[PATCH V1] arm64: dts: add APM Merlin Board device tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




This patch adds the support for APM Merlin board. The Merlin board
is based on the APM X-Gene Shadowcat SoC. This DTS enables PMU,
SATA and Serial.

Signed-off-by: Feng Kan <fkan@xxxxxxx>
---
  V1 Change:
	- add memreserve for spintable.
        - remove clkfreq attribute
	- update spin location, although it is done by bootloader.
	- remove msi reg entry
	- add chosen for stdout path 

 arch/arm64/boot/dts/apm/apm-merlin.dts     |  41 ++++++++
 arch/arm64/boot/dts/apm/apm-shadowcat.dtsi | 154 +++++++++++++++++++++++++++++
 2 files changed, 195 insertions(+)
 create mode 100644 arch/arm64/boot/dts/apm/apm-merlin.dts
 create mode 100644 arch/arm64/boot/dts/apm/apm-shadowcat.dtsi

diff --git a/arch/arm64/boot/dts/apm/apm-merlin.dts b/arch/arm64/boot/dts/apm/apm-merlin.dts
new file mode 100644
index 0000000..3feefbd
--- /dev/null
+++ b/arch/arm64/boot/dts/apm/apm-merlin.dts
@@ -0,0 +1,41 @@
+/*
+ * dts file for AppliedMicro (APM) Merlin Board
+ *
+ * Copyright (C) 2015, Applied Micro Circuits Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+/dts-v1/;
+
+/include/ "apm-shadowcat.dtsi"
+
+/ {
+	model = "APM X-Gene Merlin board";
+	compatible = "apm,merlin", "apm,xgene-shadowcat";
+
+	chosen {
+		linux,stdout-path = &serial0;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = < 0x1 0x00000000 0x0 0x80000000 >;
+	};
+};
+
+&serial0 {
+	status = "ok";
+};
+&sata1 {
+	status = "ok";
+};
+&sata2 {
+	status = "ok";
+};
+&sata3 {
+	status = "ok";
+};
diff --git a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
new file mode 100644
index 0000000..0dc8127
--- /dev/null
+++ b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
@@ -0,0 +1,154 @@
+/*
+ * dts file for AppliedMicro (APM) X-Gene Shadowcat SOC
+ *
+ * Copyright (C) 2015, Applied Micro Circuits Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+/memreserve/ 0x4000000000 0x00010000;
+
+/ {
+	compatible = "apm,xgene-shadowcat";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu@000 {
+			device_type = "cpu";
+			compatible = "apm,strega", "arm,armv8";
+			reg = <0x0 0x000>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x40 0x0000fff8>;
+		};
+		cpu@001 {
+			device_type = "cpu";
+			compatible = "apm,strega", "arm,armv8";
+			reg = <0x0 0x001>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x40 0x0000fff8>;
+		};
+		cpu@100 {
+			device_type = "cpu";
+			compatible = "apm,strega", "arm,armv8";
+			reg = <0x0 0x100>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x40 0x0000fff8>;
+		};
+		cpu@101 {
+			device_type = "cpu";
+			compatible = "apm,strega", "arm,armv8";
+			reg = <0x0 0x101>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x40 0x0000fff8>;
+		};
+		cpu@200 {
+			device_type = "cpu";
+			compatible = "apm,strega", "arm,armv8";
+			reg = <0x0 0x200>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x40 0x0000fff8>;
+		};
+		cpu@201 {
+			device_type = "cpu";
+			compatible = "apm,strega", "arm,armv8";
+			reg = <0x0 0x201>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x40 0x0000fff8>;
+		};
+		cpu@300 {
+			device_type = "cpu";
+			compatible = "apm,strega", "arm,armv8";
+			reg = <0x0 0x300>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x40 0x0000fff8>;
+		};
+		cpu@301 {
+			device_type = "cpu";
+			compatible = "apm,strega", "arm,armv8";
+			reg = <0x0 0x301>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x40 0x0000fff8>;
+		};
+	};
+
+	gic: interrupt-controller@78090000 {
+		compatible = "arm,cortex-a15-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		interrupt-controller;
+		interrupts = <1 9 0xf04>;	/* GIC Maintenence IRQ */
+		reg = <0x0 0x78090000 0x0 0x10000>,	/* GIC Dist */
+		      <0x0 0x780A0000 0x0 0x20000>,	/* GIC CPU */
+		      <0x0 0x780C0000 0x0 0x10000>,	/* GIC VCPU Control */
+		      <0x0 0x780E0000 0x0 0x20000>;	/* GIC VCPU */
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <1 12 0xff04>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 0 0xff04>,	/* Secure Phys IRQ */
+			     <1 13 0xff04>,	/* Non-secure Phys IRQ */
+			     <1 14 0xff04>,	/* Virt IRQ */
+			     <1 15 0xff04>;	/* Hyp IRQ */
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		serial0: serial@10600000 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0 0x10600000 0x0 0x1000>;
+			reg-shift = <2>;
+			clock-frequency = <10000000>;
+			interrupt-parent = <&gic>;
+			interrupts = <0x0 0x4c 0x4>;
+		};
+
+		sata1: sata@1a000000 {
+			compatible = "apm,xgene-ahci";
+			reg = <0x0 0x1a000000 0x0 0x1000>,
+			      <0x0 0x1f200000 0x0 0x1000>,
+			      <0x0 0x1f20d000 0x0 0x1000>,
+			      <0x0 0x1f20e000 0x0 0x1000>;
+			interrupts = <0x0 0x5a 0x4>;
+			dma-coherent;
+		};
+
+		sata2: sata@1a200000 {
+			compatible = "apm,xgene-ahci";
+			reg = <0x0 0x1a200000 0x0 0x1000>,
+			      <0x0 0x1f210000 0x0 0x1000>,
+			      <0x0 0x1f21d000 0x0 0x1000>,
+			      <0x0 0x1f21e000 0x0 0x1000>;
+			interrupts = <0x0 0x5b 0x4>;
+			dma-coherent;
+		};
+
+		sata3: sata@1a400000 {
+			compatible = "apm,xgene-ahci";
+			reg = <0x0 0x1a400000 0x0 0x1000>,
+			      <0x0 0x1f220000 0x0 0x1000>,
+			      <0x0 0x1f22d000 0x0 0x1000>,
+			      <0x0 0x1f22e000 0x0 0x1000>;
+			interrupts = <0x0 0x5c 0x4>;
+			dma-coherent;
+		};
+	};
+};
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux