Re: [PATCH v5 4/5] wifi: brcmfmac: Add optional lpo clock enable support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 7/30/2024 5:30 AM, Jacobe Zang wrote:
WiFi modules often require 32kHz clock to function. Add support to
enable the clock to PCIe driver.

Co-developed-by: Ondrej Jirman <megi@xxxxxx>
Signed-off-by: Ondrej Jirman <megi@xxxxxx>
Signed-off-by: Jacobe Zang <jacobe.zang@xxxxxxxxxx>
---
  drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c | 8 ++++++++
  1 file changed, 8 insertions(+)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
index e406e11481a62..6246e3fd7399f 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
@@ -6,6 +6,7 @@
  #include <linux/of.h>
  #include <linux/of_irq.h>
  #include <linux/of_net.h>
+#include <linux/clk.h>
#include <defs.h>
  #include "debug.h"
@@ -70,6 +71,7 @@ void brcmf_of_probe(struct device *dev, enum brcmf_bus_type bus_type,
  {
  	struct brcmfmac_sdio_pd *sdio = &settings->bus.sdio;
  	struct device_node *root, *np = dev->of_node;
+	struct clk *clk;
  	const char *prop;
  	int irq;
  	int err;
@@ -113,6 +115,12 @@ void brcmf_of_probe(struct device *dev, enum brcmf_bus_type bus_type,
  		of_node_put(root);
  	}
+ clk = devm_clk_get_optional_enabled(dev, "lpo");
+	if (!IS_ERR_OR_NULL(clk)) {
+		brcmf_dbg(INFO, "enabling 32kHz clock\n");
+		clk_set_rate(clk, 32768);
+	}
+
  	if (!np || !of_device_is_compatible(np, "brcm,bcm4329-fmac"))
  		return;

This if-statement should be the first check in brcmf_of_probe(). Can you include that change in your patch.

Regards,
Arend




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux