From: Clément Léger <clement.leger@xxxxxxxxxxx> This reset controller can be used by the LAN966x PCI device. The LAN966x PCI device driver can be built as a module and this reset controller driver has no reason to be a builtin driver in that case. Signed-off-by: Clément Léger <clement.leger@xxxxxxxxxxx> Signed-off-by: Herve Codina <herve.codina@xxxxxxxxxxx> Reviewed-by: Steen Hegelund <Steen.Hegelund@xxxxxxxxxxxxx> --- drivers/reset/Kconfig | 2 +- drivers/reset/reset-microchip-sparx5.c | 2 ++ 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig index 5b5a4d99616e..88350aa8a51c 100644 --- a/drivers/reset/Kconfig +++ b/drivers/reset/Kconfig @@ -133,7 +133,7 @@ config RESET_LPC18XX This enables the reset controller driver for NXP LPC18xx/43xx SoCs. config RESET_MCHP_SPARX5 - bool "Microchip Sparx5 reset driver" + tristate "Microchip Sparx5 reset driver" depends on ARCH_SPARX5 || SOC_LAN966 || MCHP_LAN966X_PCI || COMPILE_TEST default y if SPARX5_SWITCH select MFD_SYSCON diff --git a/drivers/reset/reset-microchip-sparx5.c b/drivers/reset/reset-microchip-sparx5.c index 636e85c388b0..69915c7b4941 100644 --- a/drivers/reset/reset-microchip-sparx5.c +++ b/drivers/reset/reset-microchip-sparx5.c @@ -158,6 +158,7 @@ static const struct of_device_id mchp_sparx5_reset_of_match[] = { }, { } }; +MODULE_DEVICE_TABLE(of, mchp_sparx5_reset_of_match); static struct platform_driver mchp_sparx5_reset_driver = { .probe = mchp_sparx5_reset_probe, @@ -180,3 +181,4 @@ postcore_initcall(mchp_sparx5_reset_init); MODULE_DESCRIPTION("Microchip Sparx5 switch reset driver"); MODULE_AUTHOR("Steen Hegelund <steen.hegelund@xxxxxxxxxxxxx>"); +MODULE_LICENSE("GPL"); -- 2.45.0