In preparation for dealing with indirect reads and writes towards
certain PHY devices, move the code which deals with binding the PHY
device to the slave MII bus created by DSA to its own function:
dsa_slave_phy_connect().
Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
---
net/dsa/slave.c | 28 ++++++++++++++++++++--------
1 file changed, 20 insertions(+), 8 deletions(-)
diff --git a/net/dsa/slave.c b/net/dsa/slave.c
index a47305c72fcc..19bc2b39c9d1 100644
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -617,6 +617,23 @@ static int dsa_slave_fixed_link_update(struct net_device *dev,
}
/* slave device setup *******************************************************/
+static int dsa_slave_phy_connect(struct dsa_slave_priv *p,
+ struct net_device *slave_dev)
+{
+ struct dsa_switch *ds = p->parent;
+
+ p->phy = ds->slave_mii_bus->phy_map[p->port];
+ if (!p->phy)
+ return -ENODEV;
+
+ /* Use already configured phy mode */
+ p->phy_interface = p->phy->interface;
+ phy_connect_direct(slave_dev, p->phy, dsa_slave_adjust_link,
+ p->phy_interface);
+
+ return 0;
+}
+
static int dsa_slave_phy_setup(struct dsa_slave_priv *p,
struct net_device *slave_dev)
{
@@ -662,14 +679,9 @@ static int dsa_slave_phy_setup(struct dsa_slave_priv *p,
* MDIO bus instead
*/
if (!p->phy) {
- p->phy = ds->slave_mii_bus->phy_map[p->port];
- if (!p->phy)
- return -ENODEV;
-
- /* Use already configured phy mode */
- p->phy_interface = p->phy->interface;
- phy_connect_direct(slave_dev, p->phy, dsa_slave_adjust_link,
- p->phy_interface);
+ ret = dsa_slave_phy_connect(p, slave_dev);
+ if (ret)
+ return ret;
} else {
netdev_info(slave_dev, "attached PHY at address %d [%s]\n",
p->phy->addr, p->phy->drv->name);
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
