiffies(VFE_RESET_TIMEOUT_MS));
CHECK: Unnecessary parentheses around camss->csid[hw_id]
#415: FILE: drivers/media/platform/qcom/camss/camss.c:1973:
+ csid = &(camss->csid[hw_id]);
total: 0 errors, 1 warnings, 2 checks, 388 lines checked
NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or
--fix-inplace.
0013-media-qcom-camss-Add-support-for-VFE-hardware-versio.patch has
style problems, please review.
NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
---
bod
