Re: [PATCH 0/6] Update the device tree for Ampere's BMC platform

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, 2024-08-03 at 10:49 +0700, Chanh Nguyen wrote:
> 
> On 01/08/2024 22:29, Rob Herring (Arm) wrote:
> > 
> > On Thu, 01 Aug 2024 09:12:10 +0000, Chanh Nguyen wrote:
> > > Updates the device tree to support some features on Ampere's
> > > Mt.Mitchell BMC and Ampere's Mt.Jade BMC.
> > > 
> > > Chanh Nguyen (6):
> > >    ARM: dts: aspeed: mtjade, mtmitchell: Add OCP temperature sensors
> > >    ARM: dts: aspeed: mtmitchell: Add I2C temperature sensor alias ports
> > >    ARM: dts: aspeed: mtmitchell: Add I2C Riser card alias ports
> > >    ARM: dts: aspeed: mtmitchell: Enable i2c10 and i2c15
> > >    ARM: dts: aspeed: mtmitchell: Add LEDs
> > >    ARM: dts: aspeed: mtmitchell: Add I2C FAN controllers
> > > 
> > >   .../dts/aspeed/aspeed-bmc-ampere-mtjade.dts   |  16 ++
> > >   .../aspeed/aspeed-bmc-ampere-mtmitchell.dts   | 152 ++++++++++++++++++
> > >   2 files changed, 168 insertions(+)
> > > 
> > > --
> > > 2.43.0
> > > 
> > > 
> > > 
> > 
> > 
> > My bot found new DTB warnings on the .dts files added or changed in this
> > series.
> > 
> > Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
> > are fixed by another series. Ultimately, it is up to the platform
> > maintainer whether these warnings are acceptable or not. No need to reply
> > unless the platform maintainer has comments.
> > 
> > If you already ran DT checks and didn't see these error(s), then
> > make sure dt-schema is up to date:
> > 
> >    pip3 install dtschema --upgrade
> > 
> > 
> > New warnings running 'make CHECK_DTBS=y aspeed/aspeed-bmc-ampere-mtjade.dtb aspeed/aspeed-bmc-ampere-mtmitchell.dtb' for 20240801091217.1408809-1-chanh@xxxxxxxxxxxxxxxxxxxxxx:
> > 
> > arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dtb: /ahb/apb/bus@1e78a000/i2c@480/fan-controller0@20: failed to match any schema with compatible: ['maxim,max31790']
> > arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dtb: /ahb/apb/bus@1e78a000/i2c@480/fan-controller1@2f: failed to match any schema with compatible: ['maxim,max31790']
> > 
> > 
> 
> Thank Rob for your review!
> 
> I am aware of the new warnings you mentioned. For more information, the 
> schema binding of "maxim,max31790" is being progressed by other series  
> https://lore.kernel.org/lkml/20240414042246.8681-2-chanh@xxxxxxxxxxxxxxxxxxxxxx/ 
> 

For now can you please remove the `maxim,max31790` nodes from your
devicetree and re-send? As it stands you've been asked to rework what
you proposed in the thread that you linked, and a quick look at the
hwmon trees suggests support for the max31790 hasn't been merged.

You can send a follow-up patch adding the nodes to your devicetree once
the binding has been merged.

Andrew





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux