On Tue, Jul 30, 2024 at 10:20 PM Bjorn Andersson <andersson@xxxxxxxxxx> wrote: > > The USB multiport controller found in SC8180X is used to driver the > camera in the Lenovo Flex 5G, and a couple of additional USB ports on > the Primus AUX board. > > --- > Changes in v2: > - Moved mp index last in DT labels > - Dropped applied PHY patches, and sent dwc3 binding update separately > - Spelled out GPIO_ACTIVE_HIGH as necessary > - Moved status last in a few nodes > - Corrected MP_PHY_PIPE_1_CLK > - Link to v1: https://lore.kernel.org/r/20240525-sc8180x-usb-mp-v1-0-60a904392438@xxxxxxxxxxx > > --- > Bjorn Andersson (7): > dt-bindings: clock: qcom: Add missing USB MP resets > clk: qcom: gcc-sc8180x: Add missing USB MP resets > arm64: dts: qcom: sc8180x-pmics: Add second PMC8180 GPIO > arm64: dts: qcom: sc8180x: Align USB nodes with binding > arm64: dts: qcom: sc8180x: Add USB MP controller and phys > arm64: dts: qcom: sc8180x-primus: Enable the two MP USB ports > arm64: dts: qcom: sc8180x-lenovo-flex-5g: Enable USB multiport controller > > .../arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts | 34 ++++ > arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi | 16 +- > arch/arm64/boot/dts/qcom/sc8180x-primus.dts | 60 +++++++ > arch/arm64/boot/dts/qcom/sc8180x.dtsi | 181 +++++++++++++++++++-- > drivers/clk/qcom/gcc-sc8180x.c | 4 + > include/dt-bindings/clock/qcom,gcc-sc8180x.h | 4 + > 6 files changed, 285 insertions(+), 14 deletions(-) > --- > base-commit: 668d33c9ff922c4590c58754ab064aaf53c387dd > change-id: 20240524-sc8180x-usb-mp-4eb278df7ef1 > > Best regards, > -- > Bjorn Andersson <quic_bjorande@xxxxxxxxxxx> > > Tested here on the Lenovo Flex 5G with Cheese 44.1-1+b4 in Gnome 46, have a working webcam, can record videos, and take pictures without issue, and the webcam shows up as Bus 001 Device 002: ID 13d3:5419 IMC Network Integrated Camera Tested-by: Steev Klimaszewski <steev@xxxxxxxx>
