Re: [PATCH v6 3/5] arm64: dts: rockchip: Add AP6275P wireless support to Khadas Edge 2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On July 31, 2024 8:11:58 AM Jacobe Zang <jacobe.zang@xxxxxxxxxx> wrote:

Khadas Edge2 uses the PCI-e Ampak AP6275P 2T2R Wi-Fi 6 module. The
pcie@0 node can be used as Bridge1, so the wifi@0 node is used as a
device under the Bridge1.

Co-developed-by: Muhammed Efe Cetin <efectn@xxxxxxxxxxxxxx>
Signed-off-by: Muhammed Efe Cetin <efectn@xxxxxxxxxxxxxx>
Signed-off-by: Jacobe Zang <jacobe.zang@xxxxxxxxxx>
---
.../boot/dts/rockchip/rk3588s-khadas-edge2.dts   | 16 ++++++++++++++++
1 file changed, 16 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts b/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
index dbddfc3bb4641..b80a552dad883 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
@@ -283,6 +283,22 @@ &pcie2x1l2 {
 reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
 vpcie3v3-supply = <&vcc3v3_pcie_wl>;
 status = "okay";
+
+ pcie@0,0 {
+ reg = <0x400000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ device_type = "pci";
+ bus-range = <0x40 0x4f>;
+
+ wifi: wifi@0,0 {
+ compatible = "pci14e4,449d";

Probably need to add "brcm,bcm4329-fmac" as well here.

Regards,
Arend






[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux