Hi Randy, On 30/07/24 9:45 am, Randy Dunlap wrote: > EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe > > On 7/29/24 9:09 PM, Parthiban Veerasooran wrote: >> The LAN8650/1 is designed to conform to the OPEN Alliance 10BASE-T1x >> MAC-PHY Serial Interface specification, Version 1.1. The IEEE Clause 4 >> MAC integration provides the low pin count standard SPI interface to any >> microcontroller therefore providing Ethernet functionality without >> requiring MAC integration within the microcontroller. The LAN8650/1 >> operates as an SPI client supporting SCLK clock rates up to a maximum of >> 25 MHz. This SPI interface supports the transfer of both data (Ethernet >> frames) and control (register access). >> >> By default, the chunk data payload is 64 bytes in size. The Ethernet >> Media Access Controller (MAC) module implements a 10 Mbps half duplex >> Ethernet MAC, compatible with the IEEE 802.3 standard. 10BASE-T1S >> physical layer transceiver integrated is into the LAN8650/1. The PHY and >> MAC are connected via an internal Media Independent Interface (MII). >> >> Signed-off-by: Parthiban Veerasooran <Parthiban.Veerasooran@xxxxxxxxxxxxx> >> --- >> MAINTAINERS | 6 + >> drivers/net/ethernet/microchip/Kconfig | 1 + >> drivers/net/ethernet/microchip/Makefile | 1 + >> .../net/ethernet/microchip/lan865x/Kconfig | 19 + >> .../net/ethernet/microchip/lan865x/Makefile | 6 + >> .../net/ethernet/microchip/lan865x/lan865x.c | 391 ++++++++++++++++++ >> 6 files changed, 424 insertions(+) >> create mode 100644 drivers/net/ethernet/microchip/lan865x/Kconfig >> create mode 100644 drivers/net/ethernet/microchip/lan865x/Makefile >> create mode 100644 drivers/net/ethernet/microchip/lan865x/lan865x.c >> > >> diff --git a/drivers/net/ethernet/microchip/lan865x/Kconfig b/drivers/net/ethernet/microchip/lan865x/Kconfig >> new file mode 100644 >> index 000000000000..f3d60d14e202 >> --- /dev/null >> +++ b/drivers/net/ethernet/microchip/lan865x/Kconfig >> @@ -0,0 +1,19 @@ >> +# SPDX-License-Identifier: GPL-2.0-only >> +# >> +# Microchip LAN865x Driver Support >> +# >> + >> +if NET_VENDOR_MICROCHIP >> + >> +config LAN865X >> + tristate "LAN865x support" >> + depends on SPI >> + depends on OA_TC6 > > Since OA_TC6 is described as a library, it would make sense to select OA_TC6 here instead > of depending on it. > OTOH, that might cause some Kconfig dependency issues... I haven't looked into that.Yes that makes sense. I will change it in the next version. Best regards, Parthiban V > >> + help >> + Support for the Microchip LAN8650/1 Rev.B1 MACPHY Ethernet chip. It >> + uses OPEN Alliance 10BASE-T1x Serial Interface specification. >> + >> + To compile this driver as a module, choose M here. The module will be >> + called lan865x. >> + >> +endif # NET_VENDOR_MICROCHIP > > > -- > ~Randy
