Hi Bhavya
On 08/08/24 13:08, Bhavya Kapoor wrote:
Hi Neha,
On 08/08/24 11:51 am, Neha Malcom Francis wrote:
Hi Bhavya
On 07/08/24 15:46, Bhavya Kapoor wrote:
mmc1 was not functional since pin mux for clklb was not present.
Thus, add clklb pin mux to get MMC working.
Fixes: a266c180b398 ("arm64: dts: ti: k3-am68-sk: Add support for AM68 SK
base board")
Signed-off-by: Bhavya Kapoor <b-kapoor@xxxxxx>
---
rebased to next-20240807
arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
index 90dbe31c5b81..d5ceab79536c 100644
--- a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
@@ -204,6 +204,7 @@ main_mmc1_pins_default: main-mmc1-default-pins {
pinctrl-single,pins = <
J721S2_IOPAD(0x104, PIN_INPUT, 0) /* (P23) MMC1_CLK */
J721S2_IOPAD(0x108, PIN_INPUT, 0) /* (N24) MMC1_CMD */
+ J721S2_IOPAD(0x100, PIN_INPUT, 0) /* (###) MMC1_CLKLB */
J721S2_IOPAD(0x0fc, PIN_INPUT, 0) /* (M23) MMC1_DAT0 */
J721S2_IOPAD(0x0f8, PIN_INPUT, 0) /* (P24) MMC1_DAT1 */
J721S2_IOPAD(0x0f4, PIN_INPUT, 0) /* (R24) MMC1_DAT2 */
How is this different from the P23 pinmux for MMC1_CLK? Could you explain what
CLKLB is, since it doesn't have a ball number I'm finding it difficult to
understand what it is?
This pin needs to be setup so that MMC_CLK is looped back at pad level for
highspeed SDIO operations (has been same across K3 family). MMC0/1 has this pin
configured as INPUT by reset default as these have boot media
These pinmuxes are derived from pinmux file shared by EVM team during
wakeup/board bringup.
Thank you for explaining.
Reviewed-by: Neha Malcom Francis <n-francis@xxxxxx>
Regards
--
Thanking You
Neha Malcom Francis
