Convert binding doc extcon-usb-gpio.txt to yaml format to fix below
warning:
arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dtb: /extcon-usb0:
failed to match any schema with compatible: ['linux,extcon-usb-gpio']
Additional change:
- rename id-gpio to id-gpios
- rename vbus-gpio to vbus-gpios
Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
---
.../bindings/extcon/extcon-usb-gpio.txt | 21 ----------
.../extcon/linux,extcon-usb-gpio.yaml | 38 +++++++++++++++++++
2 files changed, 38 insertions(+), 21 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt
create mode 100644 Documentation/devicetree/bindings/extcon/linux,extcon-usb-gpio.yaml
diff --git a/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt b/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt
deleted file mode 100644
index dfc14f71e81fb..0000000000000
--- a/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-USB GPIO Extcon device
-
-This is a virtual device used to generate USB cable states from the USB ID pin
-connected to a GPIO pin.
-
-Required properties:
-- compatible: Should be "linux,extcon-usb-gpio"
-
-Either one of id-gpio or vbus-gpio must be present. Both can be present as well.
-- id-gpio: gpio for USB ID pin. See gpio binding.
-- vbus-gpio: gpio for USB VBUS pin.
-
-Example: Examples of extcon-usb-gpio node in dra7-evm.dts as listed below:
- extcon_usb1 {
- compatible = "linux,extcon-usb-gpio";
- id-gpio = <&gpio6 1 GPIO_ACTIVE_HIGH>;
- }
-
- &omap_dwc3_1 {
- extcon = <&extcon_usb1>;
- };
diff --git a/Documentation/devicetree/bindings/extcon/linux,extcon-usb-gpio.yaml b/Documentation/devicetree/bindings/extcon/linux,extcon-usb-gpio.yaml
new file mode 100644
index 0000000000000..1caf58c297d34
--- /dev/null
+++ b/Documentation/devicetree/bindings/extcon/linux,extcon-usb-gpio.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/extcon/linux,extcon-usb-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: USB GPIO Extcon device
+
+maintainers:
+ - Frank Li <Frank.Li@xxxxxxx>
+
+description:
+ This is a virtual device used to generate USB cable states from the USB ID pin
+ connected to a GPIO pin.
+
+properties:
+ compatible:
+ const: linux,extcon-usb-gpio
+
+ id-gpios:
+ description: gpio for USB ID pin. See gpio binding.
+ vbus-gpios:
+ description: gpio for USB VBUS pin.
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ extcon_usb1 {
+ compatible = "linux,extcon-usb-gpio";
+ id-gpios = <&gpio6 1 GPIO_ACTIVE_HIGH>;
+ };
+
--
2.34.1
