From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
The SC8180X platform comes with a multiport DWC3 controller with two
ports, each connected to a pair of HighSpeed and QMP SuperSpeed PHYs.
Describe these blocks.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
Signed-off-by: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sc8180x.dtsi | 152 ++++++++++++++++++++++++++++++++++
1 file changed, 152 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
index 23ef8dc239f7..0e9429684dd9 100644
--- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
@@ -2507,6 +2507,34 @@ usb_sec_hsphy: phy@88e3000 {
status = "disabled";
};
+ usb_mp_hsphy0: phy@88e4000 {
+ compatible = "qcom,sc8180x-usb-hs-phy",
+ "qcom,usb-snps-hs-7nm-phy";
+ reg = <0 0x088e4000 0 0x400>;
+ #phy-cells = <0>;
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "ref";
+
+ resets = <&gcc GCC_QUSB2PHY_MP0_BCR>;
+
+ status = "disabled";
+ };
+
+ usb_mp_hsphy1: phy@88e5000 {
+ compatible = "qcom,sc8180x-usb-hs-phy",
+ "qcom,usb-snps-hs-7nm-phy";
+ reg = <0 0x088e5000 0 0x400>;
+ #phy-cells = <0>;
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "ref";
+
+ resets = <&gcc GCC_QUSB2PHY_MP1_BCR>;
+
+ status = "disabled";
+ };
+
usb_prim_qmpphy: phy@88e8000 {
compatible = "qcom,sc8180x-qmp-usb3-dp-phy";
reg = <0 0x088e8000 0 0x3000>;
@@ -2555,6 +2583,60 @@ port@2 {
};
};
+ usb_mp_qmpphy0: phy@88eb000 {
+ compatible = "qcom,sc8180x-qmp-usb3-uni-phy";
+ reg = <0 0x088eb000 0 0x1000>;
+
+ clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>,
+ <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
+ <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>,
+ <&gcc GCC_USB3_MP_PHY_PIPE_0_CLK>;
+ clock-names = "aux",
+ "ref",
+ "com_aux",
+ "pipe";
+
+ resets = <&gcc GCC_USB3_UNIPHY_MP0_BCR>,
+ <&gcc GCC_USB3UNIPHY_PHY_MP0_BCR>;
+ reset-names = "phy", "phy_phy";
+
+ power-domains = <&gcc USB30_MP_GDSC>;
+
+ #clock-cells = <0>;
+ clock-output-names = "usb2_phy0_pipe_clk";
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ usb_mp_qmpphy1: phy@88ec000 {
+ compatible = "qcom,sc8180x-qmp-usb3-uni-phy";
+ reg = <0 0x088ec000 0 0x1000>;
+
+ clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>,
+ <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
+ <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>,
+ <&gcc GCC_USB3_MP_PHY_PIPE_1_CLK>;
+ clock-names = "aux",
+ "ref",
+ "com_aux",
+ "pipe";
+
+ resets = <&gcc GCC_USB3_UNIPHY_MP1_BCR>,
+ <&gcc GCC_USB3UNIPHY_PHY_MP1_BCR>;
+ reset-names = "phy", "phy_phy";
+
+ power-domains = <&gcc USB30_MP_GDSC>;
+
+ #clock-cells = <0>;
+ clock-output-names = "usb2_phy1_pipe_clk";
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
usb_sec_qmpphy: phy@88ee000 {
compatible = "qcom,sc8180x-qmp-usb3-dp-phy";
reg = <0 0x088ed000 0 0x3000>;
@@ -2622,6 +2704,76 @@ gem_noc: interconnect@9680000 {
qcom,bcm-voters = <&apps_bcm_voter>;
};
+ usb_mp: usb@a4f8800 {
+ compatible = "qcom,sc8180x-dwc3-mp", "qcom,dwc3";
+ reg = <0 0x0a4f8800 0 0x400>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ dma-ranges;
+
+ clocks = <&gcc GCC_CFG_NOC_USB3_MP_AXI_CLK>,
+ <&gcc GCC_USB30_MP_MASTER_CLK>,
+ <&gcc GCC_AGGRE_USB3_MP_AXI_CLK>,
+ <&gcc GCC_USB30_MP_SLEEP_CLK>,
+ <&gcc GCC_USB30_MP_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB3_SEC_CLKREF_CLK>;
+ clock-names = "cfg_noc",
+ "core",
+ "iface",
+ "sleep",
+ "mock_utmi",
+ "xo";
+
+ interconnects = <&aggre1_noc MASTER_USB3_2 0 &mc_virt SLAVE_EBI_CH0 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3_2 0>;
+ interconnect-names = "usb-ddr", "apps-usb";
+
+ assigned-clocks = <&gcc GCC_USB30_MP_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_MP_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <200000000>;
+
+ interrupts-extended = <&intc GIC_SPI 656 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 655 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 658 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 657 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 59 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 46 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 71 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 68 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 7 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pwr_event_1", "pwr_event_2",
+ "hs_phy_1", "hs_phy_2",
+ "dp_hs_phy_1", "dm_hs_phy_1",
+ "dp_hs_phy_2", "dm_hs_phy_2",
+ "ss_phy_1", "ss_phy_2";
+
+ power-domains = <&gcc USB30_MP_GDSC>;
+
+ resets = <&gcc GCC_USB30_MP_BCR>;
+
+ status = "disabled";
+
+ usb_mp_dwc3: usb@a400000 {
+ compatible = "snps,dwc3";
+ reg = <0 0x0a400000 0 0xcd00>;
+ interrupts = <GIC_SPI 654 IRQ_TYPE_LEVEL_HIGH>;
+ iommus = <&apps_smmu 0x60 0>;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_enblslpm_quirk;
+ phys = <&usb_mp_hsphy0>,
+ <&usb_mp_qmpphy0>,
+ <&usb_mp_hsphy1>,
+ <&usb_mp_qmpphy1>;
+ phy-names = "usb2-0",
+ "usb3-0",
+ "usb2-1",
+ "usb3-1";
+ dr_mode = "host";
+ };
+ };
+
usb_prim: usb@a6f8800 {
compatible = "qcom,sc8180x-dwc3", "qcom,dwc3";
reg = <0 0x0a6f8800 0 0x400>;
--
2.45.2
