On Mon, 12 Aug 2024 14:05:26 +0200, Christian Bruel wrote: > Document the bindings for STM32 COMBOPHY interface, used to support > the PCIe and USB3 stm32mp25 drivers. > Following entries can be used to tune caracterisation parameters > - st,output-micro-ohms and st,output-vswing-microvolt bindings entries > to tune the impedance and voltage swing using discrete simulation results > - st, phy_rx0_eq register to set the internal rx equalizer filter value. > > Signed-off-by: Christian Bruel <christian.bruel@xxxxxxxxxxx> > --- > .../bindings/phy/st,stm32-combophy.yaml | 178 ++++++++++++++++++ > 1 file changed, 178 insertions(+) > create mode 100644 Documentation/devicetree/bindings/phy/st,stm32-combophy.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/phy/st,stm32-combophy.yaml: access-controllers: missing type definition doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240812120529.3564390-3-christian.bruel@xxxxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
