Hi Andrew, On 11/08/24 9:39 pm, Andrew Lunn wrote: > EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe > > On Tue, Jul 30, 2024 at 09:39:05AM +0530, Parthiban Veerasooran wrote: >> The LAN8650/1 is designed to conform to the OPEN Alliance 10BASE-T1x >> MAC-PHY Serial Interface specification, Version 1.1. The IEEE Clause 4 >> MAC integration provides the low pin count standard SPI interface to any >> microcontroller therefore providing Ethernet functionality without >> requiring MAC integration within the microcontroller. The LAN8650/1 >> operates as an SPI client supporting SCLK clock rates up to a maximum of >> 25 MHz. This SPI interface supports the transfer of both data (Ethernet >> frames) and control (register access). >> >> By default, the chunk data payload is 64 bytes in size. The Ethernet >> Media Access Controller (MAC) module implements a 10 Mbps half duplex >> Ethernet MAC, compatible with the IEEE 802.3 standard. 10BASE-T1S >> physical layer transceiver integrated is into the LAN8650/1. The PHY and >> MAC are connected via an internal Media Independent Interface (MII). > > I see there are some fixes needed for Multicast, but otherwise this > looks O.K. Sure, will fix them. > > Please send a new version with the fixes, and then i think we are > ready for this to be merged. O.K. Thanks a lot Andrew for reviewing all the patches. I will fix the above patch and send v6 patch series now. Best regards, Parthiban V > > Andrew > >
