Re: [PATCH V2 0/7] Add power domain and MSI functionality with PCIe host generic ECAM driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Jul 29, 2024 at 10:19:45AM -0700, Mayank Rana wrote:
> Hi Bjorn / Mani
> 
> Gentle ping for your review/feedback on this series.
> Thank you.
> 

I was waiting for your reply for my comment [1]. Because that will have
influence on this series.

- Mani

[1] https://lore.kernel.org/linux-pci/20240724095407.GA2347@thinkpad/

> Regards,
> Mayank
> 
> On 7/15/2024 11:13 AM, Mayank Rana wrote:
> > Based on previously received feedback, this patch series adds functionalities
> > with existing PCIe host generic ECAM driver (pci-host-generic.c) to get PCIe
> > host root complex functionality on Qualcomm SA8775P auto platform.
> > 
> > Previously sent RFC patchset to have separate Qualcomm PCIe ECAM platform driver:
> > https://lore.kernel.org/all/d10199df-5fb3-407b-b404-a0a4d067341f@xxxxxxxxxxx/T/
> > 
> > 1. Interface to allow requesting firmware to manage system resources and performing
> > PCIe Link up (devicetree binding in terms of power domain and runtime PM APIs is used in driver)
> > 2. Performing D3 cold with system suspend and D0 with system resume (usage of GenPD
> > framework based power domain controls these operations)
> > 3. SA8775P is using Synopsys Designware PCIe controller which supports MSI controller.
> > This MSI functionality is used with PCIe host generic driver after splitting existing MSI
> > functionality from pcie-designware-host.c file into pcie-designware-msi.c file.
> > 
> > Below architecture is used on Qualcomm SA8775P auto platform to get ECAM compliant PCIe
> > controller based functionality. Here firmware VM based PCIe driver takes care of resource
> > management and performing PCIe link related handling (D0 and D3cold). Linux VM based PCIe
> > host generic driver uses power domain to request firmware VM to perform these operations
> > using SCMI interface.
> > ----------------
> > 
> > 
> >                                     ┌────────────────────────┐
> >                                     │                        │
> >    ┌──────────────────────┐         │     SHARED MEMORY      │            ┌──────────────────────────┐
> >    │     Firmware VM      │         │                        │            │         Linux VM         │
> >    │ ┌─────────┐          │         │                        │            │    ┌────────────────┐    │
> >    │ │ Drivers │ ┌──────┐ │         │                        │            │    │   PCIE host    │    │
> >    │ │ PCIE PHY◄─┤      │ │         │   ┌────────────────┐   │            │    │  generic driver│    │
> >    │ │         │ │ SCMI │ │         │   │                │   │            │    │                │    │
> >    │ │PCIE CTL │ │      │ ├─────────┼───►    PCIE        ◄───┼─────┐      │    └──┬──────────▲──┘    │
> >    │ │         ├─►Server│ │         │   │    SHMEM       │   │     │      │       │          │       │
> >    │ │Clk, Vreg│ │      │ │         │   │                │   │     │      │    ┌──▼──────────┴──┐    │
> >    │ │GPIO,GDSC│ └─▲──┬─┘ │         │   └────────────────┘   │     └──────┼────┤PCIE SCMI Inst  │    │
> >    │ └─────────┘   │  │   │         │                        │            │    └──▲──────────┬──┘    │
> >    │               │  │   │         │                        │            │       │          │       │
> >    └───────────────┼──┼───┘         │                        │            └───────┼──────────┼───────┘
> >                    │  │             │                        │                    │          │
> >                    │  │             └────────────────────────┘                    │          │
> >                    │  │                                                           │          │
> >                    │  │                                                           │          │
> >                    │  │                                                           │          │
> >                    │  │                                                           │IRQ       │HVC
> >                IRQ │  │HVC                                                        │          │
> >                    │  │                                                           │          │
> >                    │  │                                                           │          │
> >                    │  │                                                           │          │
> > ┌─────────────────┴──▼───────────────────────────────────────────────────────────┴──────────▼──────────────┐
> > │                                                                                                          │
> > │                                                                                                          │
> > │                                      HYPERVISOR                                                          │
> > │                                                                                                          │
> > │                                                                                                          │
> > │                                                                                                          │
> > └──────────────────────────────────────────────────────────────────────────────────────────────────────────┘
> >    ┌─────────────┐    ┌─────────────┐  ┌──────────┐   ┌───────────┐   ┌─────────────┐  ┌────────────┐
> >    │             │    │             │  │          │   │           │   │  PCIE       │  │   PCIE     │
> >    │   CLOCK     │    │   REGULATOR │  │   GPIO   │   │   GDSC    │   │  PHY        │  │ controller │
> >    └─────────────┘    └─────────────┘  └──────────┘   └───────────┘   └─────────────┘  └────────────┘
> > ----------
> > Changes in V2:
> > - Drop new PCIe Qcom ECAM driver, and use existing PCIe designware based MSI functionality
> > - Add power domain based functionality within existing ECAM driver
> > 
> > Tested:
> > - Validated NVME functionality with PCIe0 and PCIe1 on SA8775P-RIDE platform
> > 
> > Mayank Rana (7):
> >    PCI: dwc: Move MSI related code to separate file
> >    PCI: dwc: Add msi_ops to allow DBI based MSI register access
> >    PCI: dwc: Add pcie-designware-msi driver kconfig option
> >    dt-bindings: PCI: host-generic-pci: Add power-domains binding
> >    PCI: host-generic: Add power domain based handling for PCIe controller
> >    dt-bindings: PCI: host-generic-pci: Add snps,dw-pcie-ecam-msi binding
> >    PCI: host-generic: Add dwc MSI based MSI functionality
> > 
> >   .../devicetree/bindings/pci/host-generic-pci.yaml  |  64 +++
> >   drivers/pci/controller/dwc/Kconfig                 |   8 +
> >   drivers/pci/controller/dwc/Makefile                |   1 +
> >   drivers/pci/controller/dwc/pci-keystone.c          |  12 +-
> >   drivers/pci/controller/dwc/pcie-designware-host.c  | 438 ++-------------------
> >   drivers/pci/controller/dwc/pcie-designware-msi.c   | 413 +++++++++++++++++++
> >   drivers/pci/controller/dwc/pcie-designware-msi.h   |  63 +++
> >   drivers/pci/controller/dwc/pcie-designware.c       |   1 +
> >   drivers/pci/controller/dwc/pcie-designware.h       |  26 +-
> >   drivers/pci/controller/dwc/pcie-rcar-gen4.c        |   1 +
> >   drivers/pci/controller/dwc/pcie-tegra194.c         |   5 +-
> >   drivers/pci/controller/pci-host-generic.c          | 127 +++++-
> >   12 files changed, 723 insertions(+), 436 deletions(-)
> >   create mode 100644 drivers/pci/controller/dwc/pcie-designware-msi.c
> >   create mode 100644 drivers/pci/controller/dwc/pcie-designware-msi.h
> > 

-- 
மணிவண்ணன் சதாசிவம்




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux