Add child node 'port' to allow connect to usb controller to do role-switch.
Fix below warning:
arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dtb: typec@3d: 'port' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/extcon/extcon-ptn5150.yaml
Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
---
Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml b/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml
index d5cfa32ea52dd..28c34d78708cb 100644
--- a/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml
+++ b/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml
@@ -37,6 +37,11 @@ properties:
GPIO pin (output) used to control VBUS. If skipped, no such control
takes place.
+ port:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ A port node to link the usb controller for the dual role switch.
+
required:
- compatible
- interrupts
--
2.34.1
