On Sat, 10 Aug 2024 16:38:53 +0800, Inochi Amaoto wrote: > The DMA IP of Sophgo CV18XX/SG200X is based on a DW AXI CORE, with > an additional channel remap register located in the top system control > area. The DMA channel is exclusive to each core. > > In addition, the DMA multiplexer is a subdevice of system controller, > so this binding only contains necessary properties for the multiplexer > itself. > > Add the dmamux binding for CV18XX/SG200X series SoC. > > Signed-off-by: Inochi Amaoto <inochiama@xxxxxxxxxxx> > --- > .../bindings/dma/sophgo,cv1800b-dmamux.yaml | 51 +++++++++++++++++++ > 1 file changed, 51 insertions(+) > create mode 100644 Documentation/devicetree/bindings/dma/sophgo,cv1800b-dmamux.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/dma/sophgo,cv1800b-dmamux.yaml: $id: Cannot determine base path from $id, relative path/filename doesn't match actual path or filename $id: http://devicetree.org/schemas/dma/sophgo,cv1800-dmamux.yaml file: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/dma/sophgo,cv1800b-dmamux.yaml doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/IA1PR20MB4953DBA230FF57B2F78F7283BBBB2@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
