Add linux device tree entry for Meta(Facebook) Catalina compute-tray
BMC using AT2600 SoC.
Signed-off-by: Potin Lai <potin.lai@xxxxxxxxxxxx>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
arch/arm/boot/dts/aspeed/Makefile | 1 +
.../dts/aspeed/aspeed-bmc-facebook-catalina.dts | 965 +++++++++++++++++++++
2 files changed, 966 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
index e51c6d203725..afdc9f78dd7f 100644
--- a/arch/arm/boot/dts/aspeed/Makefile
+++ b/arch/arm/boot/dts/aspeed/Makefile
@@ -17,6 +17,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-bytedance-g220a.dtb \
aspeed-bmc-delta-ahe50dc.dtb \
aspeed-bmc-facebook-bletchley.dtb \
+ aspeed-bmc-facebook-catalina.dtb \
aspeed-bmc-facebook-cmm.dtb \
aspeed-bmc-facebook-elbert.dtb \
aspeed-bmc-facebook-fuji.dtb \
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
new file mode 100644
index 000000000000..70cec690f541
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
@@ -0,0 +1,965 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2021 Facebook Inc.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/usb/pd.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+ model = "Facebook Catalina BMC";
+ compatible = "facebook,catalina-bmc", "aspeed,ast2600";
+
+ aliases {
+ serial0 = &uart1;
+ serial2 = &uart3;
+ serial3 = &uart4;
+ serial4 = &uart5;
+ i2c16 = &i2c1mux0ch0;
+ i2c17 = &i2c1mux0ch1;
+ i2c18 = &i2c1mux0ch2;
+ i2c19 = &i2c1mux0ch3;
+ i2c20 = &i2c1mux0ch4;
+ i2c21 = &i2c1mux0ch5;
+ i2c22 = &i2c1mux0ch6;
+ i2c23 = &i2c1mux0ch7;
+ i2c24 = &i2c0mux0ch0;
+ i2c25 = &i2c0mux0ch1;
+ i2c26 = &i2c0mux0ch2;
+ i2c27 = &i2c0mux0ch3;
+ i2c28 = &i2c0mux1ch0;
+ i2c29 = &i2c0mux1ch1;
+ i2c30 = &i2c0mux1ch2;
+ i2c31 = &i2c0mux1ch3;
+ i2c32 = &i2c0mux2ch0;
+ i2c33 = &i2c0mux2ch1;
+ i2c34 = &i2c0mux2ch2;
+ i2c35 = &i2c0mux2ch3;
+ i2c36 = &i2c0mux3ch0;
+ i2c37 = &i2c0mux3ch1;
+ i2c38 = &i2c0mux3ch2;
+ i2c39 = &i2c0mux3ch3;
+ i2c40 = &i2c0mux4ch0;
+ i2c41 = &i2c0mux4ch1;
+ i2c42 = &i2c0mux4ch2;
+ i2c43 = &i2c0mux4ch3;
+ i2c44 = &i2c0mux5ch0;
+ i2c45 = &i2c0mux5ch1;
+ i2c46 = &i2c0mux5ch2;
+ i2c47 = &i2c0mux5ch3;
+ i2c48 = &i2c30mux0ch0;
+ i2c49 = &i2c30mux0ch1;
+ i2c50 = &i2c30mux0ch2;
+ i2c51 = &i2c30mux0ch3;
+ i2c52 = &i2c30mux0ch4;
+ i2c53 = &i2c30mux0ch5;
+ i2c54 = &i2c30mux0ch6;
+ i2c55 = &i2c30mux0ch7;
+ };
+
+ chosen {
+ stdout-path = "serial4:57600n8";
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x80000000>;
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+ <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+ <&adc1 2>;
+ };
+
+ spi1_gpio: spi {
+ compatible = "spi-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+ miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+ num-chipselects = <1>;
+
+ tpm@0 {
+ compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+ spi-max-frequency = <33000000>;
+ reg = <0>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ label = "bmc_heartbeat_amber";
+ gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ led-1 {
+ label = "fp_id_amber";
+ default-state = "off";
+ gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+ };
+
+ led-2 {
+ label = "bmc_ready_noled";
+ gpios = <&gpio0 ASPEED_GPIO(B, 3) (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>;
+ };
+
+ led-3 {
+ label = "bmc_ready_cpld_noled";
+ gpios = <&gpio0 ASPEED_GPIO(P, 5) (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>;
+ };
+ };
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&uart4 {
+ status = "okay";
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&mac3 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ncsi4_default>;
+ use-ncsi;
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+ spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+ };
+ flash@1 {
+ status = "okay";
+ m25p,fast-read;
+ label = "alt-bmc";
+ spi-max-frequency = <50000000>;
+ };
+};
+
+&i2c0 {
+ status = "okay";
+
+ i2c-mux@71 {
+ compatible = "nxp,pca9546";
+ reg = <0x71>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c0mux0ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+ i2c0mux0ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ i2c0mux0ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+ i2c0mux0ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+
+ i2c-mux@72 {
+ compatible = "nxp,pca9546";
+ reg = <0x72>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c0mux1ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+ i2c0mux1ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ // IO Mezz 0 IOEXP
+ io_expander7: gpio@20 {
+ compatible = "nxp,pca9535";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // IO Mezz 0 FRU EEPROM
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
+ i2c0mux1ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ i2c-mux@70 {
+ compatible = "nxp,pca9548";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c30mux0ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+ i2c30mux0ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ i2c30mux0ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+ i2c30mux0ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ i2c30mux0ch4: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+ i2c30mux0ch5: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+ i2c30mux0ch6: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ // HDD FRU EEPROM
+ eeprom@52 {
+ compatible = "atmel,24c64";
+ reg = <0x52>;
+ };
+ };
+ i2c30mux0ch7: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+
+ power-sensor@40 {
+ compatible = "ti,ina230";
+ reg = <0x40>;
+ shunt-resistor = <2000>;
+ };
+ power-sensor@41 {
+ compatible = "ti,ina230";
+ reg = <0x41>;
+ shunt-resistor = <2000>;
+ };
+ power-sensor@44 {
+ compatible = "ti,ina230";
+ reg = <0x44>;
+ shunt-resistor = <2000>;
+ };
+ power-sensor@45 {
+ compatible = "ti,ina230";
+ reg = <0x45>;
+ shunt-resistor = <2000>;
+ };
+ };
+ };
+ };
+ i2c0mux1ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+
+ i2c-mux@73 {
+ compatible = "nxp,pca9546";
+ reg = <0x73>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c0mux2ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+ i2c0mux2ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ i2c0mux2ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+ i2c0mux2ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+
+ i2c-mux@75 {
+ compatible = "nxp,pca9546";
+ reg = <0x75>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c0mux3ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+ i2c0mux3ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ i2c0mux3ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+ i2c0mux3ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+
+ i2c-mux@76 {
+ compatible = "nxp,pca9546";
+ reg = <0x76>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c0mux4ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+ i2c0mux4ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ // IO Mezz 1 IOEXP
+ io_expander8: gpio@21 {
+ compatible = "nxp,pca9535";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // IO Mezz 1 FRU EEPROM
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
