Re: [PATCH v6 3/3] ARM: dts: vf610: add Miscellaneous System Control Module (MSCM)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Wed, Mar 11, 2015 at 08:48:15AM +0800, Shawn Guo wrote:
> On Sun, Mar 01, 2015 at 11:41:29PM +0100, Stefan Agner wrote:
> > Add the Miscellaneous System Control Module (MSCM) to the base
> > device tree for Vybrid SoC's. This module contains registers
> > to get information of the individual and current (accessing)
> > CPU. In a second block, there is an interrupt router, which
> > handles the routing of the interrupts between the two CPU cores
> > on VF6xx variants of the SoC. However, also on single core
> > variants the interrupt router needs to be configured in order
> > to receive interrupts on the CPU's interrupt controller. Almost
> > all peripheral interrupts are routed through the router, hence
> > the MSCM module is the default interrupt parent for this SoC.
> > 
> > In a earlier commit the interrupt nodes were moved out of the
> > peripheral nodes and specified in the CPU specific vf500.dtsi
> > device tree. This allowed to use the base device tree vfxxx.dtsi
> > also for a Cortex-M4 specific device tree, which uses different
> > interrupt nodes due to the NVIC interrupt controller. However,
> > since the interrupt parent for peripherals is the MSCM module
> > independently which CPU the device tree is used for, we can move
> > the interrupt nodes into the base device tree vfxxx.dtsi again.
> > Depending on which CPU this base device tree will be used with,
> > the correct parent interrupt controller has to be assigned to
> > the MSCM-IR node (GIC or NVIC). The driver takes care of the
> > parent interrupt controller specific needs (interrupt-cells).
> > 
> > Acked-by: Marc Zyngier <marc.zyngier@xxxxxxx>
> > Signed-off-by: Stefan Agner <stefan@xxxxxxxx>
> 
> Stefan,
> 
> I guess this patch has a run-time dependency on the first two in the
> series, right?  Or put it another way, if I apply this single patch on
> my branch, the dtb and kernel built from the same branch do not work
> together, right?  If so, we will need to either wait for the first two
> hit mainline or pull Jason's irqchip/vybrid branch into my tree as
> prerequisite (irqchip/vybrid needs to be stable).

No problem, I'll only add patches on top of this if needed.  no rebasing.

thx,

Jason.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux