Re: [PATCH v1 2/2] ARM: dts: samsung: Add cache information to the Exynos542x SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Marek,

On Tue, 30 Jul 2024 at 17:14, Marek Szyprowski <m.szyprowski@xxxxxxxxxxx> wrote:
>
>
> On 30.07.2024 11:13, Anand Moon wrote:
> > As per Exynos 5422 user manual add missing cache information to
> > the Exynos542x SoC.
> >
> > - Each Cortex-A7 core has 32 KB of instruction cache and
> >       32 KB of L1 data cache available.
> > - Each Cortex-A15 core has 32 KB of L1 instruction cache and
> >       32 KB of L1 data cache available.
> > - The little (A7) cluster has 512 KB of unified L2 cache available.
> > - The big (A15) cluster has 2 MB of unified L2 cache available.
> >
> > Features:
> > - Exynos 5422 support cache coherency interconnect (CCI) bus with
> >    L2 cache snooping capability. This hardware automatic L2 cache
> >    snooping removes the efforts of synchronizing the contents of the
> >    two L2 caches in core switching event.
> >
> > Signed-off-by: Anand Moon <linux.amoon@xxxxxxxxx>
>
>
> The provided values are not correct. Please refer to commit 5f41f9198f29
> ("ARM: 8864/1: Add workaround for I-Cache line size mismatch between CPU
> cores"), which adds workaround for different l1 icache line size between
> big and little CPUs. This workaround gets enabled on all Exynos542x/5800
> boards.
>
Ok, I have just referred to the Exynos 5422 user manual for this patch,
This patch is just updating the cache size for CPU for big.litle architecture..

Thanks
-Anand
>
> > ---
> >   .../arm/boot/dts/samsung/exynos5422-cpus.dtsi | 74 +++++++++++++++++++
> >   1 file changed, 74 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/samsung/exynos5422-cpus.dtsi b/arch/arm/boot/dts/samsung/exynos5422-cpus.dtsi
> > index 412a0bb4b988..9b9b2bdfb522 100644
> > --- a/arch/arm/boot/dts/samsung/exynos5422-cpus.dtsi
> > +++ b/arch/arm/boot/dts/samsung/exynos5422-cpus.dtsi
> > @@ -59,6 +59,13 @@ cpu0: cpu@100 {
> >                       reg = <0x100>;
> >                       clocks = <&clock CLK_KFC_CLK>;
> >                       clock-frequency = <1000000000>;
> > +                     d-cache-line-size = <32>;
> > +                     d-cache-size = <0x8000>;
> > +                     d-cache-sets = <32>;
> > +                     i-cache-line-size = <32>;
> > +                     i-cache-size = <0x8000>;
> > +                     i-cache-sets = <32>;
> > +                     next-level-cache = <&L2_a7>;
> >                       cci-control-port = <&cci_control0>;
> >                       operating-points-v2 = <&cluster_a7_opp_table>;
> >                       #cooling-cells = <2>; /* min followed by max */
> > @@ -72,6 +79,13 @@ cpu1: cpu@101 {
> >                       reg = <0x101>;
> >                       clocks = <&clock CLK_KFC_CLK>;
> >                       clock-frequency = <1000000000>;
> > +                     d-cache-line-size = <32>;
> > +                     d-cache-size = <0x8000>;
> > +                     d-cache-sets = <32>;
> > +                     i-cache-line-size = <32>;
> > +                     i-cache-size = <0x8000>;
> > +                     i-cache-sets = <32>;
> > +                     next-level-cache = <&L2_a7>;
> >                       cci-control-port = <&cci_control0>;
> >                       operating-points-v2 = <&cluster_a7_opp_table>;
> >                       #cooling-cells = <2>; /* min followed by max */
> > @@ -85,6 +99,13 @@ cpu2: cpu@102 {
> >                       reg = <0x102>;
> >                       clocks = <&clock CLK_KFC_CLK>;
> >                       clock-frequency = <1000000000>;
> > +                     d-cache-line-size = <32>;
> > +                     d-cache-size = <0x8000>;
> > +                     d-cache-sets = <32>;
> > +                     i-cache-line-size = <32>;
> > +                     i-cache-size = <0x8000>;
> > +                     i-cache-sets = <32>;
> > +                     next-level-cache = <&L2_a7>;
> >                       cci-control-port = <&cci_control0>;
> >                       operating-points-v2 = <&cluster_a7_opp_table>;
> >                       #cooling-cells = <2>; /* min followed by max */
> > @@ -98,6 +119,13 @@ cpu3: cpu@103 {
> >                       reg = <0x103>;
> >                       clocks = <&clock CLK_KFC_CLK>;
> >                       clock-frequency = <1000000000>;
> > +                     d-cache-line-size = <32>;
> > +                     d-cache-size = <0x8000>;
> > +                     d-cache-sets = <32>;
> > +                     i-cache-line-size = <32>;
> > +                     i-cache-size = <0x8000>;
> > +                     i-cache-sets = <32>;
> > +                     next-level-cache = <&L2_a7>;
> >                       cci-control-port = <&cci_control0>;
> >                       operating-points-v2 = <&cluster_a7_opp_table>;
> >                       #cooling-cells = <2>; /* min followed by max */
> > @@ -111,6 +139,13 @@ cpu4: cpu@0 {
> >                       reg = <0x0>;
> >                       clocks = <&clock CLK_ARM_CLK>;
> >                       clock-frequency = <1800000000>;
> > +                     d-cache-line-size = <32>;
> > +                     d-cache-size = <0x8000>;
> > +                     d-cache-sets = <32>;
> > +                     i-cache-line-size = <32>;
> > +                     i-cache-size = <0x8000>;
> > +                     i-cache-sets = <32>;
> > +                     next-level-cache = <&L2_a15>;
> >                       cci-control-port = <&cci_control1>;
> >                       operating-points-v2 = <&cluster_a15_opp_table>;
> >                       #cooling-cells = <2>; /* min followed by max */
> > @@ -124,6 +159,13 @@ cpu5: cpu@1 {
> >                       reg = <0x1>;
> >                       clocks = <&clock CLK_ARM_CLK>;
> >                       clock-frequency = <1800000000>;
> > +                     d-cache-line-size = <32>;
> > +                     d-cache-size = <0x8000>;
> > +                     d-cache-sets = <32>;
> > +                     i-cache-line-size = <32>;
> > +                     i-cache-size = <0x8000>;
> > +                     i-cache-sets = <32>;
> > +                     next-level-cache = <&L2_a15>;
> >                       cci-control-port = <&cci_control1>;
> >                       operating-points-v2 = <&cluster_a15_opp_table>;
> >                       #cooling-cells = <2>; /* min followed by max */
> > @@ -137,6 +179,13 @@ cpu6: cpu@2 {
> >                       reg = <0x2>;
> >                       clocks = <&clock CLK_ARM_CLK>;
> >                       clock-frequency = <1800000000>;
> > +                     d-cache-line-size = <32>;
> > +                     d-cache-size = <0x8000>;
> > +                     d-cache-sets = <32>;
> > +                     i-cache-line-size = <32>;
> > +                     i-cache-size = <0x8000>;
> > +                     i-cache-sets = <32>;
> > +                     next-level-cache = <&L2_a15>;
> >                       cci-control-port = <&cci_control1>;
> >                       operating-points-v2 = <&cluster_a15_opp_table>;
> >                       #cooling-cells = <2>; /* min followed by max */
> > @@ -150,12 +199,37 @@ cpu7: cpu@3 {
> >                       reg = <0x3>;
> >                       clocks = <&clock CLK_ARM_CLK>;
> >                       clock-frequency = <1800000000>;
> > +                     d-cache-line-size = <32>;
> > +                     d-cache-size = <0x8000>;
> > +                     d-cache-sets = <32>;
> > +                     i-cache-line-size = <32>;
> > +                     i-cache-size = <0x8000>;
> > +                     i-cache-sets = <32>;
> > +                     next-level-cache = <&L2_a15>;
> >                       cci-control-port = <&cci_control1>;
> >                       operating-points-v2 = <&cluster_a15_opp_table>;
> >                       #cooling-cells = <2>; /* min followed by max */
> >                       capacity-dmips-mhz = <1024>;
> >                       dynamic-power-coefficient = <310>;
> >               };
> > +
> > +             L2_a7: l2-cache-cluster0 {
> > +                     compatible = "cache";
> > +                     cache-level = <2>;
> > +                     cache-unified;
> > +                     cache-size = <0x80000>; /* L2. 512 KB */
> > +                     cache-line-size = <64>;
> > +                     cache-sets = <512>;
> > +             };
> > +
> > +             L2_a15: l2-cache-cluster1 {
> > +                     compatible = "cache";
> > +                     cache-level = <2>;
> > +                     cache-unified;
> > +                     cache-size = <0x200000>; /* L2, 2M */
> > +                     cache-line-size = <64>;
> > +                     cache-sets = <512>;
> > +             };
> >       };
> >   };
> >
>
> Best regards
> --
> Marek Szyprowski, PhD
> Samsung R&D Institute Poland
>




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux