Hi Prabhakar,
> -----Original Message-----
> From: Lad, Prabhakar <prabhakar.csengg@xxxxxxxxx>
> Sent: Monday, August 12, 2024 1:29 PM
> Subject: Re: [PATCH v2 7/8] arm64: dts: renesas: r9a09g057h44-gp-evk: Enable OSTM, I2C, and SDHI
>
> Hi Biju,
>
> On Mon, Aug 12, 2024 at 11:02 AM Biju Das <biju.das.jz@xxxxxxxxxxxxxx> wrote:
> >
> > Hi Prabhakar,
> >
> > > -----Original Message-----
> > > From: Lad, Prabhakar <prabhakar.csengg@xxxxxxxxx>
> > > Sent: Monday, August 12, 2024 10:16 AM
> > > Subject: Re: [PATCH v2 7/8] arm64: dts: renesas:
> > > r9a09g057h44-gp-evk: Enable OSTM, I2C, and SDHI
> > >
> > > Hi Biju,
> > >
> > > On Mon, Aug 12, 2024 at 8:40 AM Biju Das <biju.das.jz@xxxxxxxxxxxxxx> wrote:
> > > >
> > > > Hi Prabhakar,
> > > >
> > > > Thanks for the patch.
> > > >
> > > > > -----Original Message-----
> > > > > From: Prabhakar <prabhakar.csengg@xxxxxxxxx>
> > > > > Sent: Sunday, August 11, 2024 9:50 PM
> > > > > Subject: [PATCH v2 7/8] arm64: dts: renesas: r9a09g057h44-gp-evk:
> > > > > Enable OSTM, I2C, and SDHI
> > > > >
> > > > > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> > > > >
> > > > > Enable OSTM0-OSTM7, RIIC{0,1,2,3,6,7,8}, and SDHI1 (available on
> > > > > the
> > > > > SD2
> > > > > connector) on the RZ/V2H GP-EVK platform.
> > > > >
> > > > > Signed-off-by: Lad Prabhakar
> > > > > <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> > > > > ---
> > > > > v1->v2
> > > > > - New patch
> > > > > ---
> > > > > .../boot/dts/renesas/r9a09g057h44-gp-evk.dts | 191
> > > > > ++++++++++++++++++
> > > > > 1 file changed, 191 insertions(+)
> > > > >
> > > > > diff --git a/arch/arm64/boot/dts/renesas/r9a09g057h44-gp-evk.dts
> > > > > b/arch/arm64/boot/dts/renesas/r9a09g057h44-gp-evk.dts
> > > > > index 593c48181248..11c13c85d278 100644
> > > > > --- a/arch/arm64/boot/dts/renesas/r9a09g057h44-gp-evk.dts
> > > > > +++ b/arch/arm64/boot/dts/renesas/r9a09g057h44-gp-evk.dts
> > > > > @@ -7,6 +7,8 @@
> > > > >
> > > > > /dts-v1/;
> > > > >
> > > > > +#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
> > > > > +#include <dt-bindings/gpio/gpio.h>
> > > > > #include "r9a09g057.dtsi"
> > > > >
> > > > > / {
> > > > > @@ -14,6 +16,14 @@ / {
> > > > > compatible = "renesas,gp-evk", "renesas,r9a09g057h44",
> > > > > "renesas,r9a09g057";
> > > > >
> > > > > aliases {
> > > > > + i2c0 = &i2c0;
> > > > > + i2c1 = &i2c1;
> > > > > + i2c2 = &i2c2;
> > > > > + i2c3 = &i2c3;
> > > > > + i2c6 = &i2c6;
> > > > > + i2c7 = &i2c7;
> > > > > + i2c8 = &i2c8;
> > > > > + mmc1 = &sdhi1;
> > > > > serial0 = &scif;
> > > > > };
> > > > >
> > > > > @@ -32,17 +42,186 @@ memory@240000000 {
> > > > > device_type = "memory";
> > > > > reg = <0x2 0x40000000 0x2 0x00000000>;
> > > > > };
> > > > > +
> > > > > + reg_3p3v: regulator1 {
> > > > > + compatible = "regulator-fixed";
> > > > > +
> > > > > + regulator-name = "fixed-3.3V";
> > > > > + regulator-min-microvolt = <3300000>;
> > > > > + regulator-max-microvolt = <3300000>;
> > > > > + regulator-boot-on;
> > > > > + regulator-always-on;
> > > > > + };
> > > > > +
> > > > > + vqmmc_sdhi1: regulator-vccq-sdhi1 {
> > > > > + compatible = "regulator-gpio";
> > > > > + regulator-name = "SDHI1 VccQ";
> > > > > + gpios = <&pinctrl RZG2L_GPIO(10, 2) GPIO_ACTIVE_HIGH>;
> > > > > + regulator-min-microvolt = <1800000>;
> > > > > + regulator-max-microvolt = <3300000>;
> > > > > + gpios-states = <0>;
> > > > > + states = <3300000 0>, <1800000 1>;
> > > > > + };
> > > > > };
> > > > >
> > > > > &audio_extal_clk {
> > > > > clock-frequency = <22579200>; };
> > > > >
> > > > > +&i2c0 {
> > > > > + pinctrl-0 = <&i2c0_pins>;
> > > > > + pinctrl-names = "default";
> > > > > +
> > > > > + status = "okay";
> > > > > +};
> > > > > +
> > > >
> > > > clock-frequency = <100000>; in SoC dtsim
> > > >
> > > > Why frequency set to 100kHz for all the i2c nodes even though SoC
> > > > supports Transfer rate up to 1MHz? Is it board limitation restricting to 100kHz?
> > > >
> > > This is due to driver limitation, once driver support for FM+ gets
> > > accepted [0] I plan to update the default frequency to !MHz in SoC DTSI.
> >
> > If there os no board limitation, please update to 400kHz, that is the next best frequency.
> >
> I'll let Geert take a call on this as anyway the once the patch [0] will be merged we will update
> frequency to 1MHz.
OK. Please make sure you don't set 1MHz for some devices like OV5645 which has a max transfer speed 400kHz.
Cheers,
Biju
>
> > > [0]
> > > https://patchwork.kernel.org/project/linux-renesas-soc/patch/2024071
> > > 1115207.2843133-9-
> > > claudiu.beznea.uj@xxxxxxxxxxxxxx/
> > >
> Cheers,
> Prabhakar