+ i2c0mux4ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+ i2c0mux4ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+
+ i2c-mux@77 {
+ compatible = "nxp,pca9546";
+ reg = <0x77>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c0mux5ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+ i2c0mux5ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ i2c0mux5ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+ i2c0mux5ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+};
+
+&i2c1 {
+ status = "okay";
+ i2c-mux@70 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+ i2c-mux-idle-disconnect;
+
+ i2c1mux0ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0>;
+
+ power-sensor@41 {
+ compatible = "ti,ina238";
+ reg = <0x41>;
+ shunt-resistor = <500>;
+ };
+ power-sensor@42 {
+ compatible = "ti,ina238";
+ reg = <0x42>;
+ shunt-resistor = <500>;
+ };
+ power-sensor@44 {
+ compatible = "ti,ina238";
+ reg = <0x44>;
+ shunt-resistor = <500>;
+ };
+ };
+ i2c1mux0ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1>;
+
+ power-sensor@41 {
+ compatible = "ti,ina238";
+ reg = <0x41>;
+ };
+ power-sensor@43 {
+ compatible = "ti,ina238";
+ reg = <0x43>;
+ };
+ };
+ i2c1mux0ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x2>;
+ };
+ i2c1mux0ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x3>;
+ };
+ i2c1mux0ch4: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x4>;
+
+ power-monitor@42 {
+ compatible = "lltc,ltc4287";
+ reg = <0x42>;
+ shunt-resistor-micro-ohms = <200>;
+ };
+ power-monitor@43 {
+ compatible = "lltc,ltc4287";
+ reg = <0x43>;
+ shunt-resistor-micro-ohms = <200>;
+ };
+ };
+ i2c1mux0ch5: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x5>;
+
+ // PDB FRU EEPROM
+ eeprom@54 {
+ compatible = "atmel,24c64";
+ reg = <0x54>;
+ };
+
+ // PDB TEMP SENSOR
+ temperature-sensor@4f {
+ compatible = "ti,tmp75";
+ reg = <0x4f>;
+ };
+ };
+ i2c1mux0ch6: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x6>;
+
+ // PDB IOEXP
+ io_expander5: gpio@27 {
+ compatible = "nxp,pca9554";
+ reg = <0x27>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // OSFP IOEXP
+ io_expander6: gpio@25 {
+ compatible = "nxp,pca9555";
+ reg = <0x25>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // OSFP FRU EEPROM
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+ };
+ i2c1mux0ch7: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x7>;
+
+ // FIO FRU EEPROM
+ eeprom@53 {
+ compatible = "atmel,24c64";
+ reg = <0x53>;
+ };
+
+ // FIO TEMP SENSOR
+ temperature-sensor@4b {
+ compatible = "ti,tmp75";
+ reg = <0x4b>;
+ };
+ };
+ };
+};
+
+&i2c2 {
+ status = "okay";
+
+ // Module 0 IOEXP
+ io_expander0: gpio@20 {
+ compatible = "nxp,pca9555";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <ASPEED_GPIO(B, 4) IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ // Module 1 IOEXP
+ io_expander1: gpio@21 {
+ compatible = "nxp,pca9555";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <ASPEED_GPIO(B, 4) IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ // HMC IOEXP
+ io_expander2: gpio@27 {
+ compatible = "nxp,pca9555";
+ reg = <0x27>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <ASPEED_GPIO(B, 4) IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ // Module 0 EEPROM
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ // Module 1 EEPROM
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+};
+
+&i2c3 {
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2c6 {
+ status = "okay";
+
+ // BMC IOEXP on Module 0
