[PATCH v2 2/7] clk: qcom: gcc-sc8180x: Add missing USB MP resets

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>

The USB multiport controller needs a few additional resets, add these to
the driver.

Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Signed-off-by: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
---
 drivers/clk/qcom/gcc-sc8180x.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/clk/qcom/gcc-sc8180x.c b/drivers/clk/qcom/gcc-sc8180x.c
index ad135bfa4c76..113f9513b2df 100644
--- a/drivers/clk/qcom/gcc-sc8180x.c
+++ b/drivers/clk/qcom/gcc-sc8180x.c
@@ -4546,6 +4546,10 @@ static const struct qcom_reset_map gcc_sc8180x_resets[] = {
 	[GCC_USB3_PHY_SEC_BCR] = { 0x50018 },
 	[GCC_USB3PHY_PHY_SEC_BCR] = { 0x5001c },
 	[GCC_USB3_DP_PHY_SEC_BCR] = { 0x50020 },
+	[GCC_USB3_UNIPHY_MP0_BCR] = { 0x50024 },
+	[GCC_USB3_UNIPHY_MP1_BCR] = { 0x50028 },
+	[GCC_USB3UNIPHY_PHY_MP0_BCR] = { 0x5002c },
+	[GCC_USB3UNIPHY_PHY_MP1_BCR] = { 0x50030 },
 	[GCC_SDCC2_BCR] = { 0x14000 },
 	[GCC_SDCC4_BCR] = { 0x16000 },
 	[GCC_TSIF_BCR] = { 0x36000 },

-- 
2.45.2





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux