[PATCH v2 2/2] dmaengine: zynqmp_dma: Add support for AMD Versal Gen 2 DMA IP

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



ZynqMP DMA IP and AMD Versal Gen 2 DMA IP are similar but have different
interrupt register offset. Create a dedicated compatible string to
support Versal Gen 2 DMA IP with Irq register offset for interrupt
Enable/Disable/Status/Mask functionality.

Signed-off-by: Abin Joseph <abin.joseph@xxxxxxx>
---

Changes in v2:
- Update the logic to use of_device_get_match_data
instead of of_device_is_compatible.
- Use lower case hexa decimal value for macros.

---
 drivers/dma/xilinx/zynqmp_dma.c | 27 +++++++++++++++++++++++----
 1 file changed, 23 insertions(+), 4 deletions(-)

diff --git a/drivers/dma/xilinx/zynqmp_dma.c b/drivers/dma/xilinx/zynqmp_dma.c
index f31631bef961..9ae46f1198fe 100644
--- a/drivers/dma/xilinx/zynqmp_dma.c
+++ b/drivers/dma/xilinx/zynqmp_dma.c
@@ -22,10 +22,10 @@
 #include "../dmaengine.h"
 
 /* Register Offsets */
-#define ZYNQMP_DMA_ISR			0x100
-#define ZYNQMP_DMA_IMR			0x104
-#define ZYNQMP_DMA_IER			0x108
-#define ZYNQMP_DMA_IDS			0x10C
+#define ZYNQMP_DMA_ISR			(chan->irq_offset + 0x100)
+#define ZYNQMP_DMA_IMR			(chan->irq_offset + 0x104)
+#define ZYNQMP_DMA_IER			(chan->irq_offset + 0x108)
+#define ZYNQMP_DMA_IDS			(chan->irq_offset + 0x10c)
 #define ZYNQMP_DMA_CTRL0		0x110
 #define ZYNQMP_DMA_CTRL1		0x114
 #define ZYNQMP_DMA_DATA_ATTR		0x120
@@ -145,6 +145,9 @@
 #define tx_to_desc(tx)		container_of(tx, struct zynqmp_dma_desc_sw, \
 					     async_tx)
 
+/* IRQ Register offset for Versal Gen 2 */
+#define IRQ_REG_OFFSET			0x308
+
 /**
  * struct zynqmp_dma_desc_ll - Hw linked list descriptor
  * @addr: Buffer address
@@ -211,6 +214,7 @@ struct zynqmp_dma_desc_sw {
  * @bus_width: Bus width
  * @src_burst_len: Source burst length
  * @dst_burst_len: Dest burst length
+ * @irq_offset: Irq register offset
  */
 struct zynqmp_dma_chan {
 	struct zynqmp_dma_device *zdev;
@@ -235,6 +239,7 @@ struct zynqmp_dma_chan {
 	u32 bus_width;
 	u32 src_burst_len;
 	u32 dst_burst_len;
+	u32 irq_offset;
 };
 
 /**
@@ -253,6 +258,14 @@ struct zynqmp_dma_device {
 	struct clk *clk_apb;
 };
 
+struct zynqmp_dma_config {
+	u32 offset;
+};
+
+static const struct zynqmp_dma_config versal2_dma_config = {
+	.offset = IRQ_REG_OFFSET,
+};
+
 static inline void zynqmp_dma_writeq(struct zynqmp_dma_chan *chan, u32 reg,
 				     u64 value)
 {
@@ -892,6 +905,7 @@ static int zynqmp_dma_chan_probe(struct zynqmp_dma_device *zdev,
 {
 	struct zynqmp_dma_chan *chan;
 	struct device_node *node = pdev->dev.of_node;
+	const struct zynqmp_dma_config *match_data;
 	int err;
 
 	chan = devm_kzalloc(zdev->dev, sizeof(*chan), GFP_KERNEL);
@@ -919,6 +933,10 @@ static int zynqmp_dma_chan_probe(struct zynqmp_dma_device *zdev,
 		return -EINVAL;
 	}
 
+	match_data = of_device_get_match_data(&pdev->dev);
+	if (match_data)
+		chan->irq_offset = match_data->offset;
+
 	chan->is_dmacoherent =  of_property_read_bool(node, "dma-coherent");
 	zdev->chan = chan;
 	tasklet_setup(&chan->tasklet, zynqmp_dma_do_tasklet);
@@ -1161,6 +1179,7 @@ static void zynqmp_dma_remove(struct platform_device *pdev)
 }
 
 static const struct of_device_id zynqmp_dma_of_match[] = {
+	{ .compatible = "amd,versal2-dma-1.0", .data = &versal2_dma_config },
 	{ .compatible = "xlnx,zynqmp-dma-1.0", },
 	{}
 };
-- 
2.34.1





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux