Re: [PATCH] ARM: dts: imx6dl-yapp43: Increase LED current to match the yapp4 HW design

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jul 23, 2024 at 04:25:19PM +0200, Michal Vokáč wrote:
> On the imx6dl-yapp4 revision based boards, the RGB LED is not driven
> directly by the LP5562 driver but through FET transistors. Hence the LED
> current is not determined by the driver but by the LED series resistors.
> 
> On the imx6dl-yapp43 revision based boards, we removed the FET transistors
> to drive the LED directly from the LP5562 but forgot to tune the output
> current to match the previous HW design.
> 
> Set the LED current on imx6dl-yapp43 based boards to the same values
> measured on the imx6dl-yapp4 boards and limit the maximum current to 20mA.
> 
> Fixes: 7da4734751e0 ("ARM: dts: imx6dl-yapp43: Add support for new HW revision of the IOTA board")
> Cc: <stable@xxxxxxxxxxxxxxx>
> Signed-off-by: Michal Vokáč <michal.vokac@xxxxxxxxx>

Applied, thanks!





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux