On Mon, 2024-07-29 at 17:12 -0500, Patrick Williams wrote:
> On Tue, Jul 23, 2024 at 05:23:01PM +0800, Delphine CC Chiu wrote:
> > Add ina233/ina28 support for medusa board adc sensors
> >
> > Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
> > ---
> > .../dts/aspeed/aspeed-bmc-facebook-yosemite4.dts | 13 +++++++++++++
> > 1 file changed, 13 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
> > index 98eeee49b082..49500db53a13 100644
> > --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
> > +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
> > @@ -915,6 +915,19 @@ power-sensor@40 {
> > reg = <0x40>;
> > };
> >
> > + power-sensor@41 {
> > + compatible = "ti,ina233";
> > + resistor-calibration = /bits/ 16 <0x0a00>;
> > + current-lsb= /bits/ 16 <0x0001>;
> > + reg = <0x41>;
> > + };
>
> This depends on this unmerged patchset, right?
>
> https://lore.kernel.org/lkml/4a1cb223-448c-3e93-eb38-d86f543659e3@xxxxxxxxxxxx/
>
> Please resolve the issues Guenter raised.
Probably best to drop these nodes until those issues are resolved and
the binding patch is merged.
Andrew