+ io_expander3: gpio@21 {
+ compatible = "nxp,pca9555";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ rtc@6f {
+ compatible = "nuvoton,nct3018y";
+ reg = <0x6f>;
+ };
+};
+
+&i2c7 {
+ status = "okay";
+};
+
+&i2c8 {
+ status = "okay";
+};
+
+&i2c9 {
+ status = "okay";
+
+ // SCM CPLD IOEXP
+ io_expander4: gpio@4f {
+ compatible = "nxp,pca9555";
+ reg = <0x4f>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // SCM TEMP SENSOR
+ temperature-sensor@4b {
+ compatible = "ti,tmp75";
+ reg = <0x4b>;
+ };
+
+ // SCM FRU EEPROM
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ // BSM FRU EEPROM
+ eeprom@56 {
+ compatible = "atmel,24c64";
+ reg = <0x56>;
+ };
+};
+
+&i2c10 {
+ status = "okay";
+
+ // OCP NIC0 TEMP
+ temperature-sensor@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+
+ // OCP NIC0 FRU EEPROM
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+};
+
+&i2c11 {
+ status = "okay";
+
+ ssif-bmc@10 {
+ compatible = "ssif-bmc";
+ reg = <0x10>;
+ };
+};
+
+&i2c12 {
+ status = "okay";
+
+ // Module 1 FRU EEPROM
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+};
+
+&i2c13 {
+ status = "okay";
+
+ // Module 0 FRU EEPROM
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ // Left CBC FRU EEPROM
+ eeprom@54 {
+ compatible = "atmel,24c02";
+ reg = <0x54>;
+ };
+
+ // Right CBC FRU EEPROM
+ eeprom@55 {
+ compatible = "atmel,24c02";
+ reg = <0x55>;
+ };
+
+ // HMC FRU EEPROM
+ eeprom@57 {
+ compatible = "atmel,24c02";
+ reg = <0x57>;
+ };
+};
+
+&i2c14 {
+ status = "okay";
+};
+
+&i2c15 {
+ status = "okay";
+
+ // OCP NIC1 TEMP
+ temperature-sensor@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+
+ // OCP NIC1 FRU EEPROM
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+};
+
+&adc0 {
+ vref = <1800>;
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+ &pinctrl_adc2_default &pinctrl_adc3_default
+ &pinctrl_adc4_default &pinctrl_adc5_default
+ &pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+ vref = <2500>;
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc10_default>;
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&wdt1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdtrst1_default>;
+ aspeed,reset-type = "soc";
+ aspeed,external-signal;
+ aspeed,ext-push-pull;
+ aspeed,ext-active-high;
+ aspeed,ext-pulse-duration = <256>;
+};
+
+&pinctrl {
+ pinctrl_ncsi3_default: ncsi3_default {
+ function = "RMII3";
+ groups = "NCSI3";
+ };
+
+ pinctrl_ncsi4_default: ncsi4_default {
+ function = "RMII4";
+ groups = "NCSI4";
+ };
+};
+
+&gpio0 {
+ pinctrl-names = "default";
+
+ gpio-line-names =
+ /*A0-A7*/ "","","","","","","","",
+ /*B0-B7*/ "BATTERY_DETECT","PRSNT1_HPM_SCM_N",
+ "BMC_I2C1_FPGA_ALERT_L","BMC_READY",
+ "IOEXP_INT_L","FM_ID_LED",
+ "","",
+ /*C0-C7*/ "","","","",
+ "PMBUS_REQ_N","PSU_FW_UPDATE_REQ_N",
+ "","BMC_I2C_SSIF_ALERT_L",
+ /*D0-D7*/ "","","","","","","","",
+ /*E0-E7*/ "","","","","","","","",
+ /*F0-F7*/ "","","","","","","","",
+ /*G0-G7*/ "","","","","","",
+ "FM_DEBUG_PORT_PRSNT_N","FM_BMC_DBP_PRESENT_N",
+ /*H0-H7*/ "PWR_BRAKE_L","RUN_POWER_EN",
+ "SHDN_FORCE_L","SHDN_REQ_L",
+ "","","","",
+ /*I0-I7*/ "","","","",
+ "","FLASH_WP_STATUS",
+ "FM_PDB_HEALTH_N","RUN_POWER_PG",
+ /*J0-J7*/ "","","","","","","","",
+ /*K0-K7*/ "","","","","","","","",
+ /*L0-L7*/ "","","","","","","","",
+ /*M0-M7*/ "PCIE_EP_RST_EN","BMC_FRU_WP",
+ "SCM_HPM_STBY_RST_N","SCM_HPM_STBY_EN",
+ "STBY_POWER_PG_3V3","TH500_SHDN_OK_L","","",
+ /*N0-N7*/ "LED_POSTCODE_0","LED_POSTCODE_1",
+ "LED_POSTCODE_2","LED_POSTCODE_3",
