There is a second HDMI connector on the baseboard which is routed
to the DW HDMI bridge through the PVI to the LCDIF3 and requires the
HDMI PHY to be enabled too.
Signed-off-by: Adam Ford <aford173@xxxxxxxxx>
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts b/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts
index cc9b81d46188..bd12420d9fd9 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts
@@ -105,6 +105,17 @@ hdmi_con: endpoint {
};
};
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_connector: endpoint {
+ remote-endpoint = <&hdmi_to_connector>;
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -282,6 +293,24 @@ usb-mux-hog {
};
};
+&hdmi_tx {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hdmi>;
+ status = "okay";
+
+ ports {
+ port@1 {
+ hdmi_to_connector:endpoint {
+ remote-endpoint = <&hdmi_connector>;
+ };
+ };
+ };
+};
+
+&hdmi_tx_phy {
+ status = "okay";
+};
+
&i2c2 {
clock-frequency = <384000>;
pinctrl-names = "default";
@@ -344,6 +373,10 @@ pcieclk: clock-generator@68 {
};
};
+&hdmi_pvi {
+ status = "okay";
+};
+
&i2c3 {
/* Connected to USB Hub */
usb-typec@52 {
@@ -464,6 +497,10 @@ &lcdif1 {
status = "okay";
};
+&lcdif3 {
+ status = "okay";
+};
+
&micfil {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pdm>;
@@ -646,6 +683,15 @@ MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19 0x140
>;
};
+ pinctrl_hdmi: hdmigrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL 0x400001c2
+ MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA 0x400001c2
+ MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD 0x40000010
+ MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC 0x40000010
+ >;
+ };
+
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c2
--
2.43.0
