Rename gpio uart4_rs485_en to uart4-rs485-en-hog to fix below warning:
arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs232.dtb:
gpio@30220000: 'uart4_rs485_en' does not match any of the regexes: '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', 'pinctrl-[0-9]+'
Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
---
arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs232.dtso | 2 +-
arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs485.dtso | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs232.dtso b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs232.dtso
index f1f38b739ef76..78f4e8d5814da 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs232.dtso
+++ b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs232.dtso
@@ -18,7 +18,7 @@ &gpio3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio3_hog>;
- uart4_rs485_en {
+ uart4-rs485-en-hog {
gpio-hog;
gpios = <20 GPIO_ACTIVE_HIGH>;
output-low;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs485.dtso b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs485.dtso
index 1d8951e1a47e8..66288948bdd39 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs485.dtso
+++ b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs485.dtso
@@ -19,7 +19,7 @@ &gpio3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio3_hog>;
- uart4_rs485_en {
+ uart4-rs485-en-hog {
gpio-hog;
gpios = <20 GPIO_ACTIVE_HIGH>;
output-high;
--
2.34.1