+ "LED_POSTCODE_4","LED_POSTCODE_5",
+ "LED_POSTCODE_6","LED_POSTCODE_7",
+ /*O0-O7*/ "HMC_I2C3_FPGA_ALERT_L","FPGA_READY_HMC",
+ "CHASSIS_AC_LOSS_L","BSM_PRSNT_R_N",
+ "PSU_SMB_ALERT_L","FM_TPM_PRSNT_0_N",
+ "","USBDBG_IPMI_EN_L",
+ /*P0-P7*/ "PWR_BTN_BMC_N","IPEX_CABLE_PRSNT_L",
+ "ID_RST_BTN_BMC_N","RST_BMC_RSTBTN_OUT_N",
+ "host0-ready","BMC_READY_CPLD","","BMC_HEARTBEAT_N",
+ /*Q0-Q7*/ "IRQ_PCH_TPM_SPI_N","USB_OC0_REAR_R_N",
+ "UART_MUX_SEL","I2C_MUX_RESET_L",
+ "RSVD_NV_PLT_DETECT","SPI_TPM_INT_L",
+ "CPU_JTAG_MUX_SELECT","THERM_BB_OVERT_L",
+ /*R0-R7*/ "THERM_BB_WARN_L","SPI_BMC_FPGA_INT_L",
+ "CPU_BOOT_DONE","PMBUS_GNT_L",
+ "CHASSIS_PWR_BRK_L","PCIE_WAKE_L",
+ "PDB_THERM_OVERT_L","HMC_I2C2_FPGA_ALERT_L",
+ /*S0-S7*/ "","","SYS_BMC_PWRBTN_R_N","FM_TPM_PRSNT_1_N",
+ "FM_BMC_DEBUG_SW_N","UID_LED_N",
+ "SYS_FAULT_LED_N","RUN_POWER_FAULT_L",
+ /*T0-T7*/ "","","","","","","","",
+ /*U0-U7*/ "","","","","","","","",
+ /*V0-V7*/ "L2_RST_REQ_OUT_L","L0L1_RST_REQ_OUT_L",
+ "BMC_ID_BEEP_SEL","BMC_I2C0_FPGA_ALERT_L",
+ "SMB_BMC_TMP_ALERT","PWR_LED_N",
+ "SYS_RST_OUT_L","IRQ_TPM_SPI_N",
+ /*W0-W7*/ "","","","","","","","",
+ /*X0-X7*/ "","","","","","","","",
+ /*Y0-Y7*/ "","RST_BMC_SELF_HW",
+ "FM_FLASH_LATCH_N","BMC_EMMC_RST_N",
+ "","","","",
+ /*Z0-Z7*/ "","","","","","","","";
+};
+
+&io_expander0 {
+ gpio-line-names =
+ "FPGA_THERM_OVERT_L","FPGA_READY_BMC",
+ "HMC_BMC_DETECT","HMC_PGOOD",
+ "","BMC_SELF_PWR_CYCLE",
+ "FPGA_EROT_FATAL_ERROR_L","WP_HW_EXT_CTRL_L",
+ "EROT_FPGA_RST_L","FPGA_EROT_RECOVERY_L",
+ "BMC_EROT_FPGA_SPI_MUX_SEL","USB2_HUB_RESET_L",
+ "NCSI_CS1_SEL","SGPIO_EN_L",
+ "B2B_IOEXP_INT_L","I2C_BUS_MUX_RESET_L";
+};
+
+&io_expander1 {
+ gpio-line-names =
+ "SEC_FPGA_THERM_OVERT_L","SEC_FPGA_READY_BMC",
+ "","",
+ "","",
+ "SEC_FPGA_EROT_FATAL_ERROR_L","SEC_WP_HW_EXT_CTRL_L",
+ "SEC_EROT_FPGA_RST_L","SEC_FPGA_EROT_RECOVERY_L",
+ "SEC_BMC_EROT_FPGA_SPI_MUX_SEL","",
+ "","",
+ "","SEC_I2C_BUS_MUX_RESET_L";
+};
+
+&io_expander2 {
+ gpio-line-names =
+ "HMC_PRSNT_L","HMC_READY",
+ "HMC_EROT_FATAL_ERROR_L","I2C_MUX_SEL",
+ "HMC_EROT_SPI_MUX_SEL","HMC_EROT_RECOVERY_L",
+ "HMC_EROT_RST_L","GLOBAL_WP_HMC",
+ "FPGA_RST_L","USB2_HUB_RST",
+ "CPU_UART_MUX_SEL","",
+ "","","","";
+};
+
+&io_expander3 {
+ gpio-line-names =
+ "RTC_MUX_SEL","PCI_MUX_SEL","TPM_MUX_SEL","FAN_MUX-SEL",
+ "SGMII_MUX_SEL","DP_MUX_SEL","UPHY3_USB_SEL","NCSI_MUX_SEL",
+ "BMC_PHY_RST","RTC_CLR_L","BMC_12V_CTRL","PS_RUN_IO0_PG",
+ "","","","";
+};
+
+&io_expander4 {
+ gpio-line-names =
+ "stby_power_en_cpld","stby_power_gd_cpld","","",
+ "","","","",
+ "","","","",
+ "","","","";
+};
+
+&io_expander5 {
+ gpio-line-names =
+ "JTAG_MUX_SEL","IOX_BMC_RESET","","",
+ "","","","";
+};
+
+&io_expander6 {
+ gpio-line-names =
+ "OSFP_PHASE_ID0","OSFP_PHASE_ID1",
+ "OSFP_PHASE_ID2","OSFP_PHASE_ID3",
+ "","","","",
+ "OSFP_BOARD_ID0","OSFP_BOARD_ID1",
+ "OSFP_BOARD_ID2","PWRGD_P3V3_N1",
+ "PWRGD_P3V3_N2","","","";
+};
+
+&io_expander7 {
+ gpio-line-names =
+ "RST_CX7_0","RST_CX7_1",
+ "CX0_SSD0_PRSNT_L","CX1_SSD1_PRSNT_L",
+ "CX_BOOT_CMPLT_CX0","CX_BOOT_CMPLT_CX1",
+ "CX_TWARN_CX0_L","CX_TWARN_CX1_L",
+ "CX_OVT_SHDN_CX0","CX_OVT_SHDN_CX1",
+ "FNP_L_CX0","FNP_L_CX1",
+ "","","","";
+};
+
+&io_expander8 {
+ gpio-line-names =
+ "SEC_RST_CX7_0","SEC_RST_CX7_1",
+ "SEC_CX0_SSD0_PRSNT_L","SEC_CX1_SSD1_PRSNT_L",
+ "SEC_CX_BOOT_CMPLT_CX0","SEC_CX_BOOT_CMPLT_CX1",
+ "SEC_CX_TWARN_CX0_L","SEC_CX_TWARN_CX1_L",
+ "SEC_CX_OVT_SHDN_CX0","SEC_CX_OVT_SHDN_CX1",
+ "SEC_FNP_L_CX0","SEC_FNP_L_CX1",
+ "","","","";
+};
--
2.31.1
