[PATCH net-next v4 1/5] dt-bindings: net: dsa: microchip: add microchip,pme-active-high flag

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Pieter Van Trappen <pieter.van.trappen@xxxxxxx>

Add microchip,pme-active-high property to set the PME (Power
Management Event) pin polarity for Wake on Lan interrupts.

Note that the polarity is active-low by default.

Signed-off-by: Pieter Van Trappen <pieter.van.trappen@xxxxxxx>
Reviewed-by: Rob Herring (Arm) <robh@xxxxxxxxxx>
Reviewed-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
---
 Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
index 52acc15ebcbf..c589ebc2c7be 100644
--- a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
@@ -51,6 +51,11 @@ properties:
       Set if the output SYNCLKO clock should be disabled. Do not mix with
       microchip,synclko-125.
 
+  microchip,pme-active-high:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Indicates if the PME pin polarity is active-high.
+
   microchip,io-drive-strength-microamp:
     description:
       IO Pad Drive Strength
-- 
2.43.0





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux