On Mon, Aug 12, 2024 at 11:29:38AM -0600, Rob Herring wrote:
> On Fri, Aug 9, 2024 at 11:11 AM Frank Li <Frank.li@xxxxxxx> wrote:
> >
> > On Fri, Aug 09, 2024 at 04:07:25PM +0100, Conor Dooley wrote:
> > > On Thu, Aug 08, 2024 at 12:15:03PM -0400, Frank Li wrote:
> > > > On Thu, Aug 08, 2024 at 04:55:14PM +0100, Conor Dooley wrote:
> > > > > On Thu, Aug 08, 2024 at 11:51:34AM -0400, Frank Li wrote:
> > > > > > On Thu, Aug 08, 2024 at 04:34:32PM +0100, Conor Dooley wrote:
> > > > > > > On Thu, Aug 08, 2024 at 11:31:20AM -0400, Frank Li wrote:
> > > > > > > > The mass production lx2160 rev2 use designware PCIe Controller. Old Rev1
> > > > > > > > which use mobivel PCIe controller was not supported. Although uboot
> > > > > > > > fixup can change compatible string fsl,lx2160a-pcie to fsl,ls2088a-pcie
> > > > > > > > since 2019, it is quite confused and should correctly reflect hardware
> > > > > > > > status in fsl-lx2160a.dtsi.
> > > > > > >
> > > > > > > This does not begin to explain why removing the soc-specific compatible,
> > > > > > > and instead putting the compatible for another soc is the right fix.
> > > > > > > Come up with a new compatible for this device, that perhaps falls back
> > > > > > > to the ls2088a, but this change doesn't seem right to me.
> > > > > >
> > > > > > It can't fallback to fsl,ls2088a-pcie if fsl,lx2160a-pcie exist, which are
> > > > > > totally imcompatible between fsl,ls2088a-pcie and fsl,lx2160a-pcie.
> > > > > >
> > > > > > Previous dtb can work just because uboot dynamtic change fsl,lx2160a-pcie
> > > > > > to fsl,ls2088a-pcie when boot kernel.
> > > > > >
> > > > > > fsl,lx2160a-pcie should be removed because Rev1 have not mass productioned.
> > > > >
> > > > > Please re-read what I wrote. I said to come up with a new compatible for
> > > > > this device, not fall back from the existing fsl,lx2160a-pcie to
> > > > > fsl,ls2088a-pcie.
> > > >
> > > > According to my understand, It needn't add new compatible string if nothing
> > > > difference. for example, it use fsl,vf610-i2c for all i2c without add
> > > > new soc-specific fsl,lx2160-i2c.
> > >
> > > No, you should have soc-specific compatibles regardless. Just because
> > > you got away with it once, doesn't mean I'm not going to complain about
> > > it here!
> >
> > Rob:
> > What's current policy for this? Not only for this one. If new SOC
> > appear such as iMX10 (maybe many derived chip i.MX101, i.MX102...), there
> > are bunch of IPs, Do we need add fsl,imx10* for everyone, which most part
> > is exactly the same as old one and bloat binding doc.
>
> Yes, you do. Do you really know that something in the design hasn't
> changed? Have you compared the RTL between the versions? The only way
> to deal with quirks without changing the DT everytime is by having
> specific compatibles *upfront*.
>
> The "bloat" is never that much because the IP really always changes.
> QCom wanted to (and did) use IP version numbers for the same reasons.
> Guess what, the IP version number changed on almost every SoC.
It is quite dependent on IP itself. Some IP (such as I2C, SPI, UART) is
quite mature. There are not user visual change in difference SOC. for
example in drivers/pci/controller/dwc/pci-layerscape.c:
static const struct of_device_id ls_pcie_of_match[] = {
{ .compatible = "fsl,ls1012a-pcie", .data = &layerscape_drvdata },
{ .compatible = "fsl,ls1021a-pcie", .data = &ls1021a_drvdata },
{ .compatible = "fsl,ls1028a-pcie", .data = &layerscape_drvdata },
{ .compatible = "fsl,ls1043a-pcie", .data = &ls1043a_drvdata },
{ .compatible = "fsl,ls1046a-pcie", .data = &layerscape_drvdata },
{ .compatible = "fsl,ls2080a-pcie", .data = &layerscape_drvdata },
{ .compatible = "fsl,ls2085a-pcie", .data = &layerscape_drvdata },
{ .compatible = "fsl,ls2088a-pcie", .data = &layerscape_drvdata },
{ .compatible = "fsl,ls1088a-pcie", .data = &layerscape_drvdata },
Only 1021 and 1043 have difference, others just copy layerscape_drvdata.
I met similar case in many other drivers.
Can we consider just add new compatible string only when visualable change
happen?
I am confused that some use old SOC compatible string directly, some add
new SOC compatible without any actual change.
>
> The exceptions are really if different SoCs are just different
> packaging or fusing.
>
I see.
>
> In this case, I'm inclined to say just match what u-boot creates, but
> please make that abundantly clear with a comment in the .dts file and
> explain the situation in the commit message. OTOH, just adding a new
> "fsl,lx2160a-dw-pcie" compatible with "fsl,ls2088a-pcie" fallback
> doesn't hurt, and we can just move on from creating a special case.
It is small problem.
In https://lore.kernel.org/all/CAOesGMhz8PYNG_bgMX-6gka77k1hJOZUv6xqJRqATaJ6mFbk6A@xxxxxxxxxxxxxx/
There are still small number user use ver1 even NXP not support Rev1.
According to my best knowledge, rev1 never mass producetion, only few out
of NXP to do evaluation.
I may need create rev1 overlay dtb for old chip and default use rev2.
Frank
>
> Rob
